Chapter 11 Thermodynamics

Practice questions

An inventor claims an engine working between 500 K and 400 K with an efficiency of 30%. The claim is

  1. possible, since 30% is less than 100%
  2. possible only with a gas as working substance
  3. impossible, because the Carnot limit between these temperatures is only 20%
  4. impossible, because every engine has zero efficiency
Answer and explanation

Answer: C

The greatest possible efficiency is that of a Carnot engine: 1 − 400/500 = 0.20, or 20%. By Carnot's theorem no engine between these temperatures can reach 30%.

The sink of a Carnot engine is kept at 300 K. To raise its efficiency from 40% to 50%, the source temperature must be raised from 500 K by

  1. 50 K
  2. 200 K
  3. 150 K
  4. 100 K
Answer and explanation

Answer: D

For 50%: 0.50 = 1 − 300/T₁′, so T₁′ = 600 K. The source must go from 500 K to 600 K, an increase of 100 K.

A Carnot engine has an efficiency of 40% and its sink is at 27 °C. What is the temperature of its source?

  1. 45 °C
  2. 500 °C
  3. 227 °C
  4. 177 °C
Answer and explanation

Answer: C

T₂ = 300 K. η = 1 − T₂/T₁ gives 0.40 = 1 − 300/T₁, so T₁ = 300/0.60 = 500 K = 227 °C.

An engine does 400 J of work in each cycle and rejects 600 J of heat to its sink. Its efficiency is

  1. 67%
  2. 40%
  3. 60%
  4. 150%
Answer and explanation

Answer: B

Q₁ = W + Q₂ = 400 + 600 = 1000 J. η = W/Q₁ = 400/1000 = 0.40, that is 40%. Dividing 400 by 600 is a common mistake.

Assertion (A): Spontaneous processes in nature, such as heat flowing out of a hot pan, are irreversible. Reason (R): Real processes pass through non-equilibrium states and involve dissipative effects such as friction.

  1. Both A and R are true, and R is the correct explanation of A
  2. Both A and R are true, but R is not the correct explanation of A
  3. A is true, but R is false
  4. A is false, but R is true
Answer and explanation

Answer: A

A reversible process must be quasi-static and free of dissipation. Natural processes involve finite temperature differences, non-equilibrium states and friction, which is exactly why they cannot be reversed without leaving changes elsewhere. R explains A.

A refrigerator with a coefficient of performance of 5 removes 1000 J of heat from its cold compartment. How much heat does it release to the room?

  1. 200 J
  2. 1000 J
  3. 800 J
  4. 1200 J
Answer and explanation

Answer: D

α = Q₂/W, so W = 1000/5 = 200 J. Heat to the room Q₁ = Q₂ + W = 1000 + 200 = 1200 J.

An ideal gas in an insulated container expands freely into an evacuated chamber. Which is correct?

  1. Q = 0, W = 0 and ΔU = 0, so its temperature does not change
  2. Its temperature falls because it does work
  3. Heat is absorbed from the walls
  4. Its internal energy increases
Answer and explanation

Answer: A

The container is insulated, so Q = 0; the gas pushes against nothing, so W = 0. The first law gives ΔU = 0, and for an ideal gas this means no change of temperature. The process is irreversible.

A gas is taken round a rectangular cycle on a P-V diagram between pressures 1.0 × 10⁵ Pa and 3.0 × 10⁵ Pa and volumes 1.0 L and 3.0 L. What is the net work done per cycle (in magnitude)?

  1. 200 J
  2. 600 J
  3. 400 J
  4. 900 J
Answer and explanation

Answer: C

Net work in a cycle = area enclosed = ΔP × ΔV = (2.0 × 10⁵ Pa) × (2.0 × 10⁻³ m³) = 400 J. Since ΔU = 0 over the cycle, the net heat absorbed is also 400 J.

1.0 mol of a monatomic ideal gas (γ = 5/3) expands adiabatically and its temperature falls from 500 K to 400 K. How much work does it do?

  1. 1.25 × 10³ J
  2. 831 J
  3. 2.08 × 10³ J
  4. 554 J
Answer and explanation

Answer: A

W = μR(T₁ − T₂)/(γ − 1) = 1.0 × 8.31 × 100/(2/3) = 831 × 1.5 ≈ 1.25 × 10³ J, taken entirely from the gas's internal energy.

A heater supplies heat to a system at 150 W while the system does work at 90 J per second. At what rate does its internal energy increase?

