Revision notes

Chapter 4 Inverse Trigonometric Functions: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Periodic, odd and even functions, and why an inverse needs a restricted domain

Here n stands for any integer
FunctionDomainRange
sin xℝ[−1, 1]
cos xℝ[−1, 1]
tan xℝ \ {(2n + 1)π/2}ℝ
cosec xℝ \ {nπ}ℝ \ (−1, 1)
sec xℝ \ {(2n + 1)π/2}ℝ \ (−1, 1)
cot xℝ \ {nπ}ℝ

From a trigonometric function to its inverse

  1. Start with f on its full domain It is periodic, so it repeats its values: not one-to-one.
  2. Choose a restricted interval f must be one-to-one there and still cover its whole range.
  3. f is now a bijection Each output comes from exactly one input.
  4. Define f⁻¹ f⁻¹(x) = y exactly when f(y) = x and y lies in the restricted interval.
  5. Draw f⁻¹ Reflect the restricted graph of f in the line y = x.

A function has an inverse only where it is one-to-one. Restrict the domain first; then the graph of f⁻¹ is the reflection of the graph of f in the line y = x.

— The key idea of this chapter

Key takeaways: sin, cos, sec and cosec have period 2π; tan and cot have period π; a sum has period equal to the lcm of the periods. Odd functions are symmetric about the origin, even functions about the y-axis. A function needs to be one-to-one to have an inverse, so each trigonometric function is first restricted, and the inverse graph is the reflection in y = x.

Read the full lesson

Lesson 2

Sine, cosine and their inverses: graphs, principal values and sinusoids

Inverse sine and inverse cosine side by side

  • y = sin⁻¹ x
    • Domain [−1, 1]
    • Range [−π/2, π/2]
    • Increasing
    • Odd: passes through the origin
    • sin⁻¹ 0 = 0, sin⁻¹ 1 = π/2
  • y = cos⁻¹ x
    • Domain [−1, 1]
    • Range [0, π]
    • Decreasing
    • Neither odd nor even
    • cos⁻¹ 0 = π/2, cos⁻¹ 1 = 0

sin⁻¹ : [−1, 1] → [−π/2, π/2] and cos⁻¹ : [−1, 1] → [0, π]. f⁻¹(f(x)) = x only when x lies in the principal domain; otherwise first replace x by the angle in the principal domain with the same sine or cosine.

— Inverse sine and cosine

Key takeaways: sine is restricted to [−π/2, π/2] and cosine to [0, π]; sin⁻¹ is odd and increasing, cos⁻¹ is decreasing and neither odd nor even. An inverse expression is defined only when its input lies in [−1, 1]. y = A sin αx has amplitude |A| and period 2π/|α|.

Read the full lesson

Lesson 3

Tangent, cosecant, secant and cotangent inverses and the table of principal values

Domains and principal-value ranges
FunctionPrincipal domainInverseDomain of inverseRange of principal value branch
sine[−π/2, π/2]sin⁻¹[−1, 1][−π/2, π/2]
cosine[0, π]cos⁻¹[−1, 1][0, π]
tangent(−π/2, π/2)tan⁻¹ℝ(−π/2, π/2)
cosecant[−π/2, π/2] \ {0}cosec⁻¹ℝ \ (−1, 1)[−π/2, π/2] \ {0}
secant[0, π] \ {π/2}sec⁻¹ℝ \ (−1, 1)[0, π] \ {π/2}
cotangent(0, π)cot⁻¹ℝ(0, π)

Which range does the answer live in?

  • Range around zero Negative inputs give negative angles.
    • sin⁻¹: [−π/2, π/2]
    • tan⁻¹: (−π/2, π/2)
    • cosec⁻¹: [−π/2, π/2] without 0
  • Range from 0 to π Negative inputs give obtuse angles.
    • cos⁻¹: [0, π]
    • sec⁻¹: [0, π] without π/2
    • cot⁻¹: (0, π)

tan⁻¹ : ℝ → (−π/2, π/2); cosec⁻¹ : ℝ \ (−1, 1) → [−π/2, π/2] \ {0}; sec⁻¹ : ℝ \ (−1, 1) → [0, π] \ {π/2}; cot⁻¹ : ℝ → (0, π).

— The four remaining ranges

Key takeaways: tan x has period π, vertical asymptotes at odd multiples of π/2 and no amplitude. tan⁻¹ and cot⁻¹ accept every real number; cosec⁻¹ and sec⁻¹ accept only |x| ≥ 1. A principal value must lie in the range in the table; if the obvious angle does not, use periodicity or symmetry to move to one that does.

Read the full lesson

Lesson 4

Properties I to V: compositions, reciprocal, reflection and cofunction identities

Evaluating f⁻¹(f(x)) for any x

  1. Is x in the principal domain? If yes, the answer is x itself.
  2. If not, reduce x Subtract multiples of the period to bring x near the principal domain.
  3. Use a symmetry sin(π − x) = sin x, cos(−x) = cos x, cos(2π − x) = cos x.
  4. Check the new angle x₁ It must be in the principal domain and satisfy f(x₁) = f(x).
  5. Answer x₁ f⁻¹(f(x)) = x₁.
Changing x to −x
Odd type (range around 0)Type with range from 0 to π
sin⁻¹(−x) = −sin⁻¹ x, x ∈ [−1, 1]cos⁻¹(−x) = π − cos⁻¹ x, x ∈ [−1, 1]
tan⁻¹(−x) = −tan⁻¹ x, x ∈ ℝcot⁻¹(−x) = π − cot⁻¹ x, x ∈ ℝ
cosec⁻¹(−x) = −cosec⁻¹ x, |x| ≥ 1sec⁻¹(−x) = π − sec⁻¹ x, |x| ≥ 1

sin⁻¹ x + cos⁻¹ x = π/2 for x ∈ [−1, 1]; tan⁻¹ x + cot⁻¹ x = π/2 for x ∈ ℝ; cosec⁻¹ x + sec⁻¹ x = π/2 for |x| ≥ 1.

— Cofunction inverse identities

Key takeaways: f⁻¹(f(x)) = x only inside the principal domain; outside it, move to the equivalent angle that is inside. sin⁻¹, tan⁻¹ and cosec⁻¹ are odd, while cos⁻¹(−x), sec⁻¹(−x) and cot⁻¹(−x) equal π minus the original. Each pair sin/cos, tan/cot and cosec/sec of inverses adds up to π/2.

Read the full lesson

Lesson 5

Properties VI to X: sum, double and triple angle formulas and solving equations

Solving an equation in inverse trigonometric functions

  1. Combine terms Use cofunction, sum or double angle properties.
  2. Take tan, sin or cos of both sides This gives an ordinary algebraic equation.
  3. Solve the algebra Factorise the quadratic or simplify.
  4. Substitute back Reject any root outside a domain, or one that breaks a condition such as xy < 1.

tan⁻¹ x + tan⁻¹ y = tan⁻¹((x + y)/(1 − xy)) only when xy < 1. Always check the condition and substitute every root back into the original equation.

— The most used formula and its trap

Key takeaways: the sum formulas come from the addition formulas and carry conditions that keep the answer in the principal range. 2 tan⁻¹ x can be written with tan⁻¹, cos⁻¹ or sin⁻¹. A reference triangle converts one inverse function into another. When solving, reduce to algebra, then test each root in the original equation.

Read the full lesson

Privacy · Terms · Refunds · Delivery