- Practice
- About 18 min
- 5 practice questions
Using the trigonometric table
Read sine, cosine and tangent values from the trigonometric table with the mean-difference columns, find an angle from a given value, and solve right-triangle problems.
If something looks wrong, please tell us.
We know exact values only for 0°, 30°, 45°, 60° and 90°. For any other acute angle, such as 32°15′, we use a trigonometric table (printed at the end of the chapter in the Tamil Nadu textbook). It gives sine, cosine and tangent values correct to four decimal places.
Degrees, minutes and seconds
One degree is divided into 60 minutes and one minute into 60 seconds: 1° = 60′ and 1′ = 60″. So 6′ = 0.1°, 30′ = 0.5° and 48′ = 0.8°.
How the table is laid out
- The column on the far left lists the whole degrees from 0° to 89°.
- Ten columns follow, headed 0′, 6′, 12′, 18′, 24′, 30′, 36′, 42′, 48′ and 54′ (that is 0.0°, 0.1°, … 0.9°).
- The last five columns are the mean difference columns, headed 1, 2, 3, 4 and 5 (minutes). They give the small change for the extra 1′ to 5′, in units of the fourth decimal place.
- For sine and tangent the mean difference is added (these ratios grow as the angle grows). For cosine it is subtracted (cosine falls as the angle grows).
Reading a value from the table
- Split the minutes Write the angle as (nearest lower multiple of 6′) + (1′ to 5′), e.g. 32°15′ = 32°12′ + 3′.
- Read the main value Row of the degrees, column of the multiple of 6′.
- Read the mean difference Same row, column of the extra minutes.
- Add or subtract Add for sin and tan; subtract for cos. The difference is in the 4th decimal place.
The values used below are the standard four-decimal values that appear in such tables. You can check each one with a scientific calculator set to degrees.
Worked example 1: sine
Find sin 32°15′. Working: 32°15′ = 32°12′ + 3′. In the sine table, row 32°, column 12′ gives 0.5329. In the same row the mean difference for 3′ is 7, that is 0.0007. Sine increases, so add: sin 32°15′ = 0.5329 + 0.0007 = 0.5336.
Worked example 2: cosine
Find cos 50°40′. Working: 50°40′ = 50°36′ + 4′. In the cosine table, row 50°, column 36′ gives 0.6347. The mean difference for 4′ is 9, that is 0.0009. Cosine decreases, so subtract: cos 50°40′ = 0.6347 − 0.0009 = 0.6338.
Worked example 3: tangent
Find tan 25°20′. Working: 25°20′ = 25°18′ + 2′. In the tangent table, row 25°, column 18′ gives 0.4727. The mean difference for 2′ is 7. Add: tan 25°20′ = 0.4727 + 0.0007 = 0.4734.
Finding the angle from a value
Find θ if sin θ = 0.6000. Working: in the sine table look for the nearest value below 0.6000. Row 36° gives 0.5990 under 48′ (the next entry, 0.6004 under 54′, is too big). The gap is 0.6000 − 0.5990 = 0.0010, that is 10 units. In row 36° the mean differences are 2, 5, 7, 9, 12 for 1′ to 5′; the nearest to 10 is 9, for 4′. So θ = 36°48′ + 4′ = 36°52′. In the same way, tan θ = 0.5000 gives row 26°, 30′ (0.4986), a gap of 14 units, nearest mean difference 15 for 4′, so θ = 26°34′. For cosine, remember that a smaller value means a larger angle, so the minutes from the mean difference are added to the angle of the table entry just above the value.
sin and tan: add the mean difference. cos: subtract it. Always split the minutes as (multiple of 6′) + (1′ to 5′).
Worked example 4: a ladder
A 6 m ladder leans against a wall and makes an angle of 62° with the ground. How high up the wall does it reach? Working: the ladder is the hypotenuse and the height is the side opposite 62°. sin 62° = height/6, so height = 6 × sin 62° = 6 × 0.8829 = 5.2974 ≈ 5.30 m.
Worked example 5: area of a right triangle
A right triangle has hypotenuse 8 cm and one acute angle of 40°. Find its area. Working: side opposite 40° = 8 × sin 40° = 8 × 0.6428 = 5.1424 cm. Side adjacent to 40° = 8 × cos 40° = 8 × 0.7660 = 6.1280 cm. These two sides are the legs, so area = ½ × 5.1424 × 6.1280 ≈ 15.76 cm².
Key takeaways: 1° = 60′; the table gives values at every 6′ and the mean difference columns fill in 1′ to 5′; add the mean difference for sin and tan, subtract it for cos; to find an angle, work backwards from the nearest entry; then use the values in right-triangle problems.
Check your understanding
-
1. How many minutes are there in 2.5°?
- 25′
- 150′
- 250′
- 125′
Show answer
Answer: B. 1° = 60′, so 2.5° = 2.5 × 60′ = 150′.
-
2. In the sine table, row 20° under 0′ reads 0.3420 and the mean difference for 3′ is 8. What is sin 20°3′?
- 0.3412
- 0.3423
- 0.3428
- 0.4220
Show answer
Answer: C. Sine increases with the angle, so add the mean difference: 0.3420 + 0.0008 = 0.3428. Subtracting (0.3412) is the rule for cosine, and 0.3423 adds the minutes instead of the mean difference.
-
3. In the cosine table, row 70° under 6′ reads 0.3404 and the mean difference for 4′ is 11. What is cos 70°10′?
- 0.3393
- 0.3415
- 0.3408
- 0.3400
Show answer
Answer: A. 70°10′ = 70°6′ + 4′. Cosine decreases as the angle grows, so subtract: 0.3404 − 0.0011 = 0.3393.
-
4. From a point 40 m from the foot of a tree, the angle of elevation of its top is 35°. Given tan 35° = 0.7002, how tall is the tree?
- 57.13 m
- 22.94 m
- 32.77 m
- 28.01 m
Show answer
Answer: D. tan 35° = height/40, so height = 40 × 0.7002 = 28.008 ≈ 28.01 m. Dividing 40 by 0.7002 (about 57.13) uses the ratio upside down.
-
5. In the sine table, row 48° reads 0.7490 under 30′ and 0.7501 under 36′, and the mean differences in that row are 2, 4, 6, 8, 10 for 1′ to 5′. If sin θ = 0.7500, what is θ?
- 48°30′
- 48°35′
- 48°36′
- 48°25′
Show answer
Answer: B. The nearest entry below 0.7500 is 0.7490 at 48°30′. The gap is 0.7500 − 0.7490 = 0.0010 = 10 units, which is the mean difference for 5′. So θ = 48°30′ + 5′ = 48°35′.
Sign in to keep track of the lessons you finish.