- Practice
- About 15 min
- 5 practice questions
Collecting data and making a frequency table
Tell primary data from secondary data, organise raw data into class intervals with tally marks, read a frequency table, and know the three averages: mean, median and mode.
If something looks wrong, please tell us.
By the end of this lesson you can
- Say whether data are primary or secondary.
- Group raw data into class intervals using tally marks.
- Read lower and upper class limits and frequencies from a frequency table.
Statistics is the science of collecting, organising, analysing and interpreting data so that we can make decisions. Data are the facts, mostly numbers, that we gather for a purpose: marks in a test, the heights of players, the rainfall in a month. A long list of numbers says little by itself; this chapter shows how to organise it and then sum it up with one typical value.
Primary and secondary data
Two sources of data
-
Primary data
- Collected first-hand by you
- By interviews, surveys, experiments
- Example: you measure the heights of your classmates
-
Secondary data
- Collected earlier by someone else
- From published reports and records
- Example: figures you take from a government report
Data as first collected, before being sorted or processed, are called raw data. Raw data are hard to read: finding the five highest marks in a jumbled list of 50, or counting how many are below 40, takes time.
Grouping data into classes
Here are the marks (out of 60) of 30 students in a class test. These marks are made up for practice: 34, 47, 52, 28, 41, 59, 45, 38, 50, 43, 36, 55, 48, 42, 31, 46, 53, 39, 44, 49, 57, 40, 35, 51, 46, 29, 44, 58, 37, 47. The lowest mark is 28 and the highest is 59, so classes of width 5 from 26-30 up to 56-60 cover all of them. In the class 41-45, 41 is the lower limit and 45 is the upper limit.
Go through the list once. For each mark, put a tally mark (a short stroke |) against its class. To keep counting easy, every fifth stroke is drawn across the four before it, making a bundle of five. So 7 is written as one crossed bundle of five followed by two strokes. The number of tallies in a class is its frequency, and the finished table is a frequency table.
| Class interval | Tally marks | Frequency |
|---|---|---|
| 26-30 | || | 2 |
| 31-35 | ||| | 3 |
| 36-40 | one bundle of five | 5 |
| 41-45 | one bundle of five, then | | 6 |
| 46-50 | one bundle of five, then || | 7 |
| 51-55 | |||| | 4 |
| 56-60 | ||| | 3 |
| Total | 30 |
Worked example 1: reading the table
How many students scored 46 or more? Working: add the frequencies of 46-50, 51-55 and 56-60: 7 + 4 + 3 = 14. How many scored 40 or less? 2 + 3 + 5 = 10. Check the total: 2 + 3 + 5 + 6 + 7 + 4 + 3 = 30, the number of students. A total that does not match means a mark was missed or counted twice.
Worked example 2: tallying a small set
Make a frequency table, with classes 1-5, 6-10 and 11-15, for these made-up numbers of books read in a year by 12 children: 3, 7, 12, 5, 9, 14, 2, 8, 6, 11, 4, 10. Working: 1-5 gets 3, 5, 2, 4 (frequency 4); 6-10 gets 7, 9, 8, 6, 10 (frequency 5); 11-15 gets 12, 14, 11 (frequency 3). Total 4 + 5 + 3 = 12.
From raw data to a frequency table
- Find the lowest and highest This gives the range of the data.
- Choose classes Equal width, covering every value, with no overlap.
- Tally One stroke per value; every fifth stroke crosses the four before it.
- Count and check Frequencies must add up to the number of values.
One number to describe the data
We often want a single value that is typical of the data, called an average or a measure of central tendency. Saying that a group studies 'on average 2 hours a day' does not mean each person studies exactly 2 hours; it gives the centre around which the values vary. There are three such averages: the mean, the median and the mode. The next four lessons show how to find each one, and when each is the most suitable.
Key takeaways: primary data are collected first-hand, secondary data come from others; raw data are unorganised; class intervals have lower and upper limits; tally marks are bundled in fives; the frequencies in a frequency table add up to the total number of values.
Check your understanding
-
1. A student asks 40 classmates how they travel to school. What kind of data is this?
- Secondary data
- Primary data
- Grouped data only
- Not data at all
Show answer
Answer: B. The student collects the information first-hand from the classmates, so it is primary data. Data copied from a published record would be secondary.
-
2. In the class interval 21-30, what is the upper limit?
- 21
- 25.5
- 30
- 9
Show answer
Answer: C. In a class interval the first number is the lower limit and the second is the upper limit, so the upper limit is 30. 25.5 is the mid-value.
-
3. How are 8 values shown using tally marks?
- Eight separate strokes in a row
- One bundle of five and three strokes
- Two bundles of four
- One bundle of five and eight strokes
Show answer
Answer: B. Every fifth stroke is drawn across the four before it, making a bundle of 5. So 8 = one bundle of five + three strokes.
-
4. In the frequency table of this lesson, how many students scored from 36 to 50 marks?
- 18
- 13
- 12
- 11
Show answer
Answer: A. Add the frequencies of 36-40, 41-45 and 46-50: 5 + 6 + 7 = 18.
-
5. The frequencies of a table are 4, 9, 12, 7 and 3. How many values are there in all?
- 32
- 12
- 5
- 35
Show answer
Answer: D. The total number of values is the sum of the frequencies: 4 + 9 + 12 + 7 + 3 = 35. 5 is only the number of classes.
Sign in to keep track of the lessons you finish.