Chapter 9 Hydrocarbons
Practice questions
What is formed when benzene reacts with chlorine in ultraviolet light, without a Lewis acid catalyst?
- Chlorobenzene
- Hexachlorobenzene, C₆Cl₆
- 1,4-Dichlorobenzene
- Benzene hexachloride, C₆H₆Cl₆
Answer and explanation
Answer: D
In UV light chlorine adds across the ring (three molecules of Cl₂), giving benzene hexachloride (gammaxane). Substitution products such as chlorobenzene need a Lewis acid such as anhydrous AlCl₃ or FeCl₃.
Arrange in order of decreasing reactivity towards an electrophile: benzene, nitrobenzene, toluene.
- Nitrobenzene > benzene > toluene
- Toluene > benzene > nitrobenzene
- Benzene > toluene > nitrobenzene
- Toluene > nitrobenzene > benzene
Answer and explanation
Answer: B
–CH₃ releases electrons and activates the ring, so toluene reacts fastest. –NO₂ withdraws electrons and deactivates the ring, so nitrobenzene reacts slowest. Benzene lies between.
How many π electrons does naphthalene (C₁₀H₈, two fused benzene rings) have, and does it fit Hückel's rule?
- 10, yes (n = 2)
- 8, no
- 12, no
- 10, no
Answer and explanation
Answer: A
Naphthalene has five C=C bonds in its Kekulé structure, so 10 π electrons. 4n + 2 = 10 gives n = 2, so it fits Hückel's rule and is aromatic (it is planar and fully delocalised).
What mass of calcium carbide (CaC₂, 64 g mol⁻¹) is needed to produce 13 g of ethyne (26 g mol⁻¹), assuming complete reaction?
- 16 g
- 64 g
- 26 g
- 32 g
Answer and explanation
Answer: D
CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂ (1 : 1). Moles of C₂H₂ = 13 ÷ 26 = 0.50 mol, so CaC₂ = 0.50 mol × 64 g mol⁻¹ = 32 g.
Ethyne is passed into water containing HgSO₄ and dilute H₂SO₄ at 333 K. The product is:
- Ethanol
- Ethanoic acid
- Ethanal
- Ethane-1,2-diol
Answer and explanation
Answer: C
One molecule of water adds to give the enol CH₂=CHOH, which changes at once into ethanal, CH₃CHO.
Which of these reacts with sodamide (NaNH₂) to release ammonia?
- But-1-yne
- But-2-yne
- But-1-ene
- Butane
Answer and explanation
Answer: A
Only a hydrogen on a triply bonded (sp) carbon is acidic enough. But-1-yne, CH₃CH₂C≡CH, has one; but-2-yne has none, and alkenes and alkanes are far less acidic.
Assertion (A): cis-But-2-ene has a higher dipole moment than trans-but-2-ene.
Reason (R): In trans-but-2-ene the two C–CH₃ bond dipoles point in opposite directions and cancel.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
cis-But-2-ene has a dipole moment of 0.33 D; in the trans isomer the bond dipoles cancel and the dipole moment is almost zero. R explains A.
What is the major product when 2-methylpropene reacts with HBr in the presence of benzoyl peroxide?
- 2-Bromo-2-methylpropane
- 1,2-Dibromo-2-methylpropane
- 1-Bromo-2-methylpropane
- 2-Methylpropan-2-ol
Answer and explanation
Answer: C
With peroxide, Br• adds first to the CH₂ end, giving the more stable tertiary radical (CH₃)₂C•–CH₂Br, which takes H from HBr: (CH₃)₂CHCH₂Br, 1-bromo-2-methylpropane (anti-Markovnikov).
An alkene C₅H₁₀ gives propanone and ethanal on ozonolysis. What is it?
- Pent-2-ene
- 2-Methylbut-2-ene
- 3-Methylbut-1-ene
- 2-Methylbut-1-ene
Answer and explanation
Answer: B
Join the carbonyl carbons of (CH₃)₂C=O and CH₃CH=O with a double bond: (CH₃)₂C=CHCH₃, 2-methylbut-2-ene. Pent-2-ene would give ethanal and propanal; the but-1-enes would give methanal.
Which statement about the conformations of ethane is correct?
