• Practice
  • About 24 min
  • 5 practice questions

Derivative as slope and rate: motion, related rates, tangents and normals

Read a derivative as the slope of a curve and as a rate of change, solve straight-line motion and related rates problems, write tangents and normals, and find the angle between two curves.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain the derivative as the slope of a curve and as an instantaneous rate of change.
  • Find velocity, acceleration, rest points, turning points and total distance for a particle moving on a line.
  • Solve related rates problems by differentiating a relation with respect to time.
  • Write the equations of the tangent and the normal to a curve, including a curve given in parametric form.
  • Find the angle between two intersecting curves and test whether they cut orthogonally.

Chapter 7 of the Tamil Nadu textbook (Mathematics Volume II) is about using the derivative you learnt in Class 11. This first lesson covers Section 7.2: what the number f′(x) means geometrically and physically, and how it gives tangents, normals and angles between curves. Every later section of the chapter rests on these two meanings.

The derivative as slope

For a non-vertical straight line, the ratio of the rise to the run is the same wherever you measure it; this constant is the slope m. The line rises when m > 0, falls when m < 0 and is flat when m = 0. A curve y = f(x) has no single slope, so we take two points (x, f(x)) and (x + h, f(x + h)). The slope of the chord joining them is the Newton quotient [f(x + h) − f(x)] / h. Letting h → 0 gives the slope of the curve at (x, f(x)):

f′(x) = lim (h → 0) [f(x + h) − f(x)] / h = tan θ, where θ is the angle the tangent makes with the positive x-axis, measured anticlockwise.

— Slope of a curve

The Newton quotient over an interval [a, b] is the average rate of change [f(b) − f(a)] / (b − a); the limit f′(x) is the instantaneous rate of change. For example, for f(x) = x³ on [1, 2] the average rate is (8 − 1)/(2 − 1) = 7, while the instantaneous rate f′(x) = 3x² is 3 at x = 1 and 12 at x = 2. The average lies between the two end rates here, which is no accident, as Lesson 2 will show.

The derivative as rate of change: motion on a line

If s = f(t) is the position of a particle on a line at time t (its position function), then the velocity is v(t) = ds/dt and the acceleration is a(t) = dv/dt = d²s/dt². Speed is |v(t)|. The particle is at rest when v = 0, moves forward when v > 0, moves backward when v < 0, and changes direction exactly where v changes sign. If it turns at time t_c between t₁ and t₂, the total distance travelled is |s(t_c) − s(t₁)| + |s(t₂) − s(t_c)|, not simply |s(t₂) − s(t₁)|.

For free fall near the Earth's surface with no air resistance, the acceleration is constant: a = −g, so v = −gt + v₀ and s = −½gt² + v₀t + s₀, where v₀ and s₀ are the initial velocity and height and g = 9.8 m/s² (or 32 ft/s²).

Worked example 1: rest, direction and total distance

A particle moves so that s(t) = t³ − 9t² + 24t metres, t ≥ 0 in seconds. Working: v(t) = 3t² − 18t + 24 = 3(t² − 6t + 8) = 3(t − 2)(t − 4). So the particle is at rest at t = 2 s and t = 4 s. For 0 ≤ t < 2 both factors are negative, so v > 0; for 2 < t < 4, v < 0; for t > 4, v > 0. Hence it changes direction at t = 2 and t = 4. The acceleration a(t) = 6t − 18 is zero at t = 3 s. Distance in the first 3 seconds: s(0) = 0, s(2) = 8 − 36 + 48 = 20, s(3) = 27 − 81 + 72 = 18. Total distance = |20 − 0| + |18 − 20| = 22 m, although the displacement is only 18 m.

Worked example 2: a ball thrown upwards

A ball thrown straight up from the ground is at height s(t) = 96t − 16t² feet after t seconds. Working: v(t) = 96 − 32t. At the highest point v = 0, so t = 3 s and the greatest height is s(3) = 288 − 144 = 144 ft. It lands when s = 0: 16t(6 − t) = 0, so t = 6 s, and then v(6) = 96 − 192 = −96 ft/s (the minus sign means downward).

Related rates

A related rates problem has two or more quantities changing with time and linked by an equation. You know some of the rates and want another. The method is always the same, as the diagram shows.

Solving a related rates problem

  1. Name the variables Draw a figure; mark what changes with time.
  2. Write the relation A formula linking them, e.g. volume, Pythagoras.
  3. Differentiate with respect to t Use the chain rule on every changing quantity.
  4. Substitute the instant's values Only after differentiating.
  5. Solve and state units A negative rate means decreasing.

Worked example 3: a melting snowball

A spherical snowball melts so that its volume decreases at 16π cm³/min. How fast are the radius and the surface area changing when r = 2 cm? Working: V = (4/3)πr³, so dV/dt = 4πr² · dr/dt. With dV/dt = −16π and r = 2: −16π = 4π(4) · dr/dt, so dr/dt = −1 cm/min. The surface area is S = 4πr², so dS/dt = 8πr · dr/dt = 8π(2)(−1) = −16π cm²/min. Both are decreasing.

Worked example 4: a sliding ladder

A 10 m ladder leans against a wall; its foot is pulled away at 2 m/s. How fast does the top slide down when the foot is 6 m from the wall? Working: with foot distance x and top height y, x² + y² = 100. When x = 6, y = √(100 − 36) = 8. Differentiating, 2x · dx/dt + 2y · dy/dt = 0, so dy/dt = −(x/y) · dx/dt = −(6/8)(2) = −1.5 m/s: the top moves down at 1.5 m/s.

