Metals and Non-metals
Practice questions
Which of these conducts electricity in the solid state?
- Solid sodium chloride
- Diamond
- Solid sugar
- Graphite
Answer and explanation
Answer: D
Graphite has free electrons between its layers. NaCl has fixed ions, and diamond and sugar have no mobile charge carriers.
How much pure gold is there in a 24 g object made of 22 carat gold?
- 20 g
- 18 g
- 22 g
- 24 g
Answer and explanation
Answer: C
22 ÷ 24 × 24 = 22 g.
Why does a zinc coating protect iron even after the coating is scratched?
- Zinc is more reactive and corrodes first
- Zinc is less reactive and stays bright
- Zinc conducts heat better than iron
- Zinc melts and refills the scratch
Answer and explanation
Answer: A
Zinc is higher in the reactivity series, so it corrodes in preference to iron and protects it.
What percentage of gold is present in 18 carat gold?
- 18%
- 60%
- 90%
- 75%
Answer and explanation
Answer: D
18 ÷ 24 × 100 = 75%.
Aluminium does not corrode quickly in air mainly because
- it is below hydrogen in the series
- it forms a thin protective oxide layer
- it has no reaction with oxygen
- it is covered with a layer of rust
Answer and explanation
Answer: B
Aluminium reacts with oxygen to form a thin, tight oxide film that stops further attack.
How many moles of CO are needed to reduce 1 mol of Fe₂O₃ in Fe₂O₃ + 3CO → 2Fe + 3CO₂?
- 1
- 2
- 4
- 3
Answer and explanation
Answer: D
The coefficient ratio is 1 : 3, so 3 mol of CO are needed for each mole of Fe₂O₃.
Theoretically 560 kg of iron should form but 420 kg is obtained. What is the percentage yield?
- 75%
- 80%
- 90%
- 65%
Answer and explanation
Answer: A
420 ÷ 560 × 100 = 75%.
An ore is 80% Fe₂O₃. What mass of iron can 1000 kg of the ore give (Fe = 56, O = 16)?
- 700 kg
- 800 kg
- 560 kg
- 448 kg
Answer and explanation
Answer: C
Pure Fe₂O₃ = 800 kg, and 70% of that is iron = 560 kg.
What mass of iron can 200 kg of pure Fe₂O₃ give (Fe = 56, O = 16)?
- 112 kg
- 140 kg
- 160 kg
- 100 kg
Answer and explanation
Answer: B
200 × 112 ÷ 160 = 140 kg. This also equals 70% of 200 kg.
What is the percentage of iron in Fe₂O₃ (Fe = 56, O = 16)?
- 60%
- 70%
- 80%
- 30%
Answer and explanation
Answer: B
The two iron atoms weigh 112 out of 160, which is 70%.
Which statement about carbon monoxide is correct?
- It is an acidic oxide
- It is a basic oxide
- It is an amphoteric oxide
- It is a neutral oxide
Answer and explanation
Answer: D
CO does not react with acids or alkalis under ordinary conditions, so it is classed as neutral.
What mass of NaOH reacts with 0.1 mol of Al₂O₃ in Al₂O₃ + 2NaOH → 2NaAlO₂ + H₂O (Na = 23, O = 16, H = 1)?
- 4 g
- 8 g
- 16 g
- 40 g
Answer and explanation
Answer: B
0.1 mol of Al₂O₃ needs 0.2 mol of NaOH. Molar mass of NaOH = 40 g/mol, so the mass is 0.2 × 40 = 8 g.
What volume of CO₂ at STP forms on strongly heating 50 g of CaCO₃ (Ca = 40, C = 12, O = 16)?
- 22.4 L
- 5.6 L
- 44.8 L
- 11.2 L
Answer and explanation
Answer: D
50 g is 0.5 mol of CaCO₃, which gives 0.5 mol of CO₂ = 0.5 × 22.4 = 11.2 L.
Which oxide reacts with both hydrochloric acid and sodium hydroxide solution?
- Aluminium oxide
- Calcium oxide
- Copper(II) oxide
- Magnesium oxide
Answer and explanation
Answer: A
Al₂O₃ is amphoteric. CaO, CuO and MgO are basic and react only with acids.
What are the products of strongly heating zinc carbonate?
- Zinc hydroxide and water
- Zinc oxide and hydrogen
- Zinc oxide and carbon dioxide
- Zinc and carbon monoxide
Answer and explanation
Answer: C
ZnCO₃ → ZnO + CO₂, as for other metal carbonates of this kind.
What mass of silver forms when 0.1 mol of copper reacts with excess AgNO₃ solution (Ag = 108)?
- 10.8 g
- 6.35 g
- 43.2 g
- 21.6 g
Answer and explanation
Answer: D
Cu + 2AgNO₃ → Cu(NO₃)₂ + 2Ag. 0.1 mol of Cu gives 0.2 mol of Ag = 0.2 × 108 = 21.6 g.
In which vessel can copper sulphate solution be stored safely?
- Zinc
- Iron
- Silver
- Aluminium
Answer and explanation
Answer: C
Silver is less reactive than copper, so it cannot displace it. Zinc, iron and aluminium are more reactive and would be attacked.
P displaces Q, Q displaces R and S displaces P. What is the order of decreasing reactivity?
- P > Q > R > S
- R > Q > P > S
- S > R > Q > P
- S > P > Q > R
Answer and explanation
Answer: D
S > P, P > Q and Q > R chain into S > P > Q > R.
Sodium is added to copper sulphate solution. What is observed?
- Reddish-brown copper metal is deposited
- Hydrogen gas and a blue precipitate form
- Only a clear colourless solution forms
- Copper and hydrogen are both released
Answer and explanation
Answer: B
Sodium reacts with water first to give NaOH and hydrogen. NaOH then precipitates blue copper hydroxide.
A zinc plate is placed in copper sulphate solution until 0.1 mol of zinc has dissolved (Zn = 65, Cu = 63.5). The mass of the plate
- decreases by 0.15 g
- increases by 0.15 g
- increases by 6.35 g
- stays exactly the same
Answer and explanation
Answer: A
Zinc lost = 6.5 g and copper deposited = 6.35 g, so the plate loses 6.5 − 6.35 = 0.15 g.