Revision notes

Geography Unit 1 Lithosphere – I Endogenetic Processes: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The four spheres and the layers inside the Earth

Spheres of the Earth

  • Abiotic (non-living)
    • Lithosphere - rock
    • Atmosphere - air
    • Hydrosphere - water
  • Biotic (living)
    • Biosphere - plants, animals and micro-organisms
Layers of the Earth (standard approximate values)
LayerWhat it is likeApproximate thickness
CrustThin, solid, rigid outer skin on which we live; thicker under continents than under oceansAbout 5-10 km under oceans; about 30-50 km under continents (more under high mountains)
MantleHot, dense rock below the crust; mostly solid but able to flow very slowly; magma forms where rock partly meltsAbout 2,900 km
Outer coreLiquid, mainly iron and nickelAbout 2,200 km
Inner coreSolid, mainly iron and nickel; kept solid by enormous pressure; the hottest partRadius of about 1,200 km

Crust - SIAL and SIMA (silica with aluminium; silica with magnesium); core - NIFE (nickel and iron). The lithosphere = crust + uppermost mantle.

Key takeaways: The Earth has four spheres: three abiotic (lithosphere, atmosphere, hydrosphere) and one biotic (biosphere). Inside, it has a crust, a mantle about 2,900 km thick and a core with a liquid outer and solid inner part. Continental crust is SIAL, oceanic crust is SIMA and the core is NIFE. The lithosphere is the crust plus the top of the mantle.

Read the full lesson

Lesson 2

Rocks and the rock cycle

Rocks and the metamorphic rocks they can become
Original rockMetamorphic rock
GraniteGneiss
BasaltSchist
LimestoneMarble
SandstoneQuartzite

Three types of rock

  • Igneous Cooling of magma or lava
    • Primary or mother rocks
    • Granite, basalt
  • Sedimentary Layers of sediment harden
    • May contain fossils
    • Sandstone, limestone, coal
  • Metamorphic Heat and pressure change old rock
    • Change of form
    • Marble, gneiss, quartzite

The rock cycle

  1. Magma cools and crystallises into igneous rock
  2. Weathering and erosion break rock into sediments
  3. Sediments are transported and deposited in layers
  4. Layers harden into sedimentary rock
  5. Burial, heat and pressure form metamorphic rock
  6. Rock melts deep underground into magma

Then back to step 1: Magma cools and crystallises into igneous rock

Any stage can be short-cut: for example, igneous rock can be changed directly into metamorphic rock.

Igneous = cooled magma; sedimentary = hardened layers of sediment; metamorphic = old rock changed by heat and pressure. The rock cycle links all three.

Key takeaways: A rock is an aggregate of minerals. Igneous rocks form from cooled magma or lava and are the primary rocks; sedimentary rocks form from layers of deposits and may contain fossils; metamorphic rocks are rocks changed by heat and pressure, such as limestone to marble. The rock cycle continually turns each kind into the others.

Read the full lesson

Lesson 3

Geomorphic processes and plate tectonics

Internal and external processes

  • Endogenetic (internal) Act from inside the Earth
    • Build landforms
    • Powered by internal heat (radioactivity)
    • Folding, faulting, earthquakes, volcanoes
  • Exogenetic (external) Act on the surface
    • Wear landforms down
    • Agents: rivers, glaciers, wind, waves
    • Weathering, erosion, deposition

Types of plate boundaries

  • Convergent Plates move towards each other
    • One plate may sink under another: a subduction zone
    • Fold mountains, e.g. the Himalayas
    • Trenches, volcanoes, earthquakes
  • Divergent Plates pull away from each other
    • Magma pushes up from the mantle
    • New crust forms
    • e.g. the Mid-Atlantic Ridge
  • Transform (conservative) Plates slide past each other sideways
    • Crust is neither made nor destroyed
    • Mainly earthquakes
    • e.g. the San Andreas Fault, USA

From Gondwana to the Himalayas

  1. Indian Plate is part of Gondwana
  2. It breaks away and drifts north
  3. It collides with the Eurasian Plate
  4. Lateral compression folds the crust
  5. Himalayas and Tibetan Plateau rise

Convergent = plates meet (fold mountains, subduction); divergent = plates part (ridges, new crust); transform = plates slide past (earthquakes).