Equations of the tangent and the normal

The tangent to a curve at a point is the straight line that just touches the curve there; the normal is the line through the same point perpendicular to the tangent. At the point (a, b) of y = f(x), with slope m = f′(a):

LineEquation at (a, b)Special cases
Tangenty − b = f′(a)(x − a)f′(a) = 0: tangent y = b, normal x = a
Normaly − b = −[1/f′(a)](x − a), or (y − b) f′(a) = −(x − a)f′(a) infinite: tangent x = a, normal y = b

Worked example 5: tangent and normal to a cubic

Find the tangent and normal to y = x³ − 2x + 1 at (1, 0). Working: dy/dx = 3x² − 2, which is 1 at x = 1. Tangent: y − 0 = 1(x − 1), that is x − y − 1 = 0. The normal has slope −1: y − 0 = −1(x − 1), that is x + y − 1 = 0. Check: (1, 0) satisfies both.

Worked example 6: a parametric curve and a parallel tangent

(i) For x = 3 cos t, y = 2 sin t (an ellipse), find the tangent at t = π/4. Working: dy/dx = (dy/dt)/(dx/dt) = (2 cos t)/(−3 sin t) = −(2/3) cot t = −2/3 at t = π/4. The point is (3/√2, √2). Tangent: y − √2 = −(2/3)(x − 3/√2); multiplying by 3, 3y − 3√2 = −2x + 6/√2 = −2x + 3√2, so 2x + 3y − 6√2 = 0. (ii) Where is the tangent to y = x² − 4x + 5 parallel to y = 2x + 1? We need dy/dx = 2x − 4 = 2, so x = 3 and y = 9 − 12 + 5 = 2: the point is (3, 2).

Angle between two curves

The angle between two intersecting curves is the acute angle between their tangents at the point of intersection. If the tangent slopes there are m₁ and m₂ (both finite), then the formula below gives it. The curves touch (are parallel there) when m₁ = m₂, and cut orthogonally (at right angles) when m₁m₂ = −1.

tan θ = | (m₁ − m₂) / (1 + m₁m₂) |. Orthogonal curves: m₁m₂ = −1.

— Angle between two curves

Worked example 7: angle and orthogonality

(i) Find the angle between y = x² and y = 2 − x² at (1, 1). Working: x² = 2 − x² gives x = ±1, so (1, 1) is a common point. Slopes there: m₁ = 2x = 2 and m₂ = −2x = −2. tan θ = |(2 − (−2))/(1 + (2)(−2))| = |4/(−3)| = 4/3, so θ = tan⁻¹(4/3). (ii) Show that xy = 6 and x² − y² = 5 cut orthogonally. Working: substituting y = 6/x gives x⁴ − 5x² − 36 = 0, so x² = 9 and one common point is (3, 2). Differentiating, xy = 6 gives dy/dx = −y/x = −2/3, and x² − y² = 5 gives dy/dx = x/y = 3/2. The product is (−2/3)(3/2) = −1, so the curves cut at right angles. (The same working at (−3, −2) gives the same product.)

Key takeaways: f′(x) is both the slope tan θ of the tangent and the instantaneous rate of change; v = ds/dt, a = d²s/dt², and total distance must be split at turning points; in related rates, differentiate first and substitute second; tangent y − b = f′(a)(x − a), normal slope −1/f′(a); the angle between curves comes from tan θ = |(m₁ − m₂)/(1 + m₁m₂)|.

Check your understanding

  1. 1. For f(x) = x² the average rate of change on [1, 3] is

    1. 2
    2. 4
    3. 6
    4. 8
    Show answer

    Answer: B. Average rate = [f(3) − f(1)]/(3 − 1) = (9 − 1)/2 = 4. (The instantaneous rates at the ends are 2 and 6.)

  2. 2. A particle has s(t) = t² − 6t + 5 metres, t ≥ 0. At what time is it momentarily at rest?

    1. t = 1 s
    2. t = 5 s
    3. t = 6 s
    4. t = 3 s
    Show answer

    Answer: D. v = ds/dt = 2t − 6, which is zero at t = 3 s. The values t = 1 and t = 5 are when s = 0, not when v = 0.

  3. 3. The radius of a circle grows at 0.5 cm/s. How fast is its area growing when r = 10 cm?

    1. 10π cm²/s
    2. 5π cm²/s
    3. 20π cm²/s
    4. 100π cm²/s
    Show answer

    Answer: A. A = πr², so dA/dt = 2πr · dr/dt = 2π(10)(0.5) = 10π cm²/s.

  4. 4. The slope of the normal to y = x³ at x = 1 is

    1. 3
    2. −3
    3. −1/3
    4. 1/3
    Show answer

    Answer: C. The tangent slope is dy/dx = 3x² = 3 at x = 1. The normal slope is the negative reciprocal, −1/3.

  5. 5. Two curves meet at a point where their tangent slopes are 1/2 and −2. The curves

    1. touch each other there
    2. cut at 45°
    3. cut at 60°
    4. cut orthogonally
    Show answer

    Answer: D. m₁m₂ = (1/2)(−2) = −1, so the tangents are perpendicular and the curves cut orthogonally.

Privacy · Terms · Refunds · Delivery