Chapter 1 Units and Measurement
Practice questions
A unit of energy is defined in a system where the units of mass, length and time are 10 kg, 10 m and 10 s. One new unit of energy equals:
- 100 J
- 1000 J
- 1 J
- 10 J
Answer and explanation
Answer: D
Energy is [M L² T⁻²]. One new unit = (10 kg)(10 m)²(10 s)⁻² = 10 × 100 / 100 kg m² s⁻² = 10 J.
The speed v of sound in a gas is assumed to depend on its pressure p and density ρ as v = k pᵃ ρᵇ. Dimensional analysis gives:
- v = k √(ρ/p)
- v = k √(p/ρ)
- v = k pρ
- v = k p/ρ
Answer and explanation
Answer: B
[L T⁻¹] = [M L⁻¹ T⁻²]ᵃ [M L⁻³]ᵇ. T: −2a = −1, so a = ½. M: a + b = 0, so b = −½. Check L: −a − 3b = −½ + 3/2 = 1. So v = k √(p/ρ).
Which equation is dimensionally consistent? (m: mass, v: speed, g: acceleration due to gravity, h: height, t: time)
- mv = mgh
- v = gh
- ½mv² = mgh
- v² = gt
Answer and explanation
Answer: C
[½mv²] = [M][L T⁻¹]² = [M L² T⁻²] and [mgh] = [M][L T⁻²][L] = [M L² T⁻²]. They match. In the others the sides differ: [M L T⁻¹] vs [M L² T⁻²]; [L T⁻¹] vs [L² T⁻²]; [L² T⁻²] vs [L T⁻¹].
Which statement about dimensions is correct?
- Every dimensionless quantity is a pure number with no unit
- A quantity with a unit must have dimensions
- Two quantities with the same dimensions must be the same physical quantity
- Plane angle has a unit (radian) but no dimensions
Answer and explanation
Answer: D
Plane angle = arc/radius is a ratio of lengths, so it is dimensionless, yet it has a unit, the radian. That also shows the other claims are wrong: a dimensionless quantity can have a unit, and work and torque share dimensions though they are different quantities.
Surface tension is force per unit length. Its dimensional formula is:
- [M L T⁻²]
- [M L⁻¹ T⁻²]
- [M T⁻²]
- [M L² T⁻²]
Answer and explanation
Answer: C
Surface tension = force/length = [M L T⁻²]/[L] = [M L⁰ T⁻²] = [M T⁻²].
The gravitational constant G appears in F = G m₁m₂/r². Its SI unit is:
- N m kg⁻¹
- N kg² m⁻²
- N m² kg⁻²
- kg m s⁻²
Answer and explanation
Answer: C
G = F r²/(m₁m₂), so its unit is N × m² / kg² = N m² kg⁻². Its dimensional formula is [M⁻¹ L³ T⁻²].
Assertion (A): In a multi-step calculation, intermediate results should be kept to one more significant figure than the least precise measurement. Reason (R): Rounding at every step can make rounding errors accumulate.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Answer and explanation
Answer: A
Both are true. For example 1/7.36 rounded to 0.136 gives back 7.35, but keeping 0.1359 gives back 7.36. Errors from early rounding pile up, which is why an extra digit is carried; so R explains A.
The length and breadth of a plate are 15.0 ± 0.1 cm and 4.0 ± 0.1 cm. The maximum percentage error in its area is about:
- 0.7%
- 2.5%
- 1.8%
- 3.2%
Answer and explanation
Answer: D
Relative errors add for a product: 0.1/15.0 ≈ 0.67% and 0.1/4.0 = 2.5%. Total ≈ 0.67% + 2.5% = 3.17%, about 3.2%.
A body of mass 5.74 kg occupies a volume of 1.2 m³. Its density, to correct significant figures, is:
- 4.8 kg m⁻³
- 4.78 kg m⁻³
- 4.783 kg m⁻³
- 5 kg m⁻³
Answer and explanation
Answer: A
5.74/1.2 = 4.783 kg m⁻³ by arithmetic. In division keep the fewest significant figures among the inputs: 1.2 has two, so the density is 4.8 kg m⁻³.
