States of Matter
Practice questions
Which is true during the melting of a pure solid at its melting point?
- The temperature stays constant while heat is absorbed
- The temperature keeps rising steadily as heat is absorbed
- The solid gives out heat to its surroundings as it melts
- The particles of the solid stop moving completely
Answer and explanation
Answer: A
The heat is used as latent heat to loosen the arrangement of particles, so the temperature of the pure substance stays constant until melting is complete.
3 L of gas at 27 °C and 1 atm is heated to 127 °C and compressed to 2 atm. The final volume is:
- 4.0 L
- 1.5 L
- 2.0 L
- 2.7 L
Answer and explanation
Answer: C
V2 = 3 × (1 ÷ 2) × (400 ÷ 300) = 2.0 L.
A: Ice floats on water. R: The density of ice is greater than that of water. Choose the outcome.
- Both true, and R explains A
- Both true, but R does not explain A
- A true, R false
- A false, R true
Answer and explanation
Answer: C
Ice floats because its density is lower than water's (open hydrogen-bonded pattern), so R is false.
A: Water boils at a lower temperature on a mountain top. R: Atmospheric pressure is lower at high altitude. Choose the outcome.
- Both true, and R explains A
- Both true, but R does not explain A
- A true, R false
- A false, R true
Answer and explanation
Answer: A
A liquid boils when its vapour pressure equals the external pressure. Lower pressure on a mountain means a lower boiling point, so R explains A.
Which statement is correct?
- 22.4 L is the molar volume of any gas at any temperature
- At one temperature, all ideal gases have equal molar kinetic energy
- Charles's law works with temperatures in degrees Celsius
- Evaporation happens only at the boiling point of a liquid
Answer and explanation
Answer: B
Molar kinetic energy is (3/2)RT. The others are false: 22.4 L applies at STP, Charles's law needs kelvin, and evaporation occurs at any temperature.
Ethanol boils at a higher temperature than dimethyl ether although both have the formula C2H6O. The reason is:
- Ethanol has a larger molar mass
- Ethanol has hydrogen bonding between its molecules
- Dimethyl ether has stronger London forces
- Dimethyl ether is ionic
Answer and explanation
Answer: B
The two are isomers with the same molar mass. Ethanol has an –OH group that forms hydrogen bonds; dimethyl ether cannot.
When a glass capillary tube is dipped into mercury, the mercury level inside the tube is:
- Higher than outside
- The same as outside
- Depressed below the outside level
- Not affected, as mercury is a metal
Answer and explanation
Answer: C
Mercury's cohesion exceeds its adhesion to glass, so the surface is convex and the level in the capillary is lower than outside.
A capillary tube of radius 0.4 mm gives a rise of 3.0 cm for water. A tube of radius 0.1 mm gives a rise of:
- 6 cm
- 12 cm
- 0.75 cm
- 1.5 cm
Answer and explanation
Answer: B
Rise is inversely proportional to the radius. The radius is a quarter, so the rise is four times: 12 cm.
At room temperature which liquid has the highest vapour pressure?
- Diethyl ether
- Ethanol (an alcohol)
- Water (hydrogen-bonded)
- Glycerol (very viscous)
Answer and explanation
Answer: A
Diethyl ether has the weakest intermolecular forces of the four, so it evaporates most easily.
Which hydride has the highest boiling point?
- H2S
- H2Se
- H2Te
- H2O
Answer and explanation
Answer: D
Water is hydrogen-bonded, which outweighs the increase in London forces from H2S to H2Te.
A gas X diffuses 3 times more slowly than hydrogen (2 g/mol) at the same temperature and pressure. Its molar mass is:
- 6 g/mol
- 9 g/mol
- 18 g/mol
- 54 g/mol
Answer and explanation
Answer: C
r(H2) ÷ r(X) = 3 = √(M ÷ 2), so M = 2 × 9 = 18 g/mol.
NH3 (17 g/mol) and HCl (36.5 g/mol) enter a 100 cm tube from opposite ends. The ring of NH4Cl forms about how far from the NH3 end?
- 41 cm
- 50 cm
- 68 cm
- 59 cm
Answer and explanation
Answer: D
x(NH3) ÷ x(HCl) = 1.465, so x(NH3) = 100 × 1.465 ÷ 2.465 = 59.4 cm.
In equal times, 60 mL of gas X (16 g/mol) and 40 mL of gas Y effuse. The molar mass of Y is:
- 24 g/mol
- 10.7 g/mol
- 36 g/mol
- 64 g/mol
Answer and explanation
Answer: C
r_X ÷ r_Y = 1.5 = √(M_Y ÷ 16), so M_Y = 16 × 2.25 = 36 g/mol.
A gas takes 30 s for a given volume to effuse, and the same volume of oxygen (32 g/mol) takes 20 s. The molar mass of the gas is:
- 72 g/mol
- 48 g/mol
- 144 g/mol
- 21 g/mol
Answer and explanation
Answer: A
t ∝ √M: 30 ÷ 20 = 1.5 = √(M ÷ 32), so M = 32 × 2.25 = 72 g/mol.
How many times faster does He (4 g/mol) effuse than SO2 (64 g/mol) under the same conditions?
- 16
- 2
- 4
- 8
Answer and explanation
Answer: C
Ratio = √(64 ÷ 4) = √16 = 4.
A gas at 27 °C and 2 atm in a closed rigid vessel is heated to 87 °C. The final pressure is:
- 2.4 atm
- 2.0 atm
- 6.5 atm
- 1.7 atm
Answer and explanation
Answer: A
Volume and amount are fixed, so P ∝ T: P2 = 2 × 360 ÷ 300 = 2.4 atm.
A 4.926 L cylinder of oxygen (32 g/mol) at 300 K falls from 5 atm to 3 atm after use. The mass of oxygen used is:
- 12.8 g
- 19.2 g
- 32 g
- 6.4 g
Answer and explanation
Answer: A
Moles at 5 atm = 1.0 and at 3 atm = 0.6, so 0.4 mol = 12.8 g were used.
A 5 L cylinder holds gas at 12 atm. How many 1 L balloons can be filled to 1 atm at the same temperature, assuming the cylinder is emptied down to 1 atm?
- 60
- 55
- 12
- 65
Answer and explanation
Answer: B
Total gas at 1 atm = 5 × 12 = 60 L; the cylinder keeps 5 L at 1 atm, so 55 L are usable: 55 balloons.
A rigid vessel open to the air is heated from 300 K to 600 K at constant pressure. The fraction of the original gas that escapes is:
- 1/4
- 1/3
- 2/3
- 1/2
Answer and explanation
Answer: D
Moles remaining = 300 ÷ 600 = 1/2, so half of the gas escapes.
Flask A (4.0 L, 2.0 atm) is connected to flask B (6.0 L, 3.0 atm) containing the same gas at the same temperature. The final pressure is:
- 2.5 atm
- 2.6 atm
- 2.4 atm
- 5.0 atm
Answer and explanation
Answer: B
Total PV = 4 × 2 + 6 × 3 = 8 + 18 = 26 L atm; volume = 10 L; P = 2.6 atm.