Chapter 6 Equilibrium

Practice questions

Assertion (A): The pH of an ammonium acetate solution hardly changes when it is diluted. Reason (R): For a salt of a weak acid and a weak base, pH = 7 + ½(pKa − pKb), an expression that contains no concentration term.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

Both are true, and R explains A: the degree of hydrolysis of such a salt is independent of concentration, so its pH is set by pKa and pKb alone.

A sparingly soluble salt AB₂ has Ksp = 4.0 × 10⁻¹⁵. What is its molar solubility in a solution that is already 0.10 M in B⁻ ions?

  1. 1.0 × 10⁻⁵ M
  2. 4.0 × 10⁻¹³ M
  3. 4.0 × 10⁻¹⁴ M
  4. 2.0 × 10⁻⁷ M
Answer and explanation

Answer: B

Ksp = [A²⁺][B⁻]² = S(0.10 + 2S)² ≈ S(0.10)². S = 4.0 × 10⁻¹⁵/0.010 = 4.0 × 10⁻¹³ M, far below the 1.0 × 10⁻⁵ M it has in pure water (where 4S³ = 4.0 × 10⁻¹⁵).

50 mL of 0.20 M CH₃COOH is mixed with 25 mL of 0.20 M NaOH. Taking pKa of acetic acid as 4.74, what is the pH of the mixture?

  1. 2.87
  2. 7.00
  3. 4.74
  4. 9.26
Answer and explanation

Answer: C

Acid = 10 mmol, NaOH = 5 mmol. The base converts 5 mmol acid to acetate, leaving 5 mmol acid and 5 mmol acetate. The ratio [salt]/[acid] = 1, so pH = pKa + log 1 = 4.74: a buffer.

The pKb of a weak base B is 9.40 at 298 K. What is Ka of its conjugate acid BH⁺? (log 2.5 = 0.40)

  1. 2.5 × 10⁻⁵
  2. 4.0 × 10⁻¹⁰
  3. 9.4 × 10⁻⁵
  4. 2.5 × 10⁻¹⁰
Answer and explanation

Answer: A

pKa = 14 − pKb = 14 − 9.40 = 4.60. Ka = 10⁻⁴·⁶⁰ = 10⁰·⁴⁰ × 10⁻⁵ = 2.5 × 10⁻⁵.

A 0.040 M solution of a weak monobasic acid has Ka = 2.5 × 10⁻⁵. What are its pH and degree of ionization?

  1. pH 3.00, α = 0.025 %
  2. pH 1.40, α = 100 %
  3. pH 6.00, α = 2.5 %
  4. pH 3.00, α = 2.5 %
Answer and explanation

Answer: D

[H⁺] = √(Ka·c) = √(2.5 × 10⁻⁵ × 0.040) = √(1.0 × 10⁻⁶) = 1.0 × 10⁻³ M, so pH = 3.00. α = [H⁺]/c = 1.0 × 10⁻³/0.040 = 0.025 = 2.5 %.

What is the pH of 5.0 × 10⁻⁸ M HCl at 298 K, allowing for the ionization of water?

  1. 7.30
  2. 6.89
  3. 7.00
  4. 8.30
Answer and explanation

Answer: B

[H⁺] = 5.0 × 10⁻⁸ + x and [OH⁻] = x with (5.0 × 10⁻⁸ + x)x = 1.0 × 10⁻¹⁴. Solving x² + 5.0 × 10⁻⁸x − 1.0 × 10⁻¹⁴ = 0 gives x = 7.8 × 10⁻⁸, so [H⁺] = 1.28 × 10⁻⁷ M and pH = 6.89. The value 7.30 ignores water and wrongly makes an acid solution basic.

In HCO₃⁻(aq) + OH⁻(aq) ⇌ CO₃²⁻(aq) + H₂O(l), which two species act as Brönsted-Lowry acids?

  1. HCO₃⁻ and H₂O
  2. OH⁻ and CO₃²⁻
  3. HCO₃⁻ and CO₃²⁻
  4. OH⁻ and H₂O
Answer and explanation

Answer: A

In the forward reaction HCO₃⁻ donates a proton to OH⁻; in the reverse reaction H₂O donates a proton to CO₃²⁻. So the acids are HCO₃⁻ and H₂O, and the bases are OH⁻ and CO₃²⁻.

Assertion (A): Adding an iron catalyst to an equilibrium mixture of N₂, H₂ and NH₃ increases the amount of NH₃. Reason (R): A catalyst speeds up the forward and the reverse reactions equally.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: D

A is false: a catalyst does not change the equilibrium composition, only the time needed to reach it. R is true, and it is why the composition stays the same.

For PCl₅(g) ⇌ PCl₃(g) + Cl₂(g), ΔH is positive. Which change increases the value of Kc?

  1. Adding more PCl₅
  2. Raising the temperature
  3. Increasing the pressure
  4. Adding a catalyst
Answer and explanation

Answer: B

Only temperature changes K. For an endothermic reaction K increases with temperature. Adding PCl₅ or changing pressure shifts the position without changing K; a catalyst changes neither.

For a reaction at 298 K, ΔG° = −17.1 kJ mol⁻¹. What is K? (Take 2.303RT = 5706 J mol⁻¹ at 298 K.)

  1. 1.0 × 10³
  2. 1.0 × 10⁻³
  3. 3.0
  4. 17.1
Answer and explanation

Answer: A

log K = −ΔG°/(2.303RT) = 17 100/5706 = 3.0, so K = 10³ = 1.0 × 10³. A negative ΔG° must give K > 1.

