- Practice
- About 15 min
- 5 practice questions
Uses of concave and convex mirrors, and the speed of light
Describe where concave and convex mirrors are used and why, explain the image in a rear-view mirror, solve a rear-view mirror problem and trace how the speed of light was measured.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give uses of concave mirrors and explain each.
- Describe the image formed by a convex mirror.
- Explain why convex mirrors are used as rear-view and road-safety mirrors.
- Calculate an image in a rear-view mirror.
- Outline the history of measuring the speed of light.
Each kind of spherical mirror has a 'talent'. A concave mirror can gather light to a point or magnify a nearby object; a convex mirror shows a wide area in a small upright image. Their uses follow from these talents.
Uses of concave mirrors
- Dentist's head mirror: concentrates a beam of light on a small area such as a tooth or the throat, and gives a magnified view.
- Make-up and shaving mirrors: held close (within the focal length), they give an erect, magnified image of the face.
- Reflectors in torches, vehicle headlights and searchlights: with the bulb at the focus, the reflected light leaves as a strong parallel beam.
- Solar heaters and furnaces: large concave mirrors focus sunlight to produce heat.
- Astronomical telescopes: large concave mirrors collect faint light from very distant stars, which forms a small, inverted image near the focus.
Images in a convex mirror
To draw the image, use two rays: one parallel to the principal axis, which reflects as if coming from F behind the mirror, and one aimed at C, which reflects back along its path. The reflected rays spread out but appear to meet behind the mirror when produced backwards (draw these extensions as dotted lines). Wherever the object is, a convex mirror always forms an image that is virtual, erect and diminished, between P and F behind the mirror. Move a pencil away from a convex mirror and its image becomes smaller still.
Uses of convex mirrors
Convex mirrors are used as rear-view mirrors in vehicles. They always give an erect image and a much wider field of view than a plane mirror of the same size, so the driver sees more of the road behind. As a vehicle behind comes closer, its image grows; as it falls back, the image shrinks. Because the image is smaller than the object, vehicles seem farther away than they are, which is why such mirrors may carry the warning 'Objects in the mirror are closer than they appear'. Convex mirrors are also fixed at sharp bends and hairpin bends on hill roads, where drivers cannot see oncoming traffic directly, and in shops to watch blind spots.
Concave and convex mirrors at work
-
Concave mirror
- Converges light to a focus
- Real or virtual image, depending on object position
- Dentist's mirror, make-up mirror
- Torches, headlights, searchlights
- Solar heaters, telescopes
-
Convex mirror
- Spreads light out
- Always virtual, erect, diminished image
- Wide field of view
- Rear-view mirrors
- Hairpin bends, shop blind spots
Worked example 1: a rear-view mirror
Question: A car's convex rear-view mirror has a focal length of 20 cm. A truck 2 m wide and 3 m high is 5 m behind. Find the image's position and size. Working: u = −500 cm, f = +20 cm. 1/v = 1/20 + 1/500 = (25 + 1)/500 = 26/500, so v = 500/26 ≈ 19.23 cm behind the mirror. m = −v/u = 19.23/500 ≈ 0.0385. Image width ≈ 0.0385 × 200 ≈ 7.7 cm; image height ≈ 0.0385 × 300 ≈ 11.5 cm. The image is virtual, erect and very small.
Worked example 2: which mirror?
Question: Sort these into concave and convex: rear-view mirror, dentist's mirror, torch reflector, shop security mirror, make-up mirror. Working: Concave: dentist's mirror, torch reflector, make-up mirror (they focus or magnify). Convex: rear-view mirror, shop security mirror (they give a wide view).
The speed of light
In the early seventeenth century the Italian scientist Galileo Galilei (1564-1642) tried to measure the speed of light using lanterns on distant hills, but light was far too fast. In the 1670s the Danish astronomer Ole Roemer made the first estimate, about 220 000 km per second, by timing the eclipses of one of Jupiter's moons. In 1849 Armand Fizeau made the first measurement on land. Today we know that light travels in vacuum at very nearly 3 × 10⁸ m/s (300 000 km/s). Light is fastest in vacuum and slower in materials such as water and glass.
Concave mirrors focus and magnify; convex mirrors always give a virtual, erect, diminished image with a wide field of view. Speed of light in vacuum ≈ 3 × 10⁸ m/s.
Key takeaways: concave mirrors are used where light must be concentrated or a nearby object magnified; convex mirrors are used where a wide, upright view is needed. Light's speed, first estimated by Roemer, is about 3 × 10⁸ m/s in vacuum.
Check your understanding
-
1. Which mirror is used as the reflector in a torch?
- Plane mirror
- Convex mirror
- Concave mirror
- No mirror is used
Show answer
Answer: C. With the bulb at the focus of a concave mirror, the reflected rays leave as a strong parallel beam, which is what a torch needs.
-
2. Why is a convex mirror used at a hairpin bend on a hill road?
- It gives a magnified image
- It gives a real image on a screen
- It focuses sunlight
- It gives a wide field of view with an erect image
Show answer
Answer: D. A convex mirror shows a much wider area than a plane or concave mirror, always with an erect image, so drivers can see vehicles coming round the bend.
-
3. The image formed by a convex mirror is always
- virtual, erect and diminished
- real, inverted and magnified
- real and same size
- virtual and magnified
Show answer
Answer: A. Wherever the object is placed, a convex mirror forms a virtual, erect and smaller image behind the mirror, between P and F.
-
4. What is the approximate speed of light in vacuum?
- 3 × 10⁵ m/s
- 3 × 10⁸ m/s
- 340 m/s
- 2.2 × 10⁸ km/s
Show answer
Answer: B. Light travels in vacuum at about 3 × 10⁸ m/s, that is 300 000 km/s. 340 m/s is roughly the speed of sound in air.
-
5. Why do dentists use concave mirrors?
- They give an erect, magnified image of the tooth and concentrate light on it
- They give a diminished image
- They show the whole mouth at once in a small image
- They are cheaper than plane mirrors
Show answer
Answer: A. Held close to a tooth (within its focal length), a concave mirror gives an erect, magnified image, and it can also concentrate light on the small area being examined.
Sign in to keep track of the lessons you finish.