Chapter 9 The Amazing World of Solutes, Solvents, and Solutions

Practice questions

Why do fish survive under a frozen lake in winter?

  1. Ice sinks and warms the water at the surface.
  2. Fish can breathe ice.
  3. Ice is less dense and floats, forming a top layer while the water below stays liquid.
  4. Lakes never freeze at all.
Answer and explanation

Answer: C

Water expands on freezing, so ice floats as a layer on top, insulating the liquid water beneath where fish live.

An unpeeled orange floats in water but the same orange peeled sinks. What is the best explanation?

  1. Peeling adds mass to the orange.
  2. The peel is denser than iron.
  3. The peel has many air pockets that lower the orange's overall density below water's.
  4. Water becomes denser when an orange is peeled.
Answer and explanation

Answer: C

The spongy peel traps air, so the whole unpeeled orange is less dense than water and floats. Without it, the fruit is denser than water and sinks.

Water in a narrow glass tube fitted into a stoppered test tube rises when the test tube is placed in hot water. What happens to the water's density?

  1. It decreases, because the same mass now occupies a larger volume.
  2. It increases, because the water gains mass.
  3. It stays the same, because density never changes.
  4. It becomes zero.
Answer and explanation

Answer: A

Heating makes the water expand (its level rises in the tube) while its mass stays the same, so density = mass ÷ volume decreases.

A bottle holds 2 litres. 500 mL of water is poured in. How much more water can it hold?

  1. 1500 mL
  2. 1500 L
  3. 2500 mL
  4. 498 mL
Answer and explanation

Answer: A

2 L = 2000 mL. Remaining space = 2000 − 500 = 1500 mL (1.5 L).

Water stands at 35 mL; a stone of mass 40 g raises it to 51 mL. What is the stone's density?

  1. 0.4 g/cm³
  2. 2.5 g/cm³
  3. 16 g/cm³
  4. 1.14 g/cm³
Answer and explanation

Answer: B

Volume = 51 − 35 = 16 cm³. Density = 40 ÷ 16 = 2.5 g/cm³. Check: 2.5 × 16 = 40.

To measure 70 mL of water most accurately in one step, which cylinder is best?

  1. A 100 mL cylinder
  2. A 50 mL cylinder
  3. A 500 mL cylinder
  4. A 10 mL cylinder
Answer and explanation

Answer: A

A 50 mL or 10 mL cylinder needs several fillings; a 500 mL one has larger divisions, so it is less accurate. A 100 mL cylinder does it in one step with small divisions.

A 1 litre bottle of oil has a mass of 900 g of oil. Which conclusion is correct?

  1. The oil's density is 9 g/mL, so it sinks.
  2. The oil's density is 900 g/mL.
  3. The oil's density equals water's.
  4. The oil's density is 0.9 g/mL, so it floats on water.
Answer and explanation

Answer: D

1 L = 1000 mL. Density = 900 ÷ 1000 = 0.9 g/mL, less than water's 1 g/mL, so the oil floats.

A substance has a density of 1.6 g/cm³. What is its relative density with respect to water?

  1. 1.6 g/cm³
  2. 1.6, with no unit
  3. 0.6
  4. 16
Answer and explanation

Answer: B

Relative density = 1.6 g/cm³ ÷ 1 g/cm³ = 1.6. The units cancel, so it has no unit.

A block of iron has a mass of 600 g and a density of 7.5 g/cm³. What is its volume?

  1. 4500 cm³
  2. 80 cm³
  3. 607.5 cm³
  4. 0.0125 cm³
Answer and explanation

Answer: B

Volume = mass ÷ density = 600 ÷ 7.5 = 80 cm³. Check: 7.5 × 80 = 600.

Which statement about temperature and solubility in water is correct?

  1. Gases dissolve more at higher temperatures.
  2. Most solids dissolve more at higher temperatures, but gases dissolve less.
  3. Temperature never affects solubility.
  4. Solids always dissolve less in hot water.
Answer and explanation

Answer: B

For most solids solubility rises with temperature; for gases such as oxygen it falls, which is why warm water holds less oxygen.

