Chapter 5 Thermodynamics
Practice questions
Assertion (A): An exothermic reaction whose system entropy decreases can still be spontaneous. Reason (R): In every spontaneous process the entropy of the system must increase.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: C
A is true: the heat released raises the entropy of the surroundings by −ΔH/T, and if this outweighs the fall in system entropy, ΔStotal > 0 (equivalently ΔG < 0 at low enough T). R is false: it is the total entropy of system plus surroundings that must increase, not the system's alone.
A reaction has ΔrG° = +10.0 kJ mol⁻¹ at 298 K. What is its equilibrium constant? (R = 8.314 J mol⁻¹ K⁻¹)
- 57
- 1.8 × 10⁻²
- 0.75
- 1.0 × 10⁻¹⁰
Answer and explanation
Answer: B
log K = −ΔrG°/(2.303RT) = −10 000 ÷ (2.303 × 8.314 × 298) = −10 000 ÷ 5706 ≈ −1.75. K = 10⁻¹·⁷⁵ ≈ 1.8 × 10⁻². A positive ΔrG° gives K < 1.
For N₂(g) + 3H₂(g) → 2NH₃(g), ΔH° = −92.2 kJ mol⁻¹ and ΔS° = −198.7 J K⁻¹ mol⁻¹ (taken as constant). Above roughly what temperature does the reaction stop being spontaneous?
- 464 K
- 0.46 K
- 298 K
- 2155 K
Answer and explanation
Answer: A
Both ΔH and ΔS are negative, so ΔG = ΔH − TΔS is negative at low T and turns positive above T = ΔH/ΔS = 92 200 ÷ 198.7 ≈ 464 K.
Assertion (A): Bond enthalpies give the exact ΔrH° for reactions involving liquids and solids. Reason (R): Bond enthalpies refer to breaking bonds in gaseous molecules.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: D
R is true: bond enthalpies are defined for species in the gas phase. A is false: the bond-enthalpy method is only an approximation and applies to reactions in which every substance is a gas; for liquids and solids, enthalpies of vaporisation or sublimation would also be involved.
For KCl: ΔsubH(K) = +89.0, ΔiH(K) = +419, ½ΔbondH(Cl₂) = +121, ΔegH(Cl) = −348.6 and ΔlatticeH(KCl) = +717.1 (all kJ mol⁻¹). What is ΔfH° of KCl(s)?
- −436.7 kJ mol⁻¹
- +436.7 kJ mol⁻¹
- −997.5 kJ mol⁻¹
- −280.4 kJ mol⁻¹
Answer and explanation
Answer: A
Route from elements: K(s) → K(g) → K⁺(g); ½Cl₂ → Cl(g) → Cl⁻(g); then the gaseous ions form the lattice, which is minus the lattice enthalpy. ΔfH° = 89.0 + 419 + 121 − 348.6 − 717.1 = −436.7 kJ mol⁻¹.
Using mean bond enthalpies C–H = 414, Cl–Cl = 243, C–Cl = 330 and H–Cl = 431 kJ mol⁻¹, estimate ΔrH° for CH₄(g) + Cl₂(g) → CH₃Cl(g) + HCl(g).
- +104 kJ
- −347 kJ
- −104 kJ
- −1418 kJ
Answer and explanation
Answer: C
Only one C–H and one Cl–Cl bond break; the other three C–H bonds survive. Broken: 414 + 243 = 657 kJ. Formed: 330 + 431 = 761 kJ. ΔrH° ≈ 657 − 761 = −104 kJ.
For which substance is the standard enthalpy of formation zero at 298 K?
- Br₂(g)
- O₃(g)
- Br₂(l)
- C(diamond)
Answer and explanation
Answer: C
ΔfH° is zero only for an element in its reference state, its most stable form at 298 K and 1 bar. For bromine that is the liquid. Br₂(g), ozone and diamond are not reference states, so their ΔfH° values are not zero.
How much heat converts 9.0 g of ice at 0 °C into steam at 100 °C? Use ΔfusH = 6.00 kJ mol⁻¹, Cm(water) = 75.3 J mol⁻¹ K⁻¹, ΔvapH = 40.79 kJ mol⁻¹ at 100 °C.
- 23.4 kJ
- 27.2 kJ
- 54.3 kJ
- 6.77 kJ
Answer and explanation
Answer: B
n = 9.0 ÷ 18 = 0.50 mol. Melting: 0.50 × 6.00 = 3.00 kJ. Warming 0 → 100 °C: 0.50 × 75.3 × 100 = 3765 J = 3.77 kJ. Boiling: 0.50 × 40.79 = 20.40 kJ. Total = 3.00 + 3.77 + 20.40 ≈ 27.2 kJ.
0.250 g of naphthalene (C₁₀H₈, M = 128 g mol⁻¹) burns in a bomb calorimeter of heat capacity 5.00 kJ K⁻¹, and the temperature rises by 2.01 K. What is ΔU of combustion per mole?
- −10.1 kJ mol⁻¹
- +5.15 × 10³ kJ mol⁻¹
- −1.29 × 10³ kJ mol⁻¹
- −5.15 × 10³ kJ mol⁻¹
Answer and explanation
Answer: D
Heat gained by the calorimeter = 5.00 × 2.01 = 10.05 kJ, so q(reaction) = −10.05 kJ. Moles burnt = 0.250 ÷ 128 = 1.953 × 10⁻³ mol. ΔU = −10.05 ÷ 1.953 × 10⁻³ ≈ −5.15 × 10³ kJ mol⁻¹ (negative: combustion releases heat).
