• Practice
  • About 17 min
  • 5 practice questions

Water for agriculture: monsoons, irrigation and groundwater

Explain how Tamil Nadu depends on the monsoons and on groundwater for farming, read the shares of irrigation sources, and see why micro irrigation and the idea of virtual water matter.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain the roles of the north-east and south-west monsoons for Tamil Nadu's agriculture.
  • Describe the sources of irrigation and calculate their shares from the textbook's figures.
  • Explain the problems of over-using groundwater, the benefits of micro irrigation and the idea of virtual water.

Crops need water, and in Tamil Nadu water is the biggest limit on farming. This lesson looks at where the state's farm water comes from and why using it wisely is urgent.

Rivers and monsoons

The textbook points out that Tamil Nadu has no perennial rivers (rivers that flow throughout the year from their own sources such as snow). The state gets its water from the north-east and south-west monsoons.

  • North-east monsoon (October to December): a major source of water for Tamil Nadu. Its rains are stored in reservoirs, lakes (tanks), ponds and wells for cultivation.
  • South-west monsoon: brings heavy rain to the catchment area of the Cauvery in Karnataka. When the dams there fill, water flows down the Cauvery into Tamil Nadu.

The textbook adds that the Cauvery is the third largest river in South India, with a length it gives as 765 km, and that the Mettur Dam and the Kallanai (Grand Anicut) are built across it in Tamil Nadu. Thanjavur district in the Cauvery delta is known as the rice bowl (Nerkalanjiyam) of Tamil Nadu.

Irrigation sources

According to the textbook, about 57% of the cultivated area in Tamil Nadu is irrigated. The state has 2,239 canals with a total length of 9,750 km, thousands of small and large lakes (tanks), about 15 lakh open wells and 3,54,000 borewells. The area each source irrigates is:

Irrigated area by source in Tamil Nadu
SourceArea irrigated (lakh hectares), according to the textbook
Open wells11.91
Canals6.68
Borewells4.93
Lakes (tanks)3.68

Worked example 1: share of each source

Question: Find the share of wells (open wells and borewells together), canals and lakes in the irrigated area. Working: Total = 11.91 + 6.68 + 4.93 + 3.68 = 27.20 lakh ha. Wells = 11.91 + 4.93 = 16.84; 16.84 ÷ 27.20 ≈ 62%. Canals = 6.68 ÷ 27.20 ≈ 25% (the textbook rounds it to 24%). Lakes = 3.68 ÷ 27.20 ≈ 14%. Answer: Wells about 62%, canals about a quarter, lakes about 14%, which matches the textbook's chart (wells 62%, canals 24%, lakes 14%).

Where irrigation water comes from (textbook shares)

  • Wells (open + bore)
    • About 62%
    • Groundwater
  • Canals
    • About 24%
    • River water
  • Lakes (tanks)
    • About 14%
    • Stored rainwater

Dependence on groundwater and its problems

Since wells irrigate most of the land, Tamil Nadu's agriculture depends mostly on groundwater. There would be no problem if the water taken out each year equalled the water that seeps back in during the rainy season. But when more is taken out, the water table falls; wells can dry up completely or the water can become unusable (for example, salty). The level and quality of groundwater are monitored by the Central Ground Water Board (the textbook calls it the Union Ground Water Board). The textbook draws three lessons: farming in Tamil Nadu depends on groundwater; regulating its use is urgent; and this is essential for sustainable farming.

Micro irrigation

Micro irrigation (such as drip and sprinkler systems) supplies only the required amount of water at regular intervals, close to the plants. Compared with flooding the field, it uses water more efficiently, gives higher yields, reduces labour costs and weed growth, and, since fertiliser can be given through the water, uses fertiliser better. Because Tamil Nadu gets insufficient rainfall, the government has taken many measures to spread micro irrigation.

Virtual water

The term virtual water was introduced by the geographer Tony Allan (spelt 'Tony Allen' in the textbook) in the 1990s. It means the water used up in producing an agricultural or industrial product. When the product is traded, the water used to make it is in effect traded too. The textbook gives the example that, on a world average, about 1,340 cubic metres of water are needed to produce one metric tonne of wheat; exporting that tonne of wheat is like exporting that much water.

Worked example 2: virtual water (using the textbook's wheat figure)

Question: A (made-up) trader exports 50 tonnes of wheat. Using the textbook's world-average figure of 1,340 cubic metres per tonne, how much virtual water is exported? Working: 50 × 1,340 = 67,000 cubic metres. Answer: 67,000 cubic metres of water leaves with the wheat. A water-short region should think about this before growing very thirsty crops for export.

Tamil Nadu agriculture depends mostly on groundwater, so its use must be regulated; micro irrigation gives more crop per drop.

Key takeaways: Tamil Nadu has no perennial rivers and depends on the north-east monsoon (October–December) and on south-west monsoon water reaching it through the Cauvery. About 57% of cultivated land is irrigated, mostly by wells (about 62%), then canals and lakes. Over-use of groundwater lowers the water table, so its use must be regulated; micro irrigation and awareness of virtual water help use water sustainably.

Check your understanding

  1. 1. The north-east monsoon period in Tamil Nadu is:

    1. August–October
    2. September–November
    3. November–January
    4. October–December
    Show answer

    Answer: D. The north-east monsoon brings rain to Tamil Nadu from October to December.

  2. 2. According to the textbook, about what share of the cultivated area in Tamil Nadu is irrigated?

    1. 27%
    2. 57%
    3. 28%
    4. 49%
    Show answer

    Answer: B. The textbook states that about 57% of the area under cultivation is irrigated.

  3. 3. Which source irrigates the largest share of land in Tamil Nadu?

    1. Wells (groundwater)
    2. Canals
    3. Lakes (tanks)
    4. Rivers that flow all year
    Show answer

    Answer: A. Open wells and borewells together irrigate about 62% of the irrigated area, so agriculture depends mostly on groundwater.

  4. 4. Which of these is NOT a benefit of micro irrigation described in the lesson?

    1. Higher yields
    2. Less weed growth
    3. Lower labour costs
    4. Using much more water than flood irrigation
    Show answer

    Answer: D. Micro irrigation gives only the water needed, so it saves water. The other three are listed benefits.

  5. 5. Using the textbook's world-average figure of 1,340 cubic metres per tonne, how much virtual water is in 3 tonnes of wheat?

    1. 1,343 cubic metres
    2. 4,020 cubic metres
    3. 447 cubic metres
    4. 13,400 cubic metres
    Show answer

    Answer: B. 3 × 1,340 = 4,020 cubic metres.

Privacy · Terms · Refunds · Delivery