Revision notes

Unit 6 Light: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Reflection, plane mirrors, lateral inversion and real and virtual images

Real image versus virtual image

  • Real image
    • Reflected rays actually meet
    • Can be caught on a screen
    • Always inverted
    • Formed in front of a mirror
  • Virtual image
    • Rays only appear to meet when produced backwards
    • Cannot be caught on a screen
    • Always erect
    • Seen behind a mirror, as in a plane mirror

Laws of reflection: incident ray, reflected ray and normal lie in one plane; ∠i = ∠r. A plane mirror forms a virtual, erect, same-size, laterally inverted image.

Key takeaways: angles of incidence and reflection are measured from the normal and are always equal. A plane mirror's image appears left-right reversed but is really reversed front to back. Real images can be caught on a screen and are inverted; virtual images cannot and are erect.

Read the full lesson

Lesson 2

Spherical mirrors, ray rules and images formed by a concave mirror

Terms used for spherical mirrors
TermMeaning
Pole (P)The midpoint of the mirror's surface
Centre of curvature (C)The centre of the sphere of which the mirror is a part
Radius of curvature (R)The radius of that sphere, the distance PC
Principal axisThe straight line through P and C, normal to the mirror at its centre
Principal focus (F)The point on the principal axis where rays parallel to it meet (concave) or appear to meet (convex) after reflection
Focal length (f)The distance PF; f = R/2
ApertureThe diameter of the mirror's circular rim
Object positionImage positionNature and size of image
At infinity (very far)At FReal, inverted, highly diminished (point-sized)
Beyond CBetween F and CReal, inverted, diminished
At CAt CReal, inverted, same size
Between C and FBeyond CReal, inverted, magnified
At FAt infinityNo image can be caught or seen: reflected rays are parallel
Between F and PBehind the mirrorVirtual, erect, magnified

Bringing an object closer to a concave mirror

  1. Far away Tiny real image at F
  2. Beyond C Small real image between F and C
  3. At C Same-size real image at C
  4. Between C and F Large real image beyond C
  5. At F Image at infinity
  6. Between F and P Large virtual, erect image behind the mirror

f = R/2. Concave mirror: object beyond F gives a real, inverted image; object between F and P gives a virtual, erect, magnified image.

Key takeaways: concave mirrors curve inward and can form both real and virtual images; the image depends on where the object is relative to C and F. Two rays from the four rules are enough to locate any image.

Read the full lesson

Lesson 3

Sign convention, the mirror equation and magnification

Signs for spherical mirrors
Mirroruf and Rv (real image)v (virtual image)Image height (real)Image height (virtual)
Concave−−−+−+
Convex−+No real image+No real image+

Mirror equation: 1/f = 1/v + 1/u, with f = R/2. Magnification: m = h₂/h₁ = −v/u. Negative m: real and inverted. Positive m: virtual and erect.

Solving a mirror problem

  1. Write the knowns with signs u always negative; f negative for concave, positive for convex
  2. Find v 1/v = 1/f − 1/u
  3. Read the sign of v Negative: real, in front; positive: virtual, behind
  4. Find m m = −v/u
  5. Find image height h₂ = m × h₁

Key takeaways: use the sign convention every time: measure from the pole, positive along the incident light, negative against it. Then 1/f = 1/v + 1/u gives the image distance and m = −v/u its size; the signs tell you whether the image is real or virtual.

Read the full lesson

Lesson 4

Uses of concave and convex mirrors, and the speed of light

Concave and convex mirrors at work

  • Concave mirror
    • Converges light to a focus
    • Real or virtual image, depending on object position
    • Dentist's mirror, make-up mirror
    • Torches, headlights, searchlights
    • Solar heaters, telescopes
  • Convex mirror
    • Spreads light out
    • Always virtual, erect, diminished image
    • Wide field of view
    • Rear-view mirrors
    • Hairpin bends, shop blind spots

Concave mirrors focus and magnify; convex mirrors always give a virtual, erect, diminished image with a wide field of view. Speed of light in vacuum ≈ 3 × 10⁸ m/s.

Key takeaways: concave mirrors are used where light must be concentrated or a nearby object magnified; convex mirrors are used where a wide, upright view is needed. Light's speed, first estimated by Roemer, is about 3 × 10⁸ m/s in vacuum.

Read the full lesson

Lesson 5

Refraction, Snell's law and total internal reflection

From refraction to total internal reflection (denser to rarer)

  1. Small angle of incidence Ray refracts away from the normal
  2. Larger angle Refracted ray bends closer to the surface
  3. Critical angle Angle of refraction = 90°, ray grazes the surface
  4. Beyond the critical angle All light reflected back: total internal reflection

Rarer to denser: towards the normal; denser to rarer: away from it. Snell's law: sin i / sin r = µ; µ = c/v. Total internal reflection: denser to rarer, angle of incidence > critical angle.

Key takeaways: light bends at a boundary because its speed changes. Snell's law links the angles through the refractive index, which also equals the ratio of speeds. Beyond the critical angle, light going from denser to rarer is totally reflected, which explains mirages and the sparkle of diamonds and makes optical fibres possible.

Read the full lesson

Privacy · Terms · Refunds · Delivery