Which set contains only intensive properties?
- Temperature, density, molar volume
- Mass, volume, temperature
- Enthalpy, pressure, density
- Heat capacity, internal energy, pressure
Answer and explanation
Answer: A
Temperature, density and molar volume do not depend on the amount of substance. Mass, volume, enthalpy, heat capacity and internal energy all scale with the amount, so they are extensive.
For 2CO(g) + O₂(g) → 2CO₂(g), ΔH = −566.0 kJ at 298 K. What is ΔU? (R = 8.314 J mol⁻¹ K⁻¹)
- −563.5 kJ
- −568.5 kJ
- −566.0 kJ
- −561.0 kJ
Answer and explanation
Answer: A
Δng = 2 − (2 + 1) = −1. ΔU = ΔH − ΔngRT = −566.0 − (−1)(8.314 × 298 × 10⁻³) = −566.0 + 2.48 = −563.5 kJ.
1.0 mol of an ideal gas expands reversibly and isothermally at 400 K from 2.0 L to 20.0 L. How much heat does it absorb? (R = 8.314 J mol⁻¹ K⁻¹)
- Zero
- +3.33 kJ
- −7.66 kJ
- +7.66 kJ
Answer and explanation
Answer: D
w = −2.303 nRT log(Vf/Vi) = −2.303 × 1.0 × 8.314 × 400 × log 10 = −7659 J. For an isothermal change of an ideal gas ΔU = 0, so q = −w = +7.66 kJ.
Assertion (A): The absolute value of the internal energy of a system cannot be measured; only ΔU can. Reason (R): Internal energy is a state function.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: B
Both statements are true. But being a state function only means ΔU depends on the end states; it does not explain why the absolute value is unknown. That comes from U including many energy terms (nuclear, electronic, bond energies) that cannot all be added up. So R does not explain A.
Hot tea is sealed inside a closed steel can and left on a table. As a thermodynamic system, the tea is
- open, because energy leaves it
- closed, because energy can leave but matter cannot
- isolated, because the can is sealed
- adiabatic, because the walls are metal
Answer and explanation
Answer: B
Sealing stops matter crossing the boundary, but steel conducts heat, so energy passes to the room. Energy exchange without matter exchange makes it a closed system. An isolated system would need insulating walls.
A gas goes from state X to state Y. On path 1 it absorbs 60 J of heat and does 25 J of work. On path 2 it absorbs 15 J of heat. How much work is done on the gas on path 2?
- −20 J
- +45 J
- +20 J
- −45 J
Answer and explanation
Answer: C
Path 1: ΔU = q + w = 60 + (−25) = +35 J. U is a state function, so ΔU is +35 J on path 2 too. Then 35 = 15 + w, so w = +20 J: 20 J of work is done on the gas.
For a reaction, ΔH = +40 kJ mol⁻¹ and ΔS = +125 J K⁻¹ mol⁻¹ (assumed constant). Above what temperature is it spontaneous?
- 0.32 K
- 273 K
- 320 K
- 3125 K
Answer and explanation
Answer: C
At the switch-over ΔG = 0, so T = ΔH/ΔS = 40 000 J mol⁻¹ ÷ 125 J K⁻¹ mol⁻¹ = 320 K. Above 320 K, TΔS > ΔH and ΔG < 0.
Assertion (A): Many endothermic reactions with a positive entropy change become spontaneous at high temperature. Reason (R): In ΔG = ΔH − TΔS, the term −TΔS becomes more negative as T rises when ΔS is positive.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Both are true. Because −TΔS grows more negative with temperature, at a high enough T it outweighs the positive ΔH and makes ΔG negative. R therefore explains A.
The equilibrium constant of a reaction at 300 K is 100. What is ΔrG°? (R = 8.314 J mol⁻¹ K⁻¹)
- −11.5 kJ mol⁻¹
- +11.5 kJ mol⁻¹
- −5.74 kJ mol⁻¹
- −26.5 kJ mol⁻¹
Answer and explanation
Answer: A
ΔrG° = −2.303 RT log K = −2.303 × 8.314 × 300 × log 100 = −2.303 × 8.314 × 300 × 2 ≈ −11 488 J mol⁻¹ ≈ −11.5 kJ mol⁻¹.
A reaction has ΔH > 0 and ΔS > 0. When is it spontaneous?
- At all temperatures
- Only at high temperatures
- Only at low temperatures
- At no temperature
Answer and explanation
Answer: B
ΔG = ΔH − TΔS. With both positive, ΔG is positive when T is small and becomes negative once TΔS exceeds ΔH, that is, above T = ΔH/ΔS.
A liquid boils at 350 K with ΔvapH = 35.0 kJ mol⁻¹. What is its entropy of vaporisation?
- +10 J K⁻¹ mol⁻¹
- +0.10 J K⁻¹ mol⁻¹
- −100 J K⁻¹ mol⁻¹
- +100 J K⁻¹ mol⁻¹
Answer and explanation
Answer: D
Boiling at the boiling point is reversible, so ΔS = qrev/T = 35 000 J mol⁻¹ ÷ 350 K = +100 J K⁻¹ mol⁻¹. It is positive because the gas is far more disordered than the liquid.