• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Carbon and its Compounds

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions first without looking back at the lessons, note your answers, then check them against the explanations. The questions mix all five lessons and are a little harder than the lesson checks.

Final self-assessment

  1. 1. Which scientist first showed that diamond is pure carbon by burning equal masses of diamond and charcoal?

    1. Lavoisier
    2. Scheele
    3. Tennant
    4. Brodie
    Show answer

    Answer: C. In 1796 Smithson Tennant showed equal masses of diamond and charcoal give the same amount of carbon dioxide, so diamond is pure carbon.

  2. 2. How much carbon dioxide forms when 3 g of carbon burns completely? (12 g of C gives 44 g of CO₂.)

    1. 3 g
    2. 44 g
    3. 12 g
    4. 11 g
    Show answer

    Answer: D. 44 ÷ 12 × 3 = 11 g of carbon dioxide.

  3. 3. Which inorganic carbon compound is used in fire extinguishers?

    1. Carbon monoxide
    2. Carbon dioxide
    3. Carbon disulphide
    4. Calcium carbide
    Show answer

    Answer: B. Carbon dioxide does not support burning and is heavier than air, so it is used to put out fires.

  4. 4. Which property of carbon most directly allows starch and plastics to have chains of hundreds of carbon atoms?

    1. Allotropy
    2. Combustion
    3. Isomerism
    4. Catenation
    Show answer

    Answer: D. Catenation - carbon bonding to itself repeatedly - produces the long chains found in starch, cellulose and plastics.

  5. 5. Ethene, C₂H₄, contains a

    1. double bond and is an alkene
    2. single bond and is an alkane
    3. triple bond and is an alkyne
    4. ring and is an ether
    Show answer

    Answer: A. Ethene has a carbon-carbon double bond (H₂C=CH₂), so it is an alkene.

  6. 6. Which pair are isomers?

    1. Diamond and graphite
    2. Ethanol and dimethyl ether
    3. Methane and ethane
    4. CO and CO₂
    Show answer

    Answer: B. Ethanol and dimethyl ether share the formula C₂H₆O but have different structures. Diamond and graphite are allotropes; the others have different formulae.

  7. 7. Why is graphite soft while diamond is hard?

    1. Graphite contains hydrogen
    2. Diamond has free electrons
    3. Graphite's layers are held only by weak forces and slide over each other
    4. Graphite has four bonds per carbon
    Show answer

    Answer: C. Within each graphite layer the bonds are strong, but the layers are held together weakly by van der Waals forces, so they slide; diamond's bonds run in all three directions.

  8. 8. Which allotrope consists of a single layer of carbon atoms one atom thick?

    1. Fullerene
    2. Graphene
    3. Diamond
    4. Coke
    Show answer

    Answer: B. Graphene is a single honeycomb layer of carbon atoms; stacking many such layers gives graphite.

  9. 9. Buckminsterfullerene was named after

    1. a chemist who discovered it
    2. the place it was found
    3. a football player
    4. an architect whose domes it resembles
    Show answer

    Answer: D. It was named after the architect Buckminster Fuller, whose dome-shaped buildings have a similar framework.

  10. 10. Balance: C₂H₆ + O₂ → CO₂ + H₂O. For 2 molecules of ethane, how many O₂ molecules are needed?

    1. 7
    2. 5
    3. 3
    4. 4
    Show answer

    Answer: A. 2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O. Oxygen atoms on the right: 4 × 2 + 6 × 1 = 14, so 7 O₂ molecules.

  11. 11. Carbon reacts with steam at high temperature to form

    1. CO₂ and O₂
    2. CH₄
    3. CO and H₂ (water gas)
    4. CS₂
    Show answer

    Answer: C. C + H₂O → CO + H₂. The mixture of carbon monoxide and hydrogen is water gas.

  12. 12. Elemental carbon at room temperature

    1. reacts rapidly with water
    2. burns spontaneously
    3. does not react
    4. dissolves in water
    Show answer

    Answer: C. Elemental carbon is unreactive at room temperature and reacts only at high temperatures, unlike its many compounds.

  13. 13. A disposable cup is marked with resin code 6. It is made of

    1. polystyrene
    2. PVC
    3. PET
    4. polypropylene
    Show answer

    Answer: A. Code 6 is polystyrene (PS), which can release styrene into hot or oily drinks and food.

  14. 14. Which three plastic types does the textbook list as containing harmful chemicals?

    1. PET, HDPE, LDPE
    2. LDPE, PP, PS
    3. PP, PET, HDPE
    4. PVC, PS, PC/ABS
    Show answer

    Answer: D. PVC (code 3), PS (code 6) and PC/ABS (code 7) contain toxic additives or building blocks such as phthalates, styrene and BPA.

  15. 15. Why do plastic resin codes exist?

    1. To show the item is biodegradable
    2. To help sort different polymers for recycling
    3. To show the item's price
    4. To show it is safe to burn
    Show answer

    Answer: B. Different polymers cannot be recycled together, so resin codes (introduced in 1988) let recyclers sort them. The code alone does not mean the item is recyclable or safe.

Questions 1-3: lesson 1. Questions 4-6: lesson 2. Questions 7-9: lesson 3. Questions 10-12: lesson 4. Questions 13-15: lesson 5.

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery