Chapter 8 Organic Chemistry - Some Basic Principles and Techniques

Practice questions

0.300 g of a compound containing only C, H and O gives 0.440 g of CO₂ and 0.180 g of H₂O on combustion. What is its empirical formula?

  1. CHO
  2. C₂H₄O
  3. CH₂O
  4. CH₂O₂
Answer and explanation

Answer: C

C = 12/44 × 0.440 = 0.120 g (0.010 mol). H = 2/18 × 0.180 = 0.020 g (0.020 mol). O = 0.300 − 0.120 − 0.020 = 0.160 g (0.010 mol). Ratio C : H : O = 1 : 2 : 1, so CH₂O.

The ammonia from 0.30 g of urea is absorbed in 40.0 mL of 0.25 M H₂SO₄. The remaining acid needs 50.0 mL of 0.20 M NaOH. What percentage of nitrogen does this give?

  1. 23.3%
  2. 46.7%
  3. 93.3%
  4. 35.0%
Answer and explanation

Answer: B

Acid taken = 0.0100 mol. NaOH = 0.0100 mol, which neutralises 0.0050 mol H₂SO₄. Acid used by NH₃ = 0.0050 mol, so NH₃ = 0.0100 mol and N = 0.140 g. % N = 0.140 ÷ 0.30 × 100 = 46.7%, matching urea's formula CH₄N₂O (28/60 × 100).

In a Dumas estimation, 0.25 g of a compound gives 45.0 mL of moist nitrogen at 293 K and 757.5 mm Hg. Taking the aqueous tension at 293 K as 17.5 mm Hg, what is the percentage of nitrogen?

  1. 10.2%
  2. 21.9%
  3. 16.3%
  4. 20.4%
Answer and explanation

Answer: D

Dry N₂ pressure = 757.5 − 17.5 = 740 mm Hg. Volume at STP = 45.0 × (740/760) × (273/293) = 40.8 mL. Mass of N₂ = 28 × 40.8 ÷ 22400 = 0.0510 g. % N = 0.0510 ÷ 0.25 × 100 = 20.4%. Skipping the temperature correction gives 21.9%.

Assertion (A): The sodium fusion extract is acidified with acetic acid, not sulphuric acid, before lead acetate is added in the test for sulphur. Reason (R): Lead sulphide is a black solid.

  1. Both A and R are true, and R is the correct explanation of A.
  2. Both A and R are true, but R is not the correct explanation of A.
  3. A is true, but R is false.
  4. A is false, but R is true.
Answer and explanation

Answer: B

Both are true, but R does not explain A. Acetic acid is used because sulphuric acid would precipitate white lead sulphate with lead acetate and confuse the test; the colour of PbS is not the reason.

Two miscible liquids have boiling points that differ by only about 5 K. Which method separates them?

  1. Fractional distillation
  2. Simple distillation
  3. Steam distillation
  4. Sublimation
Answer and explanation

Answer: A

Close boiling points mean both vaporise in the same temperature range, so simple distillation fails; the repeated vaporisation and condensation in a fractionating column is needed. Steam distillation needs a water-immiscible, steam-volatile compound.

On a TLC plate the solvent front is 12.0 cm from the base line. Spot P is at 3.0 cm and spot Q at 9.0 cm. Which statement is correct?

  1. Rf(P) = 0.75 and P is less strongly adsorbed
  2. Rf(Q) = 0.25 and Q is more strongly adsorbed
  3. Rf(P) = 0.25 and P is more strongly adsorbed
  4. Rf(P) = 4.0 and Rf(Q) = 1.33
Answer and explanation

Answer: C

Rf(P) = 3.0 ÷ 12.0 = 0.25 and Rf(Q) = 9.0 ÷ 12.0 = 0.75. The component held more strongly by the adsorbent moves less, so P (lower Rf) is more strongly adsorbed. Rf cannot exceed 1.

When H⁺ adds to propene, the π electrons of the C=C bond shift to the carbon to which H⁺ becomes attached. This is an example of:

  1. the +E (positive electromeric) effect
  2. the –E (negative electromeric) effect
  3. the inductive effect
  4. hyperconjugation
Answer and explanation

Answer: A

In the +E effect the π pair moves to the atom the attacking reagent attaches to. In –E it moves to the atom the reagent does not attach to, as when CN⁻ adds to a carbonyl carbon.

Assertion (A): The electromeric effect is a permanent effect present in every molecule that has a multiple bond. Reason (R): The electromeric effect is the complete transfer of a shared π-electron pair to one atom of a multiple bond when an attacking reagent approaches.

  1. Both A and R are true, and R is the correct explanation of A.
  2. Both A and R are true, but R is not the correct explanation of A.
  3. A is true, but R is false.
  4. A is false, but R is true.
Answer and explanation

Answer: D

A is false: the electromeric effect is temporary and appears only while a reagent is present, vanishing when it is removed. R is a correct description of the effect.

Which order of carbocation stability is correct?

  1. CH₃⁺ > CH₃CH₂⁺ > (CH₃)₂CH⁺ > (CH₃)₃C⁺
  2. (CH₃)₃C⁺ > (CH₃)₂CH⁺ > CH₃CH₂⁺ > CH₃⁺
  3. (CH₃)₂CH⁺ > (CH₃)₃C⁺ > CH₃CH₂⁺ > CH₃⁺
  4. CH₃CH₂⁺ > CH₃⁺ > (CH₃)₂CH⁺ > (CH₃)₃C⁺
Answer and explanation

Answer: B

More alkyl groups on the positive carbon mean more hyperconjugation (9, 6, 3 and 0 C–H bonds) and more +I donation, so 3° > 2° > 1° > methyl.

