• Practice
  • About 17 min
  • 5 practice questions

Tangent, cosecant, secant and cotangent inverses and the table of principal values

Sketch y = tan x and y = tan⁻¹ x, state the principal domains of cosec, sec and cot and the ranges of their inverses, and find principal values of all six inverse trigonometric functions.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the graph of y = tan x: period, asymptotes and symmetry.
  • Define tan⁻¹ x and sketch its graph.
  • State the principal domains of cosec, sec and cot and the ranges of cosec⁻¹, sec⁻¹ and cot⁻¹ used in the Tamil Nadu textbook.
  • Use the full table of domains and ranges to find principal values.

Sine and cosine are bounded between −1 and 1. The other four functions are not: their graphs shoot off to infinity near certain angles. That changes how their inverses look, and it is why their ranges contain gaps such as \{0} or \{π/2}. Learning these ranges exactly is the key to every principal value question.

The tangent function

tan x = sin x / cos x is defined except where cos x = 0, that is, except at x = (2n + 1)π/2. Since tan(x + π) = tan x, its period is π. On (−π/2, π/2) the values rise from very large negative numbers through tan 0 = 0 to very large positive numbers; for example tan(−π/4) = −1 and tan(π/4) = 1. Near x = π/2 the graph climbs without limit, so the lines x = (2n + 1)π/2 are vertical asymptotes.

  • The graph breaks at x = (2n + 1)π/2: tan x is not continuous on ℝ.
  • It is symmetric about the origin: tan x is odd.
  • It has no maximum and no minimum, so the word amplitude is not used for tan x.
  • y = a tan bx completes one cycle for −π/(2b) < x < π/(2b), has period π/|b|, and its asymptotes are x = π/(2b) + kπ/b, k ∈ Z.

The inverse tangent function

On (−π/2, π/2) tangent is one-to-one and takes every real value. So for every real x, tan⁻¹ x is the unique y in (−π/2, π/2) with tan y = x; tan⁻¹ : ℝ → (−π/2, π/2). Then tan(tan⁻¹ x) = x for every real x, while tan⁻¹(tan x) = x only for −π/2 < x < π/2. The graph of y = tan⁻¹ x is the reflection of the middle branch of tan x in y = x: it is continuous and increasing on all of ℝ, passes through the origin, is symmetric about the origin (tan⁻¹ is odd), and flattens towards the horizontal lines y = π/2 and y = −π/2 without ever reaching them.

Cosecant, secant and cotangent

Cosecant. cosec x = 1/sin x is defined for x ≠ nπ and its values satisfy |cosec x| ≥ 1. On [−π/2, π/2] \ {0} it is one-to-one and takes every value in ℝ \ (−1, 1). So cosec⁻¹ : ℝ \ (−1, 1) → [−π/2, π/2] \ {0}: cosec⁻¹ x = y exactly when cosec y = x and y lies in [−π/2, π/2] with y ≠ 0.

Secant. sec x = 1/cos x is defined for x ≠ (2n + 1)π/2, with |sec x| ≥ 1. Its principal domain is [0, π] \ {π/2}, so sec⁻¹ : ℝ \ (−1, 1) → [0, π] \ {π/2}: sec⁻¹ x = y exactly when sec y = x and y lies in [0, π] with y ≠ π/2. A quick way to sketch sec x or cosec x: draw cos x or sin x, mark vertical asymptotes where it is zero, and take reciprocals of the y-values.

Cotangent. cot x is defined for x ≠ nπ, has period π, and on (0, π) falls from very large positive values to very large negative values, taking every real value once. So cot⁻¹ : ℝ → (0, π): cot⁻¹ x = y exactly when cot y = x and 0 < y < π. Note that the range is (0, π), not (−π/2, π/2).

Principal values: the complete table

The principal value of an inverse trigonometric function at x is its value at x, which always lies in the range of the principal branch. The Tamil Nadu textbook also notes that when two candidate values are equal in size but opposite in sign, the principal value is the positive one. Memorise the last column of this table: almost every error in this chapter comes from using the wrong range.

Domains and principal-value ranges
FunctionPrincipal domainInverseDomain of inverseRange of principal value branch
sine[−π/2, π/2]sin⁻¹[−1, 1][−π/2, π/2]
cosine[0, π]cos⁻¹[−1, 1][0, π]
tangent(−π/2, π/2)tan⁻¹ℝ(−π/2, π/2)
cosecant[−π/2, π/2] \ {0}cosec⁻¹ℝ \ (−1, 1)[−π/2, π/2] \ {0}
secant[0, π] \ {π/2}sec⁻¹ℝ \ (−1, 1)[0, π] \ {π/2}
cotangent(0, π)cot⁻¹ℝ(0, π)

Which range does the answer live in?

