- Practice
- About 16 min
- 5 practice questions
Solutions, colloids, suspensions and emulsions
Define solute, solvent and solution, compare true solutions, colloids and suspensions by particle size and properties, explain Brownian movement and the Tyndall effect, and classify colloids and emulsions.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define a solution, a solute and a solvent.
- Compare true solutions, colloids and suspensions by particle size and properties.
- Explain Brownian movement and the Tyndall effect.
- Name the eight types of colloids and the two types of emulsions.
Stir a spoon of sugar into one glass of water, a spoon of starch into a second and a spoon of wheat flour into a third, and leave them for ten minutes. The sugar water stays perfectly clear; the starch water is cloudy but nothing settles; the flour water is murky and the flour slowly sinks. The three results come from one cause: the size of the particles.
Solutions
A solution is a homogeneous mixture of two or more substances. The component present in the smaller amount by weight is the solute; the one present in the larger amount is the solvent: solute + solvent → solution. In salt water, salt is the solute and water the solvent.
True solutions, colloids and suspensions
| Property | True solution | Colloid | Suspension |
|---|---|---|---|
| Particle size | Less than 1 nm | 1 nm to 100 nm | More than 100 nm |
| Appearance | Transparent | Translucent | Opaque |
| Separated by filter paper? | No | No | Yes |
| Do particles settle? | Never | Only on centrifuging | Yes, on standing |
| Scatters a beam of light? | No | Yes | Light does not pass through |
| Brownian movement | Not seen | Seen | May be seen |
| Nature | Homogeneous | Heterogeneous | Heterogeneous |
| Example | Sugar in water | Starch in water | Wheat flour in water |
Worked example 1: classifying by particle size
Question: Particle sizes in three liquids are (a) 0.5 nm, (b) 50 nm, (c) 2000 nm. Name each type and say which will settle on standing. Working: (a) less than 1 nm - true solution. (b) between 1 and 100 nm - colloid. (c) more than 100 nm - suspension, which settles on standing and can be filtered.
Brownian movement and the Tyndall effect
Under a powerful microscope, colloidal particles are seen moving constantly and rapidly in a zig-zag path. This Brownian movement happens because the much smaller molecules of the medium strike each particle unevenly from different sides.
When a strong beam of light passes through a colloid, the colloidal particles scatter the light and the beam's path becomes visible. This is the Tyndall effect (observed by John Tyndall in 1869), and the lit path is the Tyndall cone. A true solution shows no such path, because its particles are too small. You see the same effect when sunlight streams through a gap into a dusty room, or when car headlights cut a beam through mist. The blue colour of the sky also comes from the scattering of sunlight by tiny particles in the air.
Colloids: dispersed phase and dispersion medium
A colloid has two parts: the dispersed phase (the particles, like a solute) and the dispersion medium (in which they are spread, like a solvent). Each can be a solid, liquid or gas, which gives eight kinds of colloids. A gas in a gas is not one of them, because gases always mix completely to form a true solution.
| Dispersed phase | Dispersion medium | Name | Examples |
|---|---|---|---|
| Solid | Solid | Solid sol | Coloured glass, gems |
| Solid | Liquid | Sol | Paints, inks |
| Solid | Gas | Aerosol | Smoke, dust |
| Liquid | Solid | Gel | Curd, cheese, jelly |
| Liquid | Liquid | Emulsion | Milk, oil in water |
| Liquid | Gas | Aerosol | Mist, fog, clouds |
| Gas | Solid | Solid foam | Cake, bread |
| Gas | Liquid | Foam | Soap lather, aerated drinks |
Emulsions
An emulsion is a colloid in which one liquid is dispersed in another liquid that it normally does not mix with. The word comes from a Latin word meaning 'to milk'; milk is fat dispersed in water. Turning two liquids into an emulsion is emulsification. There are two types: oil-in-water (O/W), where oil droplets are spread through water, as in milk and cream; and water-in-oil (W/O), where water droplets are spread through oil, as in butter. Emulsions are used widely in foods, medicines (cough syrups), cosmetics (face creams), paints and pesticides.
Two types of emulsions
-
Oil in water (O/W)
- Oil droplets in water
- Water is the medium
- Milk, cream
-
Water in oil (W/O)
- Water droplets in oil
- Oil is the medium
- Butter
Worked example 2: naming a colloid
Question: In fog, what are the dispersed phase and the dispersion medium, and what type of colloid is it? Working: tiny water droplets (liquid) are spread through air (gas). Liquid in gas is an aerosol. Smoke is also an aerosol, but its dispersed phase is solid.
Particle size decides the type: below 1 nm = true solution; 1-100 nm = colloid (Tyndall effect, Brownian movement); above 100 nm = suspension (settles, can be filtered).
Key takeaways: a solution is a homogeneous mixture of solute and solvent. True solutions, colloids and suspensions differ in particle size, and so in appearance, settling, filtering and scattering of light. Colloids show Brownian movement and the Tyndall effect. There are eight kinds of colloids; an emulsion is liquid in liquid, either O/W (milk) or W/O (butter).
Check your understanding
-
1. Particles in a mixture are about 40 nm across. The mixture is a
- true solution
- suspension
- colloid
- pure substance
Show answer
Answer: C. Particles between 1 nm and 100 nm make a colloid. Below 1 nm would be a true solution and above 100 nm a suspension.
-
2. A torch beam is shone through four liquids. In which will its path NOT be visible?
- Salt solution
- Milk diluted with water
- Starch in water
- Soap solution
Show answer
Answer: A. Salt solution is a true solution; its particles are too small to scatter light, so it shows no Tyndall effect. Starch, diluted milk and soap solution are colloids and make the beam visible.
-
3. What causes Brownian movement of colloidal particles?
- Gravity pulling them down
- Magnetic forces
- Light falling on them
- Uneven bombardment by molecules of the medium
Show answer
Answer: D. The fast-moving molecules of the dispersion medium hit each colloidal particle unevenly from different sides, pushing it in a zig-zag path.
-
4. Butter is an example of which type of colloid?
- Oil-in-water emulsion
- Water-in-oil emulsion
- Foam
- Aerosol
Show answer
Answer: B. In butter, droplets of water are dispersed in fat (oil), so it is a water-in-oil (W/O) emulsion. Milk and cream are oil-in-water.
-
5. Which pair of dispersed phase and dispersion medium describes a gel such as curd?
- Liquid in solid
- Solid in gas
- Gas in liquid
- Liquid in gas
Show answer
Answer: A. A gel has a liquid dispersed in a solid. Gas in liquid is a foam, solid in gas and liquid in gas are aerosols.
Sign in to keep track of the lessons you finish.