Chemistry in Daily Life
Practice questions
Roughly what volume of air is needed (at 273 K, 1 atm) to supply 5 mol of O2, if air is about 21 per cent oxygen by volume?
- 112 L
- 233 L
- 533 L
- 1000 L
Answer and explanation
Answer: C
5 / 0.21 = 23.8 mol of air, and 23.8 x 22.4 = about 533 L.
If a stove transfers only 40 per cent of the heat to the pot, and 400 kJ must reach the pot, how much heat must the fuel supply?
- 160 kJ
- 400 kJ
- 600 kJ
- 1000 kJ
Answer and explanation
Answer: D
Heat supplied = 400 / 0.40 = 1000 kJ.
How many moles of O2 are needed to burn 2 mol of methane completely?
- 2
- 6
- 4
- 8
Answer and explanation
Answer: C
CH4 + 2O2 gives CO2 + 2H2O, so 2 mol of methane needs 4 mol of O2.
How much CO2 forms from burning 1 kg of propane completely, using C3H8 + 5O2 giving 3CO2 + 4H2O?
- 1.0 kg
- 2.0 kg
- 4.0 kg
- 3.0 kg
Answer and explanation
Answer: D
44 g of propane gives 132 g of CO2, so 1 kg gives 3.0 kg.
How much heat is needed to raise 10 kg of water by 80 degrees C (c = 4.18 J/g/degree)?
- 3344 kJ
- 334.4 kJ
- 41.8 kJ
- 33,440 kJ
Answer and explanation
Answer: A
q = 10,000 x 4.18 x 80 = 3,344,000 J = 3344 kJ.
How much CO2 is released when 8.4 g of NaHCO3 reacts with excess HCl (CO2 = 44 g/mol)?
- 2.2 g
- 8.8 g
- 0.44 g
- 4.4 g
Answer and explanation
Answer: D
The ratio is 1 : 1, so 0.10 mol of NaHCO3 gives 0.10 mol of CO2 = 4.4 g.
What mass of plaster of Paris (CaSO4.1/2H2O, 145 g/mol) is formed from 172 g of gypsum?
- 145 g
- 172 g
- 136 g
- 90 g
Answer and explanation
Answer: A
One mole of gypsum (172 g) gives one mole of plaster of Paris (145 g).
What is the percentage of water in Na2CO3.10H2O (molar mass 286 g/mol)?
- 37.1
- 18.0
- 62.9
- 50.0
Answer and explanation
Answer: C
The water is 10 x 18 = 180 g in 286 g, so 180 / 286 x 100 = 62.9 per cent.
What is formed when gypsum is heated gently?
- Quicklime powder
- Slaked lime paste
- Washing soda crystals
- Plaster of Paris
Answer and explanation
Answer: D
Gypsum loses 1 1/2 water molecules to form plaster of Paris, CaSO4.1/2H2O.
What is the formula of washing soda?
- Na2CO3
- Na2CO3.10H2O
- NaHCO3.10H2O
- NaOH.10H2O
Answer and explanation
Answer: B
Washing soda is sodium carbonate decahydrate. NaHCO3 is baking soda.
How many millilitres of a 10 per cent concentrate are needed to make 5 L of a 0.5 per cent spray?
- 250 mL
- 50 mL
- 500 mL
- 25 mL
Answer and explanation
Answer: A
C1V1 = C2V2 gives V1 = 0.5 x 5 / 10 = 0.25 L = 250 mL.
Which nutrients are supplied by diammonium phosphate, (NH4)2HPO4?
- Nitrogen and potassium
- Nitrogen and phosphorus
- Phosphorus and potassium
- Only phosphorus
Answer and explanation
Answer: B
The formula contains N in NH4+ and P in HPO4 2-, so it supplies nitrogen and phosphorus.
How much urea contains 56 kg of nitrogen?
- 56 kg
- 240 kg
- 120 kg
- 28 kg
Answer and explanation
Answer: C
Mass of urea = 56 x 60/28 = 120 kg.
Which of these common nitrogen fertilisers has the highest percentage of nitrogen?
- Ammonium sulphate
- Ammonium nitrate
- Urea
- Potassium nitrate
Answer and explanation
Answer: C
Urea has 46.7 per cent, ammonium nitrate 35.0, ammonium sulphate 21.2 and potassium nitrate 13.9.
What is the percentage of nitrogen in potassium nitrate, KNO3 (molar mass 101 g/mol)?
- 13.9
- 27.7
- 46.7
- 35.0
Answer and explanation
Answer: A
There is one nitrogen atom (14), so 14 / 101 x 100 = 13.9 per cent.
Which of these is a thermosetting plastic?
- Polythene
- PVC
- Polystyrene
- Bakelite
Answer and explanation
Answer: D
Bakelite sets permanently because of cross-links, so it cannot be re-moulded. The other three are thermoplastics.
How much ethene is needed to make 14 kg of polythene at 80 per cent yield?
- 11.2 kg
- 17.5 kg
- 14 kg
- 28 kg
Answer and explanation
Answer: B
The theoretical mass is 14 kg, and 14 / 0.80 = 17.5 kg.
A PTFE sample has molar mass 500,000 g/mol, and the monomer has molar mass 100 g/mol. What is the degree of polymerisation?
- 500
- 50,000
- 5000
- 1000
Answer and explanation
Answer: C
n = 500,000 / 100 = 5000.
Buna-S is a copolymer of which two monomers?
- Buta-1,3-diene and styrene
- Ethene and propene
- Phenol and formaldehyde
- Isoprene and sulphur
Answer and explanation
Answer: A
Buna-S is made by addition copolymerisation of buta-1,3-diene and styrene.
What is the monomer of Teflon?
- Vinyl chloride
- Styrene
- Propene
- Tetrafluoroethene
Answer and explanation
Answer: D
Teflon is poly(tetrafluoroethene), made from CF2=CF2.