  • Range around zero Negative inputs give negative angles.
    • sin⁻¹: [−π/2, π/2]
    • tan⁻¹: (−π/2, π/2)
    • cosec⁻¹: [−π/2, π/2] without 0
  • Range from 0 to π Negative inputs give obtuse angles.
    • cos⁻¹: [0, π]
    • sec⁻¹: [0, π] without π/2
    • cot⁻¹: (0, π)

Worked example 1: four principal values

(i) tan⁻¹(−√3): tan(π/3) = √3 and tan is odd, so tan(−π/3) = −√3; −π/3 is in (−π/2, π/2). Answer −π/3. (ii) cosec⁻¹(−2): sin(π/6) = 1/2, so cosec(π/6) = 2 and cosec(−π/6) = −2; −π/6 is in [−π/2, π/2] \ {0}. Answer −π/6. (iii) sec⁻¹(−√2): sec y = −√2 means cos y = −1/√2; in [0, π] this is y = 3π/4. Answer 3π/4. (iv) cot⁻¹(−1/√3): cot(2π/3) = cos(2π/3)/sin(2π/3) = (−1/2)/(√3/2) = −1/√3, and 2π/3 is in (0, π). Answer 2π/3.

Worked example 2: a combination

Find tan⁻¹(√3) − sec⁻¹(−2). Working: tan⁻¹(√3) = π/3. For sec⁻¹(−2) we need cos y = −1/2 with y in [0, π], so y = 2π/3. The value is π/3 − 2π/3 = −π/3.

Worked example 3: when does a value exist?

(i) Does sec⁻¹(1/2) exist? No: the domain of sec⁻¹ is ℝ \ (−1, 1) and 1/2 lies in (−1, 1). Indeed sec y = 1/2 would need cos y = 2, which is impossible. (ii) tan⁻¹(tan(3π/4)): 3π/4 is not in (−π/2, π/2). Since tangent has period π, tan(3π/4) = tan(3π/4 − π) = tan(−π/4), and −π/4 lies in (−π/2, π/2). So the value is −π/4, not 3π/4.

Worked example 4: period of a tangent graph

For y = 2 tan 3x: the period is π/3, one cycle runs over −π/6 < x < π/6, and the asymptotes are x = π/6 + kπ/3, k ∈ Z. Check with k = 0 and k = −1: x = π/6 and x = −π/6, the two ends of the central cycle.

tan⁻¹ : ℝ → (−π/2, π/2); cosec⁻¹ : ℝ \ (−1, 1) → [−π/2, π/2] \ {0}; sec⁻¹ : ℝ \ (−1, 1) → [0, π] \ {π/2}; cot⁻¹ : ℝ → (0, π).

— The four remaining ranges

Key takeaways: tan x has period π, vertical asymptotes at odd multiples of π/2 and no amplitude. tan⁻¹ and cot⁻¹ accept every real number; cosec⁻¹ and sec⁻¹ accept only |x| ≥ 1. A principal value must lie in the range in the table; if the obvious angle does not, use periodicity or symmetry to move to one that does.

Check your understanding

  1. 1. What is the principal value of cot⁻¹(−1)?

    1. −π/4
    2. 3π/4
    3. π/4
    4. 5π/4
    Show answer

    Answer: B. The range of cot⁻¹ is (0, π). cot(3π/4) = cos(3π/4)/sin(3π/4) = (−1/√2)/(1/√2) = −1, and 3π/4 is in (0, π). −π/4 is outside the range, and 5π/4 is too.

  2. 2. Which is the range of the principal value branch of sec⁻¹ x?

    1. [−π/2, π/2] \ {0}
    2. (0, π)
    3. [−1, 1]
    4. [0, π] \ {π/2}
    Show answer

    Answer: D. Secant is restricted to [0, π] without π/2 (where it is undefined), so sec⁻¹ takes values in [0, π] \ {π/2}. [−π/2, π/2] \ {0} is the range of cosec⁻¹ and (0, π) is that of cot⁻¹.

  3. 3. What can be said about sec⁻¹(1/2)?

    1. It is not defined, since 1/2 lies in (−1, 1)
    2. It equals π/3
    3. It equals 2π/3
    4. It equals π/6
    Show answer

    Answer: A. sec⁻¹ is defined only for |x| ≥ 1. sec y = 1/2 would need cos y = 2, which is impossible. (π/3 is sec⁻¹ 2, not sec⁻¹(1/2).)

  4. 4. Simplify tan⁻¹(tan(5π/6)).

    1. 5π/6
    2. π/6
    3. −π/6
    4. −5π/6
    Show answer

    Answer: C. 5π/6 is not in (−π/2, π/2). Tangent has period π, so tan(5π/6) = tan(5π/6 − π) = tan(−π/6), and −π/6 is in (−π/2, π/2). The value is −π/6.

  5. 5. What is the period of y = 4 tan 3x?

    1. 2π/3
    2. π/3
    3. 3π
    4. 4π/3
    Show answer

    Answer: B. y = a tan bx has period π/|b|. Here b = 3, so the period is π/3. The coefficient 4 stretches the graph vertically but does not change the period.

Privacy · Terms · Refunds · Delivery