Key takeaways: Endogenetic forces build landforms using internal heat; exogenetic forces wear them down. The lithosphere is broken into tectonic plates moved by heat from the mantle. Plates converge (subduction, fold mountains), diverge (ridges like the Mid-Atlantic Ridge) or slide past one another (San Andreas Fault). Folding made the Himalayas and Alps; the Indian Plate's drift north from Gondwana and its collision with Eurasia raised the Himalayas.

Read the full lesson

Lesson 4

Earthquakes, seismic waves and tsunamis

How an earthquake happens

  1. Plates move and stress builds in rocks
  2. Rocks break or slip suddenly at the focus
  3. Energy spreads out as seismic waves
  4. Waves reach the epicentre and beyond
  5. The ground shakes
Types of seismic waves
WaveHow it travelsKey facts
Primary (P) wavesPush-and-pull waves, through solids, liquids and gasesFastest; arrive first
Secondary (S) wavesTransverse waves that shake the ground at right angles to their direction; through solids onlySlower than P-waves; arrive second
Surface (L) wavesTravel along the ground surfaceSlowest; arrive last; the most destructive

Focus = where it starts underground; epicentre = the surface point right above it. P-waves arrive first, S-waves second, surface waves last but do the most damage.

Key takeaways: An earthquake is a sudden shaking of the crust, starting at the focus; the epicentre lies directly above it. P-waves (fastest, through solids, liquids and gases), S-waves (solids only) and surface waves (slowest, most destructive) are the three wave types. A seismograph records them and the Richter scale measures magnitude. A tsunami is a series of giant sea waves set off by undersea earthquakes, explosions or landslides, as in the Indian Ocean in 2004.

Read the full lesson

Lesson 5

Volcanoes: parts, types, distribution and effects

Parts of a volcano

  • Magma chamber A large pool of molten rock beneath the surface
  • Vent The opening through which magma, gases and smoke escape
  • Volcanic cone The cone-shaped hill built from material thrown out of the vent
  • Crater The bowl-shaped hollow at the top of the volcano
Volcanoes by how often they erupt
TypeMeaningExample given in the textbook
ActiveErupts frequently, giving out lava, gases and fragmentsMount St. Helens, USA
Dormant (sleeping)No sign of activity for a long time, but may erupt suddenly and violentlyMount Fuji (Fujiyama), Japan
Extinct (dead)Has permanently stopped eruptingMount Kilimanjaro, Tanzania

Volcanoes by structure

  • Composite (strato) Cone built of many layers
    • Layers of hardened lava, pumice and ash
    • Steep, conical shape
    • Common around the Pacific; e.g. Mount Fuji
  • Shield Broad and low
    • Built by runny (low-viscosity) lava that flows far
    • Gently sloping sides like a warrior's shield
    • e.g. Mauna Loa, Hawaii
  • Dome (lava dome) Rounded mound
    • Thick, sticky, silica-rich lava
    • Lava cannot flow far from the vent
    • Builds a steep, roughly circular mound

Effects of volcanoes

  • Constructive Benefits
    • Volcanic material makes soil fertile for farming
    • Geothermal energy from hot regions
    • Tourist attractions
    • Building materials
  • Destructive Harm
    • Earthquakes, flash floods, mudslides, rockfalls
    • Lava burns or buries what lies in its path
    • Ash and dust make breathing difficult
    • Can change weather and disrupt transport

By eruption: active, dormant, extinct. By shape: composite (layers), shield (runny lava, gentle slopes), dome (sticky lava, steep mound). Most volcanoes lie on plate boundaries, above all the Pacific Ring of Fire.

Key takeaways: A volcano has a magma chamber, vent, cone and crater. By eruption it is active, dormant or extinct; by structure it is composite, shield or dome, depending largely on how runny the lava is. Most volcanoes and earthquakes lie along plate boundaries, especially the Pacific Ring of Fire. Volcanoes enrich soil and give geothermal energy but also destroy property, harm health and disrupt transport.

Read the full lesson

Privacy · Terms · Refunds · Delivery