- Practice
- About 16 min
- 5 practice questions
Salts: types, water of crystallisation, identification and uses
Classify salts as normal, acid, basic and double salts, describe properties of salts, explain water of crystallisation, identify some metal ions by flame colour, and give uses of important salts.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how salts form and name the four types of salts.
- Describe the properties of salts.
- Explain water of crystallisation and hydrated versus anhydrous salts.
- Give uses of common salt, washing soda, baking soda, bleaching powder and plaster of Paris.
When you hear the word salt you probably think of the common salt in your kitchen, obtained from sea water. To a chemist, common salt is just one member of a large family. A salt is the product of the reaction between an acid and a base, and in water it gives positive and negative ions.
Acid + base → salt + water.
Types of salts
| Type | How it forms | Example |
|---|---|---|
| Normal salt | Complete neutralisation of an acid by a base | NaOH + HCl → NaCl + H₂O |
| Acid salt | Only part of the replaceable hydrogen of a polybasic acid is replaced by a metal | NaOH + H₂SO₄ → NaHSO₄ + H₂O |
| Basic salt | Only part of the hydroxide of a diacidic or triacidic base is replaced by an acid radical | Pb(OH)₂ + HCl → Pb(OH)Cl + H₂O |
| Double salt | Saturated solutions of two simple salts mixed in equal molar amounts and crystallised | Potash alum, KAl(SO₄)₂·12H₂O |
Worked example 1: normal or acid salt?
Question: Sulphuric acid reacts with sodium hydroxide in two ways. Write both and name the salts. Working: with 1 NaOH, only one H is replaced: H₂SO₄ + NaOH → NaHSO₄ + H₂O (sodium hydrogen sulphate, an acid salt - it still has a replaceable H). With 2 NaOH, both are replaced: H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O (sodium sulphate, a normal salt).
Properties of salts
- Most are solids with high melting and boiling points.
- Many dissolve in water - the chlorides of sodium and potassium, for instance - but some do not: silver chloride is insoluble.
- Many are odourless, white, crystalline solids; common salt forms cubic crystals with a salty taste.
Water of crystallisation
Many salts form crystals that contain a fixed number of water molecules, called water of crystallisation. Such salts are hydrated salts; the number of water molecules is written after a dot in the formula. Blue copper sulphate crystals are CuSO₄·5H₂O, copper sulphate pentahydrate. On heating they lose this water and become a white anhydrous powder; adding water back restores the blue colour. Salts without water of crystallisation are anhydrous. Other examples: ZnSO₄·7H₂O, FeSO₄·7H₂O, MgCl₂·6H₂O, CaCl₂·2H₂O and Na₂S₂O₃·5H₂O.
Copper sulphate and its water of crystallisation
- Blue CuSO₄·5H₂O crystals
- Heat: water driven off as steam
- White anhydrous CuSO₄
- Add a few drops of water
- Blue colour returns
Then back to step 1: Blue CuSO₄·5H₂O crystals
Worked example 2: how much of the crystal is water?
Question: Using Cu = 63.5, S = 32, O = 16, H = 1, find the percentage of water in CuSO₄·5H₂O. Working: CuSO₄ = 63.5 + 32 + 4 × 16 = 159.5. 5H₂O = 5 × 18 = 90. Total = 249.5. Water % = 90 ÷ 249.5 × 100 ≈ 36.1%. So heating 24.95 g of blue crystals drives off about 9.0 g of water.
Identifying salts
- Physical examination: colour, smell and density - useful but not reliable on its own.
- Dry heating: heating a little of the salt in a dry test tube and observing changes. Boiling a sample of ground water to dryness in a vessel leaves a deposit of the salts that were dissolved in it.
- Flame test (done by a teacher, since it uses concentrated hydrochloric acid): a paste of the salt with the acid on a clean platinum wire is held in a flame. Calcium gives a brick-red flame, sodium a golden-yellow flame and potassium a lilac (pink-violet) flame.
- Carbonates: adding dilute HCl gives carbon dioxide with brisk effervescence (fizzing).
Uses of important salts
| Salt | Formula | Uses |
|---|---|---|
| Common salt | NaCl | Food; preservative |
| Washing soda | Na₂CO₃ | Softening hard water; glass, soap and paper industries |
| Baking soda | NaHCO₃ | Baking powder (with tartaric acid) to make cakes soft and spongy; soda-acid fire extinguishers; antacid |
| Bleaching powder | CaOCl₂ | Disinfectant; bleaching cotton and linen |
| Plaster of Paris | CaSO₄·½H₂O | Plaster casts for broken bones; moulds for statues |
Key takeaways: salts form when acids react with bases; they may be normal, acid, basic or double salts. Hydrated salts such as CuSO₄·5H₂O hold water of crystallisation, which is lost on heating. Flame colours help identify metal ions (calcium brick red, sodium golden yellow, potassium lilac). Washing soda, baking soda, bleaching powder and plaster of Paris have important everyday uses.
Check your understanding
-
1. NaHSO₄ is an example of
- a normal salt
- a basic salt
- an acid salt
- a double salt
Show answer
Answer: C. NaHSO₄ forms when only one of the two replaceable hydrogens of H₂SO₄ is replaced by sodium; it still has a replaceable H, so it is an acid salt.
-
2. Potash alum is an example of
- a double salt
- a basic salt
- an acid salt
- an anhydrous salt
Show answer
Answer: A. Potash alum, KAl(SO₄)₂·12H₂O, crystallises from a solution of potassium sulphate and aluminium sulphate - a double salt.
-
3. What happens when blue copper sulphate crystals are heated strongly?
- They become more blue
- They turn green and melt
- They give off oxygen
- They turn white as they lose water of crystallisation
Show answer
Answer: D. Heating drives off the five water molecules, leaving white anhydrous copper sulphate; adding water turns it blue again.
-
4. A salt gives a golden-yellow flame in the flame test. Which metal ion is present?
- Calcium
- Sodium
- Potassium
- Copper
Show answer
Answer: B. Sodium ions give a golden-yellow flame; calcium gives brick red and potassium lilac.
-
5. Which salt is used for plaster casts on broken bones?
- Plaster of Paris
- Baking soda
- Washing soda
- Bleaching powder
Show answer
Answer: A. Plaster of Paris, CaSO₄·½H₂O, sets hard when mixed with water, so it is used for plaster casts and statue moulds.
Sign in to keep track of the lessons you finish.