• Practice
  • About 17 min
  • 5 practice questions

Change of state and latent heat

Name the changes of state, explain why temperature stays constant while a substance melts or boils, and use L = Q/m with specific latent heats of fusion and vaporisation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe melting, freezing, boiling, condensation and sublimation.
  • Read a heating curve for ice turning into steam.
  • Explain latent heat and why the temperature stays constant during a change of state.
  • Use L = Q/m and combine it with Q = mcΔT.

The change of a substance from one physical state to another at a definite temperature is called a change of state. Water is the everyday example: ice, water and steam are the same substance in three states.

Changes of state

  • Melting (fusion): solid to liquid by absorbing heat, at the melting point. Freezing: liquid to solid by giving out heat, at the freezing point. For water both are 0 °C.
  • Boiling (vaporisation): liquid to vapour by absorbing heat, at the boiling point. Condensation: vapour to liquid by giving out heat. For water both happen at 100 °C at normal pressure.
  • Sublimation: some solids, such as dry ice (solid carbon dioxide), iodine and naphthalene (moth balls), change straight from solid to gas without becoming liquid.

Changes of state of water

  1. Ice (solid) Melts at 0 °C, absorbing heat
  2. Water (liquid) Boils at 100 °C, absorbing heat
  3. Steam (gas) Condenses at 100 °C, giving out heat
  4. Water again Freezes at 0 °C, giving out heat, back to ice

Then back to step 1: Ice (solid)

The heating curve and latent heat

Heat crushed ice steadily in a beaker and read a thermometer every minute (with an adult, using a spirit lamp or hot plate). The reading stays at 0 °C until all the ice has melted, although heat is going in all the time. Then the temperature rises to 100 °C and stays there while the water boils, until it has all turned to steam. The heat taken in while the temperature is constant goes into changing the state, freeing the molecules from each other's hold, not into raising the temperature. 'Latent' means hidden, and this is called latent heat: the heat absorbed or released by a substance during a change of state without any change in temperature.

The heat absorbed during melting, and given out in equal amount during freezing, is the latent heat of fusion. The heat absorbed during boiling, and given out during condensation, is the latent heat of vaporisation. This is why steam at 100 °C gives a worse scald than water at 100 °C: as steam condenses on skin it gives out its large latent heat as well.

Specific latent heat

Latent heat per unit mass is the specific latent heat, L: L = Q/m, so Q = mL. Its SI unit is J/kg. For ice, the specific latent heat of fusion is about 3.34 × 10⁵ J/kg (the textbook also uses 336 J/g); the specific latent heat of vaporisation of water is much larger, about 2.26 × 10⁶ J/kg.

Worked example 1: melting ice

Question: How much heat melts 3 kg of ice at 0 °C (L = 336 J/g)? Working: m = 3000 g. Q = mL = 3000 × 336 = 1 008 000 J ≈ 1.01 × 10⁶ J.

Worked example 2: ice to warm water

Question: How much heat changes 2 kg of ice at 0 °C into water at 20 °C? (L = 3.34 × 10⁵ J/kg, c = 4200 J kg⁻¹ K⁻¹) Working: Melting: Q₁ = mL = 2 × 334 000 = 668 000 J. Warming: Q₂ = mcΔT = 2 × 4200 × 20 = 168 000 J. Total = 668 000 + 168 000 = 836 000 J.

Worked example 3: melting ice with boiling water

Question: How much water at 100 °C is needed to melt 1 kg of ice at 0 °C so that everything ends as water at 0 °C? (c = 4.2 J/g °C, L = 336 J/g) Working: Heat lost by hot water = heat gained by ice: m × 4.2 × (100 − 0) = 1000 × 336. So 420m = 336 000 and m = 800 g = 0.8 kg.

During melting or boiling the temperature stays constant: the heat supplied is latent heat. Q = mL; L in J/kg. Heat to warm without changing state: Q = mcΔT.

Key takeaways: heat changes the state of a substance at fixed temperatures: melting and freezing points, boiling and condensation points. While the state changes, the temperature stays constant and the heat supplied or released is latent heat, Q = mL.

Check your understanding

  1. 1. Which substance changes directly from solid to gas when heated?

    1. Ice
    2. Wax
    3. Naphthalene
    4. Butter
    Show answer

    Answer: C. Naphthalene (moth balls), like iodine and dry ice, sublimes: it turns straight from solid to vapour. Ice, wax and butter melt into liquids first.

  2. 2. While water is boiling at 100 °C and heat is still being supplied, its temperature

    1. keeps rising
    2. stays at 100 °C until all the water has turned to steam
    3. falls
    4. rises to 200 °C
    Show answer

    Answer: B. During a change of state the heat supplied is used as latent heat of vaporisation, so the temperature stays constant at the boiling point until all the liquid has changed.

  3. 3. How much heat is needed to melt 5 kg of ice at 0 °C? (Specific latent heat of fusion = 336 J/g)

    1. 1.68 × 10⁶ J
    2. 1680 J
    3. 6.72 × 10⁴ J
    4. 336 J
    Show answer

    Answer: A. m = 5 kg = 5000 g. Q = mL = 5000 × 336 = 1 680 000 J = 1.68 × 10⁶ J. Using 5 instead of 5000 g gives the wrong 1680 J.

  4. 4. Why does steam at 100 °C cause a more severe burn than boiling water at 100 °C?

    1. Steam is hotter than 100 °C
    2. Water does not burn
    3. Steam conducts heat better
    4. Steam gives out its large latent heat of vaporisation as it condenses on the skin
    Show answer

    Answer: D. When steam condenses on skin, it releases its latent heat of vaporisation in addition to the heat it gives out as hot water, so it delivers much more heat.

  5. 5. The SI unit of specific latent heat is

    1. J/kg
    2. J kg⁻¹ K⁻¹
    3. J/K
    4. kg/J
    Show answer

    Answer: A. Specific latent heat L = Q/m is heat per unit mass, so its unit is J/kg. There is no temperature in it because the temperature does not change.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Heat

Privacy · Terms · Refunds · Delivery