Butanal (CH₃CH₂CH₂CHO) and butanone (CH₃COCH₂CH₃) are related as:

  1. chain isomers
  2. position isomers
  3. metamers
  4. functional group isomers
Answer and explanation

Answer: D

Both are C₄H₈O, but one is an aldehyde and the other a ketone: different functional groups, so functional group isomers.

What is the IUPAC name of OHC–CH₂–CH₂–COOH?

  1. 4-Carboxybutanal
  2. 4-Oxobutanoic acid
  3. 3-Formylpropanoic acid
  4. 1-Oxobutan-4-oic acid
Answer and explanation

Answer: B

The carboxylic acid outranks the aldehyde, so it is the suffix and its carbon is C1. The chain has four carbons including the CHO carbon (C4), which is named oxo: 4-oxobutanoic acid.

What is the IUPAC name of CH₃CH(CH₃)CH₂CH(CH₂CH₃)CH₂CH₂CH₃?

  1. 4-Ethyl-6-methylheptane
  2. 2-Methyl-4-ethylheptane
  3. 4-Ethyl-2-methylheptane
  4. 2-Methyl-4-propylhexane
Answer and explanation

Answer: C

The longest chain has 7 carbons (heptane). Numbering from the left gives locants {2, 4}, from the right {4, 6}, so number from the left. Alphabetical order puts ethyl before methyl: 4-ethyl-2-methylheptane. A propylhexane name uses a shorter chain.

What is the molar mass of the fourth member of the alkyne series that begins with ethyne?

  1. 68 g mol⁻¹
  2. 54 g mol⁻¹
  3. 82 g mol⁻¹
  4. 70 g mol⁻¹
Answer and explanation

Answer: A

Alkynes are CₙH₂ₙ₋₂: C₂H₂, C₃H₄, C₄H₆, C₅H₈. C₅H₈ = 5 × 12 + 8 × 1 = 68 g mol⁻¹. 54 is the third member and 70 belongs to C₅H₁₀.

How many σ and π bonds does a benzene molecule, C₆H₆, contain?

  1. 6 σ and 3 π
  2. 9 σ and 3 π
  3. 12 σ and 6 π
  4. 12 σ and 3 π
Answer and explanation

Answer: D

Six C–C links each contain one σ bond and six C–H bonds are σ bonds: 12 σ. In one Kekulé structure three of the C–C links are double, adding 3 π.

What is the hybridisation of carbons 1, 2, 3 and 4 in buta-1,2-diene, CH₂=C=CH–CH₃?

  1. sp², sp², sp², sp³
  2. sp², sp, sp², sp³
  3. sp, sp, sp², sp³
  4. sp², sp, sp, sp³
Answer and explanation

Answer: B

C1 is bonded to three atoms (2 H and C2): sp². C2 has two double bonds and two partners: sp. C3 is bonded to three atoms: sp². C4 (CH₃) has four partners: sp³.

In a Carius estimation, 0.250 g of an organic compound gives 0.7175 g of AgCl. What is the percentage of chlorine? (Ag = 108, Cl = 35.5)

  1. 35.5%
  2. 71.0%
  3. 24.7%
  4. 49.5%
Answer and explanation

Answer: B

AgCl = 143.5 g mol⁻¹, so 0.7175 g is 0.0050 mol, containing 0.0050 × 35.5 = 0.1775 g Cl. % Cl = 0.1775 ÷ 0.250 × 100 = 71.0%.

Assertion (A): Kjeldahl's method cannot be used to estimate nitrogen in nitrobenzene. Reason (R): Nitrogen of a nitro group is not converted into ammonium sulphate on heating with concentrated sulphuric acid.

  1. Both A and R are true, and R is the correct explanation of A.
  2. Both A and R are true, but R is not the correct explanation of A.
  3. A is true, but R is false.
  4. A is false, but R is true.
Answer and explanation

Answer: A

Both statements are true, and R is the reason: Kjeldahl's method measures nitrogen only as the ammonia released from ammonium sulphate, so nitro, azo and ring nitrogen escape measurement.

In a Carius estimation, 0.20 g of an organic compound gives 0.233 g of BaSO₄. What is the percentage of sulphur? (Ba = 137, S = 32, O = 16)

  1. 32.0%
  2. 8.0%
  3. 11.7%
  4. 16.0%
Answer and explanation

Answer: D

BaSO₄ = 233 g mol⁻¹, so 0.233 g is 0.0010 mol, containing 0.032 g S. % S = 0.032 ÷ 0.20 × 100 = 16.0%.

In a Kjeldahl estimation, the ammonia from 0.40 g of a compound exactly neutralises 5.0 mL of 1.0 M H₂SO₄. What is the percentage of nitrogen? (N = 14)

  1. 17.5%
  2. 70.0%
  3. 35.0%
  4. 8.75%
Answer and explanation

Answer: C

H₂SO₄ = 5.0 × 1.0/1000 = 0.0050 mol, which reacts with 2 × 0.0050 = 0.010 mol NH₃. N = 0.010 × 14 = 0.14 g, so % N = 0.14 ÷ 0.40 × 100 = 35.0%. Forgetting the factor 2 gives 17.5%.

On complete combustion, 0.180 g of an organic compound gives 0.264 g of CO₂. What is the percentage of carbon? (C = 12, O = 16)

  1. 40.0%
  2. 26.7%
  3. 14.7%
  4. 53.3%
Answer and explanation

Answer: A

Mass of C = 12/44 × 0.264 = 0.072 g. % C = 0.072 ÷ 0.180 × 100 = 40.0%.

Privacy · Terms · Refunds · Delivery