For H₂(g) + I₂(g) ⇌ 2HI(g), Kc = 64. Starting with 0.10 M H₂ and 0.10 M I₂ only, what is the equilibrium concentration of HI?

  1. 0.080 M
  2. 0.020 M
  3. 0.18 M
  4. 0.16 M
Answer and explanation

Answer: D

Let x react: [H₂] = [I₂] = 0.10 − x, [HI] = 2x. (2x)²/(0.10 − x)² = 64, so 2x/(0.10 − x) = 8, 2x = 0.80 − 8x, 10x = 0.80, x = 0.080. [HI] = 2x = 0.16 M.

Solid NH₄HS is placed in an evacuated flask and NH₄HS(s) ⇌ NH₃(g) + H₂S(g) reaches equilibrium with Kp = 0.090 bar². What is the total pressure in the flask?

  1. 0.30 bar
  2. 0.090 bar
  3. 0.60 bar
  4. 0.18 bar
Answer and explanation

Answer: C

The solid is left out: Kp = p(NH₃) × p(H₂S). Both gases form in equal amounts, so p² = 0.090 and p = 0.30 bar each. Total pressure = 0.30 + 0.30 = 0.60 bar.

For N₂(g) + 3H₂(g) ⇌ 2NH₃(g), Kc = 0.50 at a certain temperature. What is Kc for 4NH₃(g) ⇌ 2N₂(g) + 6H₂(g) at the same temperature?

  1. 0.25
  2. 2.0
  3. −1.0
  4. 4.0
Answer and explanation

Answer: D

Reversing gives 1/0.50 = 2.0; doubling the equation squares it: (2.0)² = 4.0.

A few crystals of NaCl containing radioactive sodium are dropped into a saturated solution of ordinary NaCl at constant temperature. After some time:

  1. the solution stays non-radioactive because no more salt can dissolve
  2. radioactivity appears in the solution, though the dissolved amount of NaCl is unchanged
  3. all the radioactive crystals dissolve and the solution becomes supersaturated
  4. the radioactive crystals grow while the solution becomes dilute
Answer and explanation

Answer: B

In a saturated solution dissolution and crystallisation go on at equal rates. Radioactive ions dissolve while ordinary ions crystallise, so radioactivity spreads into the solution with no net change in concentration: the equilibrium is dynamic.

A sealed flask contains water in equilibrium with its vapour at 30 °C. More water at 30 °C is added through a tap and the flask is resealed, temperature unchanged. Once equilibrium is restored, the vapour pressure will be:

  1. higher, because there is more liquid to evaporate
  2. lower, because the vapour space is smaller
  3. the same as before
  4. zero until the new water warms up
Answer and explanation

Answer: C

Equilibrium vapour pressure depends only on the liquid and the temperature, not on how much liquid is present or on the vapour volume. At 30 °C it returns to the same value.

Equal volumes of 1.0 × 10⁻⁵ M AgNO₃ and 1.0 × 10⁻⁵ M NaCl are mixed. Ksp of AgCl = 1.8 × 10⁻¹⁰. What happens?

  1. A precipitate forms, because Qsp is greater than Ksp
  2. No precipitate forms, because Qsp = 2.5 × 10⁻¹¹ is below Ksp
  3. A precipitate forms, because Qsp equals Ksp
  4. No precipitate forms, because Qsp = 1.0 × 10⁻¹⁰ is below Ksp
Answer and explanation

Answer: B

After mixing, [Ag⁺] = [Cl⁻] = 5.0 × 10⁻⁶ M (each is halved). Qsp = (5.0 × 10⁻⁶)² = 2.5 × 10⁻¹¹, which is less than 1.8 × 10⁻¹⁰, so the solution is unsaturated and nothing precipitates.

Assertion (A): Diluting an acetic acid-sodium acetate buffer tenfold with water lowers its pH by one unit. Reason (R): By the Henderson-Hasselbalch equation, the pH of such a buffer depends on the ratio [salt]/[acid].

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: D

A is false: dilution divides both concentrations by the same factor, so the ratio, and hence the pH, stays the same. R is true, and it is exactly why A is false.

The molar solubility of a sparingly soluble salt M₂X is 1.0 × 10⁻⁴ mol L⁻¹. What is its Ksp?

  1. 1.0 × 10⁻⁸
  2. 2.0 × 10⁻¹²
  3. 4.0 × 10⁻¹²
  4. 1.0 × 10⁻¹²
Answer and explanation

Answer: C

M₂X ⇌ 2M⁺ + X²⁻, so [M⁺] = 2S and [X²⁻] = S. Ksp = (2S)²(S) = 4S³ = 4 × (1.0 × 10⁻⁴)³ = 4.0 × 10⁻¹².

Which salt gives an acidic solution in water?

  1. NH₄Cl
  2. CH₃COONa
  3. NaCl
  4. KNO₃
Answer and explanation

Answer: A

NH₄Cl is the salt of a strong acid (HCl) and a weak base; NH₄⁺ hydrolyses, NH₄⁺ + H₂O ⇌ NH₄OH + H⁺, so pH < 7. CH₃COONa is basic; NaCl and KNO₃ are neutral.

A buffer contains 0.10 M of a weak acid HA (pKa = 4.74) and 0.30 M of its sodium salt NaA. What is its pH? (log 3 = 0.477)

  1. 4.26
  2. 5.22
  3. 5.04
  4. 4.74
Answer and explanation

Answer: B

pH = pKa + log([salt]/[acid]) = 4.74 + log(0.30/0.10) = 4.74 + 0.477 = 5.22. (4.26 comes from inverting the ratio.)

Privacy · Terms · Refunds · Delivery