A length of 0.0450 km is converted to metres. Correctly written, it is:
- 45 m
- 45.0 m
- 45.00 m
- 4.5 × 10¹ m
Answer and explanation
Answer: B
0.0450 km has 3 significant figures (4, 5 and the trailing 0 after the decimal point). In metres it is 0.0450 × 1000 = 45.0 m, which keeps 3 significant figures. 45 m and 4.5 × 10¹ m show only two, and 45.00 m shows four.
The mass of a proton is about 1.67 × 10⁻²⁷ kg. Its order of magnitude is:
- 10⁻²⁶ kg
- 10⁻²⁸ kg
- 10⁻²⁷ kg
- 10⁻²⁵ kg
Answer and explanation
Answer: C
Here a = 1.67, which is less than 5, so it rounds to 1. Then 1.67 × 10⁻²⁷ ≈ 1 × 10⁻²⁷ kg, so the order of magnitude is −27.
How many significant figures does 3.0800 × 10⁻⁴ kg have?
- 3
- 4
- 6
- 5
Answer and explanation
Answer: D
In scientific notation every digit of the number before the power of ten is significant: 3, 0, 8, 0, 0. That is 5 significant figures; the exponent −4 does not count.
Assertion (A): A full circle subtends 2π radians at its centre. Reason (R): The circumference of a circle of radius r is 2πr, and angle in radians equals arc length divided by radius.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Answer and explanation
Answer: A
For a full turn the arc is the whole circumference, 2πr. Angle = arc/radius = 2πr/r = 2π rad. Both statements are true and R gives the reason for A.
A speed of 25 m s⁻¹ expressed in km h⁻¹ is:
- 90 km h⁻¹
- 6.9 km h⁻¹
- 25 km h⁻¹
- 50 km h⁻¹
Answer and explanation
Answer: A
1 m s⁻¹ = 3600 m/1000 per hour = 3.6 km h⁻¹. So 25 m s⁻¹ = 25 × 3.6 = 90 km h⁻¹ (equivalently 25 × 18/5 = 90).
The SI base unit of luminous intensity is the:
- lumen
- candela
- lux
- watt
Answer and explanation
Answer: B
Luminous intensity is one of the seven base quantities, and its SI base unit is the candela (cd). The lumen and lux are derived units, and the watt is the derived unit of power.
Assertion (A): The method of dimensions cannot tell whether kinetic energy is ½mv² or ¾mv². Reason (R): Dimensionless constants do not affect the dimensions of an expression.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Answer and explanation
Answer: A
Both ½mv² and ¾mv² have dimensions [M L² T⁻²], so dimensional analysis cannot choose between them; only the definition of kinetic energy can. That is because pure numbers have no dimensions, which is exactly what R says. Both are true and R explains A.
The value of 1 newton in dynes (CGS unit of force, g cm s⁻²), found from the dimensions [M L T⁻²], is:
- 10³
- 10⁷
- 10⁵
- 10²
Answer and explanation
Answer: C
n₂ = n₁ (M₁/M₂)¹ (L₁/L₂)¹ (T₁/T₂)⁻² = 1 × (1000 g/1 g) × (100 cm/1 cm) × 1 = 1000 × 100 = 10⁵. So 1 N = 10⁵ dyn.
The time period T of a simple pendulum is assumed to depend on its length l and on g. Dimensional analysis gives:
- T = k l g
- T = k √(l/g)
- T = k √(g/l)
- T = k l²/g
Answer and explanation
Answer: B
Let T = k lˣ gʸ. Then [T] = [L]ˣ [L T⁻²]ʸ. T: −2y = 1, so y = −½. L: x + y = 0, so x = ½. Hence T = k √(l/g). (Experiment and theory give k = 2π.)
In y = A sin(ωt), where y and A are displacements and t is time, the dimensions of ω are:
- [T⁻¹]
- [L T⁻¹]
- [T]
- dimensionless
Answer and explanation
Answer: A
The argument of a sine must be dimensionless, so ωt has no dimensions. Hence [ω] = 1/[T] = [T⁻¹].
Which equation is dimensionally INCORRECT? (v, u: speeds; a: acceleration; s: distance; t: time)
- v = u + at
- v² = u² + 2as
- s = ut + ½at²
- s = ut + at³
Answer and explanation
Answer: D
In s = ut + at³, the term at³ has dimensions [L T⁻²][T³] = [L T], not [L], so it cannot be added to a distance. Each term of the other three equations has matching dimensions: [L T⁻¹] for the first, [L² T⁻²] for the second and [L] for the third.