Water Chemistry

Practice questions

An effluent has COD 160 mg/L and BOD 120 mg/L. The BOD/COD ratio is:

  1. 0.75
  2. 1.33
  3. 0.25
  4. 0.50
Answer and explanation

Answer: A

120 ÷ 160 = 0.75, which means that most of the organic matter is biodegradable. The ratio cannot exceed 1.

The volume of 0.01 M EDTA needed by 50 mL of the same water (200 ppm) is:

  1. 5 mL
  2. 20 mL
  3. 2 mL
  4. 10 mL
Answer and explanation

Answer: D

Hardness in 50 mL = 10 mg CaCO3 = 0.10 mmol; EDTA volume = 0.10 ÷ 0.01 = 10 mL.

5000 L of the water (200 ppm total hardness) is softened by sodium zeolite. The salt needed to regenerate the bed is:

  1. 1.00 kg
  2. 1.17 kg
  3. 2.34 kg
  4. 0.585 kg
Answer and explanation

Answer: B

Hardness removed = 200 × 5000 = 1,000,000 mg = 1.0 kg as CaCO3; NaCl = 1.0 × 117 ÷ 100 = 1.17 kg.

For the same water, the pure soda needed per litre is:

  1. 53 mg
  2. 159 mg
  3. 106 mg
  4. 212 mg
Answer and explanation

Answer: C

Soda = 1.06 × (50 + 50) = 106 mg per litre.

For the water analysed above (temporary Ca 50, temporary Mg 50, permanent Ca 50, permanent Mg 50 ppm), the pure lime needed per litre is:

  1. 148 mg
  2. 74 mg
  3. 111 mg
  4. 200 mg
Answer and explanation

Answer: A

Lime = 0.74 × (50 + 2 × 50 + 50) = 0.74 × 200 = 148 mg per litre.

A water has total hardness 120 ppm and alkalinity 200 ppm (all HCO3−). Its non-carbonate hardness is:

  1. 0 ppm
  2. 80 ppm
  3. 120 ppm
  4. 200 ppm
Answer and explanation

Answer: A

Alkalinity exceeds hardness, so all of the hardness is carbonate hardness and the non-carbonate hardness is zero.

A 100 mL sample needs 5.0 mL of 0.02 N HCl to the phenolphthalein end point. P in ppm of CaCO3 is:

  1. 25 ppm
  2. 50 ppm
  3. 100 ppm
  4. 10 ppm
Answer and explanation

Answer: B

P = 5.0 × 0.02 × 50 × 1000 ÷ 100 = 50 ppm.

P = 90 ppm and M = 120 ppm. The hydroxide alkalinity is:

  1. 30 ppm
  2. 90 ppm
  3. 60 ppm
  4. 120 ppm
Answer and explanation

Answer: C

P > M/2, so OH− = 2P − M = 180 − 120 = 60 ppm.

P = 40 ppm and M = 200 ppm. The hydrogencarbonate alkalinity is:

  1. 160 ppm
  2. 120 ppm
  3. 80 ppm
  4. 40 ppm
Answer and explanation

Answer: B

P < M/2, so HCO3− = M − 2P = 200 − 80 = 120 ppm (and CO3 2− = 80 ppm).

A sample gives P = 0 and M = 160 ppm. The alkalinity is due to:

  1. Hydroxide only
  2. Carbonate only
  3. Hydrogencarbonate only
  4. Hydroxide and carbonate
Answer and explanation

Answer: C

With P = 0 there is no hydroxide or carbonate, so the whole alkalinity is hydrogencarbonate.

74 g of pure lime removes temporary calcium hardness equal to 100 g of CaCO3. In 500 L of water this corresponds to a hardness of:

  1. 50 ppm
  2. 100 ppm
  3. 400 ppm
  4. 200 ppm
Answer and explanation

Answer: D

100 g = 100,000 mg; 100,000 mg ÷ 500 L = 200 mg/L = 200 ppm.

At illustrative prices of ₹8 per kg of lime and ₹40 per kg of soda, 2.0 kg of lime and 1.0 kg of soda cost:

  1. ₹48
  2. ₹56
  3. ₹66
  4. ₹80
Answer and explanation

Answer: B

Lime 2.0 × 8 = ₹16; soda 1.0 × 40 = ₹40; total ₹56.

A calculation gives 2.072 kg of pure lime. The lime available is 80% pure. The mass to be used is:

  1. 1.66 kg
  2. 2.59 kg
  3. 2.07 kg
  4. 3.20 kg
Answer and explanation

Answer: B

Mass = 2.072 ÷ 0.80 = 2.59 kg.

Water has permanent Ca 30 ppm and permanent Mg 20 ppm. The pure soda needed per litre is:

  1. 53 mg
  2. 74 mg
  3. 37 mg
  4. 106 mg
Answer and explanation

Answer: A

Soda = 1.06 × (30 + 20) = 53 mg per litre.

Water has temporary Ca 40 ppm and temporary Mg 20 ppm and no other hardness. The pure lime needed per litre is:

  1. 29.6 mg
  2. 44.4 mg
  3. 59.2 mg
  4. 74.0 mg
Answer and explanation

Answer: C

Lime = 0.74 × (40 + 2 × 20) = 0.74 × 80 = 59.2 mg per litre.

10,000 L of 60 ppm water is made by blending fully softened water with raw water of 300 ppm. The volume of softened water needed is:

  1. 2000 L
  2. 5000 L
  3. 8000 L
  4. 6000 L
Answer and explanation

Answer: C

Raw fraction = 60 ÷ 300 = 0.2, so raw = 2000 L and softened = 8000 L.

Equal volumes of water with 81 mg/L Ca(HCO3)2 and water with 111 mg/L CaCl2 are mixed. The permanent hardness of the mixture is:

  1. 100 ppm
  2. 25 ppm
  3. 75 ppm
  4. 50 ppm
Answer and explanation

Answer: D

CaCl2 gives 100 ppm as CaCO3; after mixing equal volumes it is halved to 50 ppm.

A softener treats 3000 L/h of 200 ppm water for 10 hours. The hardness removed (as CaCO3) is:

  1. 600 g
  2. 60 kg
  3. 6.0 kg
  4. 600 kg
Answer and explanation

Answer: C

Volume = 30,000 L; hardness = 200 mg/L × 30,000 L = 6,000,000 mg = 6.0 kg.

Water of 200 ppm is mixed with water of 50 ppm to give 125 ppm. The volumes needed are in the ratio (hard : soft):

  1. 1 : 1
  2. 1 : 2
  3. 2 : 1
  4. 1 : 3
Answer and explanation

Answer: A

200x + 50(1 − x) = 125 gives x = 0.5, so the volumes are equal.

400 L of water of 300 ppm is mixed with 600 L of water of 100 ppm. The hardness of the mixture is:

  1. 200 ppm
  2. 180 ppm
  3. 220 ppm
  4. 150 ppm
Answer and explanation

Answer: B

Mass = 400 × 300 + 600 × 100 = 180,000 mg in 1000 L, so 180 ppm.

Privacy · Terms · Refunds · Delivery