Solutions

Practice questions

A 0.010 m aqueous solution of a cobalt(III) ammine chloride freezes with ΔTf = 0.0744 K (Kf = 1.86 K kg/mol). The compound is:

  1. [Co(NH3)3Cl3]
  2. [Co(NH3)4Cl2]Cl
  3. [Co(NH3)5Cl]Cl2
  4. [Co(NH3)6]Cl3
Answer and explanation

Answer: D

i = 0.0744 ÷ 0.0186 = 4, so four ions form: the complex ion and three free chloride ions, as in [Co(NH3)6]Cl3.

NaCl (58.5 g/mol) is 90% dissociated into Na+ and Cl−. The apparent molar mass from a colligative measurement is about:

  1. 30.8 g/mol
  2. 58.5 g/mol
  3. 29.25 g/mol
  4. 61.6 g/mol
Answer and explanation

Answer: A

i = 1 + 0.9 = 1.9, so apparent molar mass = 58.5 ÷ 1.9 = 30.8 g/mol.

The osmotic pressure of a 0.1 M K2SO4 solution that is 80% dissociated at 300 K (R = 0.0821 L atm/K mol) is about:

  1. 2.46 atm
  2. 7.39 atm
  3. 4.43 atm
  4. 6.40 atm
Answer and explanation

Answer: D

i = 1 + 2 × 0.8 = 2.6; π = 2.6 × 0.1 × 0.0821 × 300 = 6.40 atm.

Benzoic acid (122 g/mol) in benzene shows an apparent molar mass of 200 g/mol. Assuming dimerisation, the fraction of molecules associated is about:

  1. 0.39
  2. 0.61
  3. 0.78
  4. 0.50
Answer and explanation

Answer: C

i = 122 ÷ 200 = 0.61 = 1 − α/2, so α = 2 × 0.39 = 0.78.

A 0.2 m solution of a weak acid HA freezes with ΔTf = 0.465 K (Kf = 1.86 K kg/mol). The degree of dissociation is:

  1. 0.10
  2. 0.25
  3. 0.50
  4. 0.75
Answer and explanation

Answer: B

i = 0.465 ÷ 0.372 = 1.25. With n = 2, i = 1 + α, so α = 0.25.

Which statement about 0.1 m aqueous solutions is correct?

  1. Acetic acid freezes at a lower temperature than NaCl
  2. Acetic acid freezes lower than glucose but higher than NaCl
  3. Acetic acid freezes at the same temperature as glucose
  4. Acetic acid freezes higher than glucose
Answer and explanation

Answer: B

Acetic acid is a weak electrolyte; its i is slightly above 1, so it lowers the freezing point a little more than glucose (i = 1) and much less than NaCl (i = 2).

A 0.10 m aqueous solution shows ΔTf = 0.558 K (Kf = 1.86 K kg/mol). The solute could be:

  1. Glucose
  2. NaCl
  3. K2SO4
  4. Al2(SO4)3
Answer and explanation

Answer: C

i = 0.558 ÷ 0.186 = 3.0, which matches a salt giving three ions, such as K2SO4.

Which solution is isotonic with 0.06 M Al2(SO4)3 (complete dissociation)?

  1. 0.1 M NaCl
  2. 0.1 M glucose
  3. 0.2 M NaCl
  4. 0.1 M CaCl2
Answer and explanation

Answer: D

0.06 M Al2(SO4)3 has effective value 0.30, as does 0.1 M CaCl2 (3 × 0.1). The others give 0.2, 0.1 and 0.4.

Among the same four solutions, which has the highest vapour pressure?

  1. 0.10 m glucose
  2. 0.07 m NaCl
  3. 0.05 m K2SO4
  4. 0.04 m AlCl3
Answer and explanation

Answer: A

Vapour pressure is lowered most by the solution with the most particles. Glucose has the fewest (0.10), so its vapour pressure is the highest.

Which solution has the highest boiling point: 0.10 m glucose, 0.07 m NaCl, 0.05 m K2SO4 or 0.04 m AlCl3 (all strong electrolytes fully dissociated)?

  1. 0.10 m glucose
  2. 0.07 m NaCl
  3. 0.05 m K2SO4
  4. 0.04 m AlCl3
Answer and explanation

Answer: D

Effective values: 0.10, 0.14, 0.15 and 0.16. AlCl3 (i = 4) gives 0.16, the highest.

