Revision notes

Unit 7 Heat: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Heat, internal energy and the effects of heat

What heating can do to a substance

  • Expansion
    • Molecules vibrate harder and push apart
    • Gases expand most, then liquids, then solids
    • Gaps in railway tracks
  • Change of state
    • Solid to liquid to gas on heating
    • Reverse on cooling
    • Ice to water to steam
  • Change in temperature
    • Particles move faster
    • Temperature rises on heating
    • Falls on cooling
  • Chemical change
    • Some reactions need heat to start
    • Heat changes the speed of reactions
    • Burning wood, cooking food

Internal energy = kinetic energy + potential energy of the molecules. Heat flows from a hotter body to a colder one until their temperatures are equal.

Key takeaways: heat is internal energy on the move, always from hot to cold. Heating can make a substance expand, change state, get hotter or change chemically; cooling reverses the first three.

Read the full lesson

Lesson 2

Conduction, convection and radiation

A convection current in air

  1. Ground heats the air above it
  2. Warm air expands, becomes less dense and rises
  3. Air cools higher up and becomes denser
  4. Cool air sinks and flows in to replace the rising air

Then back to step 1: Ground heats the air above it

Three ways heat travels

  • Conduction
    • Mainly in solids
    • Molecules vibrate in place
    • Needs matter
    • Slow
  • Convection
    • In liquids and gases
    • Fluid itself moves
    • Needs matter
    • Makes currents and breezes
  • Radiation
    • Electromagnetic waves
    • Needs no medium
    • Crosses a vacuum
    • Fastest: at the speed of light

Conduction: molecules pass on vibrations (solids). Convection: the fluid itself moves (liquids, gases). Radiation: electromagnetic waves, no medium needed.

Key takeaways: metals conduct heat well and insulators poorly. Warm fluids rise and cool ones sink, making convection currents and breezes. Radiation needs no medium, and light surfaces reflect it while dark ones absorb it.

Read the full lesson

Lesson 3

Temperature and the Fahrenheit, Celsius and Kelvin scales

Fixed points on the three scales
PointFahrenheit (°F)Celsius (°C)Kelvin (K)
Boiling point of water212100373.15
Melting point of ice320273.15
Absolute zeroabout −460 (−459.67)−273.150
Divisions between ice and steam points180100100

F = (9/5)C + 32; C = (5/9)(F − 32); K = C + 273.15.

Converting a temperature

  1. Start in °F Subtract 32, multiply by 5/9
  2. Now in °C Add 273.15
  3. Now in K Reverse: subtract 273.15 to get °C

Key takeaways: temperature measures hotness and decides the direction of heat flow. Celsius uses 0 and 100 for the ice and steam points, Fahrenheit 32 and 212, Kelvin 273.15 and 373.15. Absolute zero, 0 K = −273.15 °C, is the lowest possible temperature.

Read the full lesson

Lesson 4

Specific heat capacity and heat capacity

Specific heat capacity versus heat capacity

  • Specific heat capacity (c)
    • Heat for 1 kg to rise by 1 K
    • Depends only on the material
    • c = Q/(mΔT)
    • Unit J kg⁻¹ K⁻¹
  • Heat capacity (C′)
    • Heat for the whole body to rise by 1 K
    • Depends on material and mass
    • C′ = Q/ΔT = mc
    • Unit J/K

Q = mcΔT. Specific heat capacity c = Q/(mΔT) in J kg⁻¹ K⁻¹; heat capacity C′ = Q/ΔT = mc in J/K. In mixing: heat lost = heat gained.

Key takeaways: heat absorbed depends on mass, temperature rise and material. Water's high specific heat capacity makes it an excellent coolant and keeps lakes and seas at steady temperatures. Heat capacity is for a whole body; specific heat capacity is per kilogram.

Read the full lesson

Lesson 5

Change of state and latent heat

Changes of state of water

  1. Ice (solid) Melts at 0 °C, absorbing heat
  2. Water (liquid) Boils at 100 °C, absorbing heat
  3. Steam (gas) Condenses at 100 °C, giving out heat
  4. Water again Freezes at 0 °C, giving out heat, back to ice

Then back to step 1: Ice (solid)

During melting or boiling the temperature stays constant: the heat supplied is latent heat. Q = mL; L in J/kg. Heat to warm without changing state: Q = mcΔT.

Key takeaways: heat changes the state of a substance at fixed temperatures: melting and freezing points, boiling and condensation points. While the state changes, the temperature stays constant and the heat supplied or released is latent heat, Q = mL.

Read the full lesson

Privacy · Terms · Refunds · Delivery