Revision notes

Chapter 7 Applications of Differential Calculus: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Derivative as slope and rate: motion, related rates, tangents and normals

f′(x) = lim (h → 0) [f(x + h) − f(x)] / h = tan θ, where θ is the angle the tangent makes with the positive x-axis, measured anticlockwise.

— Slope of a curve

Solving a related rates problem

  1. Name the variables Draw a figure; mark what changes with time.
  2. Write the relation A formula linking them, e.g. volume, Pythagoras.
  3. Differentiate with respect to t Use the chain rule on every changing quantity.
  4. Substitute the instant's values Only after differentiating.
  5. Solve and state units A negative rate means decreasing.
LineEquation at (a, b)Special cases
Tangenty − b = f′(a)(x − a)f′(a) = 0: tangent y = b, normal x = a
Normaly − b = −[1/f′(a)](x − a), or (y − b) f′(a) = −(x − a)f′(a) infinite: tangent x = a, normal y = b

tan θ = | (m₁ − m₂) / (1 + m₁m₂) |. Orthogonal curves: m₁m₂ = −1.

— Angle between two curves

Key takeaways: f′(x) is both the slope tan θ of the tangent and the instantaneous rate of change; v = ds/dt, a = d²s/dt², and total distance must be split at turning points; in related rates, differentiate first and substitute second; tangent y − b = f′(a)(x − a), normal slope −1/f′(a); the angle between curves comes from tan θ = |(m₁ − m₂)/(1 + m₁m₂)|.

Read the full lesson

Lesson 2

Rolle's theorem, Lagrange's mean value theorem and series expansions

f′(c) = [f(b) − f(a)] / (b − a) for some c in (a, b).

— Lagrange's mean value theorem

The two mean value theorems

  • Rolle's theorem
    • Continuous on [a, b]
    • Differentiable on (a, b)
    • Needs f(a) = f(b)
    • Conclusion: f′(c) = 0
    • Tangent parallel to the x-axis
  • Lagrange's theorem
    • Continuous on [a, b]
    • Differentiable on (a, b)
    • No condition on f(a), f(b)
    • Conclusion: f′(c) = [f(b) − f(a)]/(b − a)
    • Tangent parallel to the chord

Taylor: f(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + ... + f⁽ⁿ⁾(a)(x − a)ⁿ/n! + ... Maclaurin (a = 0): f(x) = f(0) + f′(0)x + f″(0)x²/2! + ...

— Series expansions
Standard Maclaurin series worth knowing
FunctionSeriesValid for
eˣ1 + x + x²/2! + x³/3! + ...all x
sin xx − x³/3! + x⁵/5! − ...all x
cos x1 − x²/2! + x⁴/4! − ...all x
log(1 + x)x − x²/2 + x³/3 − x⁴/4 + ...−1 < x ≤ 1
tan xx + x³/3 + 2x⁵/15 + ...−π/2 < x < π/2

Key takeaways: check all the conditions before quoting a theorem; Rolle gives f′(c) = 0, Lagrange gives f′(c) = [f(b) − f(a)]/(b − a), and c must lie strictly inside the interval; Rolle plus the intermediate value theorem counts roots; the coefficient of (x − a)ⁿ in a Taylor series is f⁽ⁿ⁾(a)/n!.

Read the full lesson

Lesson 3

Indeterminate forms and l'Hôpital's rule

If f and g are differentiable near a, g′(x) ≠ 0 there, and f(x)/g(x) has the form 0/0 or ∞/∞ as x → a, then lim f(x)/g(x) = lim f′(x)/g′(x), provided the right-hand limit exists (or is ±∞).

— l'Hôpital's rule

Limits of the form 0⁰, 1^∞, ∞⁰

  1. Let A = lim F(x) F(x) = g(x)^h(x), with A > 0 assumed.
  2. Take logarithms log F(x) = h(x) · log g(x).
  3. Find lim log F(x) Rewrite as 0/0 or ∞/∞; use l'Hôpital. Call the result α.
  4. Exponentiate A = e^α.
Which rewrite for which form
FormRewriteThen
0/0, ∞/∞none neededl'Hôpital directly
0 × ∞f/(1/g) or g/(1/f)0/0 or ∞/∞
∞ − ∞one combined fraction0/0 or ∞/∞
0⁰, 1^∞, ∞⁰take log: h · log g0 × ∞, then as above; answer e^α

Key takeaways: substitute first to identify the form; apply l'Hôpital's rule only to 0/0 or ∞/∞, differentiating numerator and denominator separately; reduce 0 × ∞ and ∞ − ∞ to a fraction; for the exponent forms find the limit of the logarithm and exponentiate.

Read the full lesson

Lesson 4

Monotonicity, extrema and concavity: first and second derivative tests

Sign of f′(x) on (a, b)Behaviour of f
f′(x) ≥ 0increasing
f′(x) > 0strictly increasing
f′(x) ≤ 0decreasing
f′(x) < 0strictly decreasing

First derivative test at a critical number c (moving left to right)

  • f′ changes from + to − Local maximum f(c).
  • f′ changes from − to + Local minimum f(c).
  • No sign change Neither a maximum nor a minimum.

If f′(c) = 0 and f″(c) exists: f″(c) < 0 gives a local maximum, f″(c) > 0 gives a local minimum, and f″(c) = 0 gives no information (go back to the first derivative test).

— Second derivative test

Key takeaways: the sign of f′ gives monotonicity and the sign of f″ gives concavity; critical numbers include points where f′ does not exist; on a closed interval compare the values at critical numbers and end points; first derivative test: + to − is a maximum, − to + a minimum; second derivative test: f″ < 0 maximum, f″ > 0 minimum, f″ = 0 inconclusive; an inflection point needs a change of concavity, not just f″ = 0.

Read the full lesson

Lesson 5

Optimisation, symmetry, asymptotes and sketching curves

Procedure for an optimisation problem

  1. Draw and label A figure with the quantities named.
  2. Write the target The quantity to be maximised or minimised.
  3. Use the condition Eliminate variables until one remains.
  4. Fix the interval Allowed values of that variable.
  5. Extremise Closed interval method, first or second derivative test.
Symmetric aboutTest: the equation is unchanged whenExample
the y-axisx is replaced by −xy = x²
the x-axisy is replaced by −yx = y²
the originx by −x and y by −y together (a 180° rotation)y = x³

What to find before you sketch y = f(x)

  • Where the curve lives
    • Domain and range
    • Intercepts with the axes
    • Symmetry
  • From f′
    • Critical points
    • Intervals of increase and decrease
    • Local extrema
  • From f″
    • Intervals of concavity
    • Points of inflection
  • At the edges
    • Horizontal, vertical and slant asymptotes

Key takeaways: in optimisation, reduce to one variable on a definite interval and confirm a maximum or minimum with a test; minimise the squared distance instead of the distance; a curve is symmetric about the y-axis if replacing x by −x leaves it unchanged; vertical asymptotes come from zeros of the denominator, horizontal ones from limits at ±∞, slant ones from division; a sketch combines all of these.

Read the full lesson

Privacy · Terms · Refunds · Delivery