- The eclipsed form is more stable than the staggered form
- The two conformers can be separated at room temperature
- Bond angles change between the staggered and eclipsed forms
- The energy difference between them is small, about 12.5 kJ mol⁻¹
Answer and explanation
Answer: D
Staggered is more stable; the barrier of about 12.5 kJ mol⁻¹ is easily crossed at room temperature, so the forms cannot be separated. Bond lengths and angles are the same in all conformations.
Arrange the following in order of increasing boiling point: hexane, 2,2-dimethylbutane, 2-methylpentane.
- Hexane < 2-methylpentane < 2,2-dimethylbutane
- 2-Methylpentane < hexane < 2,2-dimethylbutane
- 2,2-Dimethylbutane < hexane < 2-methylpentane
- 2,2-Dimethylbutane < 2-methylpentane < hexane
Answer and explanation
Answer: D
All are C₆H₁₄. More branching gives a more compact shape, less surface contact and weaker van der Waals forces. So the most branched boils lowest and straight-chain hexane highest.
What volume of oxygen is needed to burn 5.0 L of butane completely (all volumes at the same temperature and pressure)?
- 32.5 L
- 20.0 L
- 65.0 L
- 25.0 L
Answer and explanation
Answer: A
2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O, so 1 volume of butane needs 6.5 volumes of O₂. 5.0 × 6.5 = 32.5 L.
Assertion (A): Sodium butanoate on heating with soda lime gives propane.
Reason (R): Decarboxylation removes one carbon atom as CO₂ (ending up as Na₂CO₃).
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
CH₃CH₂CH₂COONa + NaOH → CH₃CH₂CH₃ + Na₂CO₃. The four-carbon salt gives a three-carbon alkane because one carbon leaves as carbonate. R explains A.
A mixture of bromomethane and bromoethane is heated with sodium in dry ether. Which alkanes are formed?
- Propane only
- Ethane, propane and butane
- Ethane and butane only
- Methane and ethane
Answer and explanation
Answer: B
Any two alkyl groups can join: CH₃ + CH₃ → ethane, CH₃ + C₂H₅ → propane, C₂H₅ + C₂H₅ → butane. This mixture is why the Wurtz reaction is not used for odd-carbon alkanes.
How many chain isomers are possible for C₆H₁₄?
- 3
- 4
- 5
- 6
Answer and explanation
Answer: C
Hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane: five in all.
Assertion (A): To make m-bromonitrobenzene from benzene, nitration should be carried out before bromination.
Reason (R): The nitro group is a meta-directing group.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Answer and explanation
Answer: A
Once –NO₂ is on the ring, it sends the incoming Br to the meta position. Brominating first would give mainly o- and p-bromonitrobenzene, because Br directs ortho/para. R explains A.
All six C–C bonds in benzene are 139 pm long. What does this show?
- Benzene has three isolated double bonds
- The π electrons are delocalised over the whole ring
- Benzene is not planar
- Benzene contains only single bonds
Answer and explanation
Answer: B
Isolated single and double bonds would give two different lengths (154 and 133 pm). One length in between means each bond is the same, which fits six π electrons spread evenly around the ring.
Which group is ortho/para directing but deactivating?
- –OH
- –NO₂
- –Cl
- –CH₃
Answer and explanation
Answer: C
Halogens withdraw electrons by the –I effect, lowering the reactivity of the ring, but their lone pairs supply electrons by resonance to the ortho and para positions. –OH and –CH₃ are activating; –NO₂ is meta directing.
What is the electrophile in the nitration of benzene?
- NO₂⁻
- NO₃⁻
- HSO₄⁻
- NO₂⁺
Answer and explanation
Answer: D
Nitric acid accepts a proton from sulphuric acid and then loses water, producing the nitronium ion NO₂⁺, the electrophile that attacks the ring.
Which species is aromatic?
- Cyclopentadiene, C₅H₆
- Cyclopentadienyl anion, C₅H₅⁻
- Cyclooctatetraene, C₈H₈
- Cyclohexene, C₆H₁₀
Answer and explanation
Answer: B
C₅H₅⁻ is planar, fully delocalised and has 6 π electrons (4n + 2 with n = 1). Cyclopentadiene has an sp³ CH₂ that breaks delocalisation, cyclooctatetraene has 8 π electrons and is not planar, and cyclohexene has only one double bond.