  1. 240 W
  2. 60 W
  3. 1.67 W
  4. 90 W
Answer and explanation

Answer: B

Per second, ΔU = ΔQ − ΔW = 150 − 90 = 60 J, so the internal energy rises at 60 W.

2.0 mol of a diatomic ideal gas (Cv = 5R/2) is heated at constant pressure through 20 K. How much heat is needed?

  1. 831 J
  2. 1.66 × 10³ J
  3. 332 J
  4. 1.16 × 10³ J
Answer and explanation

Answer: D

Cp = Cv + R = 7R/2 = 3.5 × 8.31 ≈ 29.1 J mol⁻¹ K⁻¹. Q = μCpΔT = 2.0 × 29.1 × 20 ≈ 1.16 × 10³ J. Using Cv instead would give only 831 J.

Along path 1 from state A to state B a gas absorbs 600 J of heat and does 250 J of work. Along path 2 between the same states it does 100 J of work. How much heat does it absorb along path 2?

  1. 350 J
  2. 450 J
  3. 750 J
  4. 250 J
Answer and explanation

Answer: B

ΔU = Q − W = 600 − 250 = 350 J for any path. For path 2, Q = ΔU + W = 350 + 100 = 450 J.

A gas goes from state A to state B by two different paths. Which statement is true?

  1. The heat absorbed is the same for both paths
  2. The work done is the same for both paths
  3. The change in internal energy is the same for both paths
  4. Heat and work are both state variables
Answer and explanation

Answer: C

Internal energy is a state variable, so ΔU depends only on A and B. Heat and work depend on the path; only their difference Q − W is path-independent.

A 10 g lead bullet travelling at 300 m s⁻¹ stops in a target; half its kinetic energy heats the bullet. With s(lead) = 130 J kg⁻¹ K⁻¹, its temperature rises by about

  1. 35 K
  2. 17 K
  3. 346 K
  4. 173 K
Answer and explanation

Answer: D

KE = ½ × 0.010 × 300² = 450 J. Half, 225 J, heats the bullet. ΔT = 225/(0.010 × 130) = 225/1.3 ≈ 173 K.

Body A is in thermal equilibrium with body C, and body B is also in thermal equilibrium with C. What can be concluded?

  1. A and B have the same internal energy
  2. A and B are at the same temperature
  3. A and B have the same mass
  4. Nothing, unless A and B touch
Answer and explanation

Answer: B

By the zeroth law, A and B are in thermal equilibrium with each other, so they have the same temperature. Their internal energies and masses can be quite different.

According to Carnot's theorem, the efficiency of a Carnot engine

  1. depends on whether the working substance is a gas or a liquid
  2. depends only on the temperatures of the source and sink
  3. can exceed 1 for a very hot source
  4. is greatest for an irreversible engine
Answer and explanation

Answer: B

Carnot's theorem says the efficiency of a reversible engine between two temperatures is the same for any working substance, η = 1 − T₂/T₁, and that no engine can do better.

A Carnot engine absorbs 1200 J per cycle from a source at 600 K and rejects heat to a sink at 400 K. How much work does it do per cycle?

  1. 800 J
  2. 1200 J
  3. 600 J
  4. 400 J
Answer and explanation

Answer: D

Q₂/Q₁ = T₂/T₁ = 400/600, so Q₂ = 1200 × 2/3 = 800 J. W = Q₁ − Q₂ = 1200 − 800 = 400 J (efficiency 1/3).

A Carnot engine works between 127 °C and 27 °C. Its efficiency is

  1. 79%
  2. 21%
  3. 25%
  4. 75%
Answer and explanation

Answer: C

Temperatures must be in kelvin: T₁ = 400 K, T₂ = 300 K. η = 1 − 300/400 = 0.25, that is 25%. Using Celsius values (1 − 27/127) gives the wrong answer of about 79%.

The Carnot cycle consists of

  1. two isochoric and two isobaric processes
  2. two isothermal and two adiabatic processes
  3. two isothermal and two isobaric processes
  4. four adiabatic processes
Answer and explanation

Answer: B

Heat must be exchanged reversibly with the two reservoirs, which needs isothermal steps at T₁ and T₂, and the temperature must change between them without heat flow, which needs adiabatic steps.

What is the efficiency of a Carnot engine working between 600 K and 300 K?

  1. 50%
  2. 100%
  3. 33%
  4. 200%
Answer and explanation

Answer: A

η = 1 − T₂/T₁ = 1 − 300/600 = 0.50, that is 50%.

Privacy · Terms · Refunds · Delivery