Which solution is more concentrated: 2 spoons of salt in 100 mL, or 4 spoons in 50 mL?

  1. 2 spoons in 100 mL
  2. Both are the same
  3. 4 spoons in 50 mL
  4. It cannot be compared
Answer and explanation

Answer: C

Per 100 mL, the second has 8 spoons (4 × 2) against 2 spoons in the first. So 4 spoons in 50 mL is four times as concentrated.

Which statement about saturated solutions is correct?

  1. It can still dissolve more solute at that temperature.
  2. It forms only at very high temperatures.
  3. It has less solute than an unsaturated solution of the same substance at the same temperature.
  4. No more solute can dissolve in it at that temperature.
Answer and explanation

Answer: D

A saturated solution holds the maximum solute possible at that temperature. Heating often lets it dissolve more.

In a mixture of 60 mL of water and 40 mL of alcohol, which is the solute?

  1. The water, because it is present in the larger amount
  2. Both are solvents
  3. The alcohol, because it is present in the smaller amount
  4. Neither; liquids cannot form solutions
Answer and explanation

Answer: C

In a liquid-liquid solution, the component in the smaller amount is the solute (alcohol, 40 mL); the larger amount (water, 60 mL) is the solvent.

Seawater, sawdust in water and vinegar: which are solutions?

  1. Sawdust in water only
  2. All three
  3. None of them
  4. Seawater and vinegar only
Answer and explanation

Answer: D

Seawater (salt in water) and vinegar (acetic acid in water) are uniform. Sawdust floats as visible bits, so it is a non-uniform mixture.

Which statement is correct?

  1. A mixture of gases such as air is uniform and can be thought of as a solution.
  2. A mixture of sand and water is a solution.
  3. In sugar syrup, sugar is the solvent because there is more of it.
  4. A solution always has visible particles.
Answer and explanation

Answer: A

Air's gases are evenly mixed, so it is uniform. Sand in water is non-uniform; in a solid-liquid solution the liquid is always the solvent; and a solution's particles cannot be seen.

A 90 g lump of clay with a volume of 45 cm³ is rolled into a long thin rope. What is the density of the rope?

  1. 2 g/cm³, the same as before
  2. 4 g/cm³
  3. 1 g/cm³
  4. 0.5 g/cm³
Answer and explanation

Answer: A

Density = 90 ÷ 45 = 2 g/cm³. Changing shape does not change mass or volume, so the density stays 2 g/cm³.

A raw egg sinks in tap water. What change would make it float?

  1. Add more tap water.
  2. Cool the egg in a refrigerator.
  3. Use a taller glass.
  4. Dissolve a lot of salt in the water.
Answer and explanation

Answer: D

Salt raises the density of the water. When the salt water is denser than the egg, the egg floats.

Why does ice float on water?

  1. Ice is denser than water.
  2. Ice contains air bubbles only because of dust.
  3. Water expands on freezing, so ice is less dense than liquid water.
  4. Ice is a different substance from water.
Answer and explanation

Answer: C

Freezing water arranges its particles to take up more space; ice has the same mass in a larger volume, so it is less dense and floats.

On which state of matter does pressure have the greatest effect on density?

  1. Solid
  2. Gas
  3. Liquid
  4. It affects all equally
Answer and explanation

Answer: B

Gas particles are far apart, so pressure can push them much closer, increasing density a lot. Liquids and solids hardly compress.

Why does heating usually decrease the density of a substance?

  1. Its mass increases while its volume stays the same.
  2. Heating destroys some particles.
  3. Heating makes particles smaller.
  4. Its volume increases while its mass stays the same.
Answer and explanation

Answer: D

Heated particles move apart, so the same mass occupies more volume. Density = mass ÷ volume therefore decreases.

Privacy · Terms · Refunds · Delivery