0.585 g of NaCl in 100 g of water gives a freezing-point depression of 0.372 K. If the dissociation is ignored, the molar mass calculated is 29.25 g/mol. The van't Hoff factor is:

  1. 0.5
  2. 1
  3. 2
  4. 4
Answer and explanation

Answer: C

True molar mass ÷ apparent molar mass = 58.5 ÷ 29.25 = 2, so each formula unit gives two particles.

0.5 g of a protein in 100 mL of solution gives π = 2.463 × 10^−3 atm at 300 K. The molar mass is about:

  1. 5,000 g/mol
  2. 500,000 g/mol
  3. 50,000 g/mol
  4. 50 g/mol
Answer and explanation

Answer: C

C = 2.463 × 10^−3 ÷ 24.63 = 1.0 × 10^−4 M; moles in 0.100 L = 1.0 × 10^−5 mol; M = 0.5 ÷ 1.0 × 10^−5 = 50,000 g/mol.

1.0 g of a solute in 50 g of benzene lowers the freezing point by 0.512 K (Kf of benzene = 5.12 K kg/mol). The molar mass is:

  1. 100 g/mol
  2. 400 g/mol
  3. 50 g/mol
  4. 200 g/mol
Answer and explanation

Answer: D

m = 0.512 ÷ 5.12 = 0.10; n = 0.10 × 0.050 = 0.0050 mol; M = 1.0 ÷ 0.0050 = 200 g/mol.

9 g of a non-electrolyte in 100 g of water raises the boiling point by 0.26 K (Kb = 0.52 K kg/mol). The molar mass is:

  1. 180 g/mol
  2. 90 g/mol
  3. 18 g/mol
  4. 360 g/mol
Answer and explanation

Answer: A

Molality = 0.50; moles = 0.50 × 0.100 = 0.050 mol; M = 9 ÷ 0.050 = 180 g/mol.

6 g of a non-volatile solute in 90 g of water lowers the vapour pressure of water from 51 mm Hg to 50 mm Hg. Its molar mass is:

  1. 30 g/mol
  2. 90 g/mol
  3. 120 g/mol
  4. 60 g/mol
Answer and explanation

Answer: D

(p° − p) ÷ p = n_B ÷ n_A: 1/50 = n_B/5, so n_B = 0.10 mol and M = 6 ÷ 0.10 = 60 g/mol.

10 mL of 1.0 M solution is made up to 100 mL; then 10 mL of this is again made up to 100 mL. The final molarity is:

  1. 0.10 M
  2. 0.20 M
  3. 0.001 M
  4. 0.010 M
Answer and explanation

Answer: D

Each step dilutes by a factor of 10, so the total factor is 100 and M = 1.0 ÷ 100 = 0.010 M.

What mass of 20% solution must be mixed with a 5% solution to obtain 600 g of a 10% solution?

  1. 200 g
  2. 400 g
  3. 300 g
  4. 100 g
Answer and explanation

Answer: A

Cross method: strong : weak = (10 − 5) : (20 − 10) = 1 : 2, so the 20% solution is 600 ÷ 3 = 200 g.

150 mL of 0.4 M solution is mixed with 350 mL of 0.2 M solution of the same solute (volumes additive). The final molarity is:

  1. 0.30 M
  2. 0.26 M
  3. 0.60 M
  4. 0.13 M
Answer and explanation

Answer: B

Moles = 0.060 + 0.070 = 0.130 mol; volume = 0.500 L; M = 0.26 M. The plain average 0.30 M ignores the different volumes.

A stock solution is 12 M. What volume of stock is needed to prepare 250 mL of 0.6 M solution?

  1. 25 mL
  2. 5.0 mL
  3. 125 mL
  4. 12.5 mL
Answer and explanation

Answer: D

V1 = M2V2 ÷ M1 = 0.6 × 250 ÷ 12 = 12.5 mL.

What mass of NaOH (40 g/mol) is needed to prepare 250 mL of 0.2 M solution?

  1. 8.0 g
  2. 2.0 g
  3. 0.50 g
  4. 20 g
Answer and explanation

Answer: B

Moles = 0.2 × 0.250 = 0.050 mol; mass = 0.050 × 40 = 2.0 g. Using 1 L would give the trap value 8.0 g.

Privacy · Terms · Refunds · Delivery