• Practice
  • About 16 min
  • 5 practice questions

Reflection of sound, echo and reverberation

State the laws of reflection of sound, explain how megaphones and stethoscopes use multiple reflection, find the minimum distance for an echo, solve echo problems and explain reverberation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the laws of reflection of sound.
  • Explain how megaphones, horns and stethoscopes use multiple reflection.
  • Explain why an echo needs the reflector to be at least about 17 m away.
  • Solve echo problems using 2d = vt.
  • Explain reverberation and how halls are designed to control it.

Sound bounces off a hard wall like a rubber ball. Reflection of sound needs an obstacle that is large compared with the wavelength; it may be polished or rough.

Laws of reflection of sound

  1. The incident sound, the reflected sound and the normal at the point of incidence lie in the same plane.
  2. The angle of incidence equals the angle of reflection.

To check this, place two long tubes pointing at a hard wall at equal angles to the normal, with a ticking clock at the end of one tube and your ear at the other. The tick is heard loudest when the two angles are equal.

Uses of multiple reflection

  • Megaphones, loudspeaker horns, car horns and instruments such as the nathaswaram, shehnai and trumpet have a tube that opens into a cone. Repeated reflections from the walls send most of the sound forward towards the listeners instead of spreading it in all directions.
  • Stethoscope: sounds from the heart and lungs enter the chest-piece and reach the doctor's ears by multiple reflections inside the tube.

Echo

Shout or clap near a tall building or a hillside and you may hear the sound again a moment later: an echo. The sensation of a sound stays in our brain for about 0.1 s, so the reflected sound must arrive at least 0.1 s after the original to be heard separately. At 340 m/s, sound covers 340 × 0.1 = 34 m in 0.1 s. This is the distance to the reflector and back, so the reflector must be at least 34 ÷ 2 = 17 m away. The figure changes slightly with air temperature. Rolling thunder is caused by successive reflections of sound from clouds at different heights and from the land.

Echo: total path 2d = v × t. For a distinct echo, t ≥ 0.1 s, so the reflector must be at least about 17 m away (at 340 m/s).

Worked example 1: distance of a cliff

Question: A boy claps and hears the echo from a cliff 1.5 s later. Taking v = 340 m/s, how far away is the cliff? Working: 2d = vt = 340 × 1.5 = 510 m, so d = 255 m.

Worked example 2: finding the speed of sound

Question: A man fires a starting pistol and hears the echo from a hill after 4 s. He walks 340 m towards the hill, fires again and hears the echo after 2 s. Find the speed of sound. Working: First: 2d = 4v. Second: 2(d − 340) = 2v, so 2d − 680 = 2v. Substituting 2d = 4v: 4v − 680 = 2v, giving 2v = 680 and v = 340 m/s. (Check: d = 4 × 340 ÷ 2 = 680 m.)

Worked example 3: is an echo heard?

Question: A girl shouts 10 m from a wall. Will she hear a distinct echo (v = 340 m/s)? Working: Time for the round trip = 20 ÷ 340 ≈ 0.06 s, which is less than 0.1 s. The reflected sound merges with the original, so no distinct echo is heard.

Reverberation

In a big hall, a sound is reflected again and again from the walls, ceiling and floor, so it lingers until it becomes too faint to hear. This persistence of sound due to repeated reflection is reverberation. A little makes music sound full, but too much makes speech blurred and hard to follow. To reduce it, the walls and roof of auditoriums are covered with sound-absorbing materials such as compressed fibreboard, rough plaster, flannel cloth and heavy curtains, and seats are made of absorbing materials. The branch of physics that deals with designing halls, theatres and studios for good hearing is acoustics.

Echo versus reverberation

  • Echo
    • Distinct repeat of a sound
    • Reflector at least about 17 m away
    • Heard after at least 0.1 s
    • Hills, tall buildings, wells
  • Reverberation
    • Sound lingers and blurs
    • Many quick repeated reflections
    • In large closed halls
    • Reduced with absorbing materials

Key takeaways: sound obeys the same two laws of reflection as light. Horns and stethoscopes guide sound by multiple reflection. An echo needs at least 0.1 s delay, so a reflector at least about 17 m away; use 2d = vt. Reverberation is controlled with sound-absorbing materials.

Check your understanding

  1. 1. Why does a stethoscope carry sounds from a patient's chest clearly to the doctor's ears?

    1. It amplifies the sound electrically
    2. The sound reaches the ears by multiple reflections inside the tube
    3. It slows the sound down
    4. It changes sound into light
    Show answer

    Answer: B. Sound entering the chest-piece is reflected again and again from the inner walls of the tube, so little of it is lost before reaching the ear-pieces.

  2. 2. Why must the time gap between a sound and its echo be at least 0.1 s?

    1. Sound slows down after 0.1 s
    2. Echoes last only 0.1 s
    3. The sensation of a sound stays in the brain for about 0.1 s
    4. Walls absorb sound for 0.1 s
    Show answer

    Answer: C. Our brain retains a sound for about 0.1 s. A reflection arriving sooner merges with the original, so the echo is not heard as a separate sound.

  3. 3. A person hears the echo of a shout from a building 2 s later (v = 340 m/s). How far away is the building?

    1. 680 m
    2. 170 m
    3. 340 m
    4. 1360 m
    Show answer

    Answer: C. 2d = vt = 340 × 2 = 680 m, so d = 340 m. Forgetting to halve the round-trip distance gives the wrong 680 m.

  4. 4. What is the minimum distance of a reflector for a distinct echo when sound travels at 340 m/s?

    1. 34 m
    2. 17 m
    3. 3.4 m
    4. 170 m
    Show answer

    Answer: B. In 0.1 s sound travels 34 m, which is there and back. The reflector must be at least half of this, 17 m, away.

  5. 5. How is excessive reverberation in an auditorium reduced?

    1. By covering walls and roof with sound-absorbing materials
    2. By making the walls smooth and hard
    3. By removing all seats
    4. By increasing the volume of the speakers
    Show answer

    Answer: A. Materials such as fibreboard, rough plaster, curtains and cloth absorb sound, so fewer repeated reflections keep it lingering.

Privacy · Terms · Refunds · Delivery