Unit 11 Fundamentals of Organic Chemistry
Practice questions
On a TLC plate spot X has R_f = 0.25 and spot Y has R_f = 0.70 with the same solvent. Which statement is correct?
- X moved further than Y.
- Y is more strongly adsorbed than X.
- X is more strongly adsorbed on the plate than Y.
- The solvent front moved less than spot Y.
Answer and explanation
Answer: C
A smaller R_f means the substance moved a smaller fraction of the solvent's distance because it was held more strongly by the adsorbent. So X is adsorbed more strongly than Y. No spot can pass the solvent front.
Which pair of solids would be separated by sublimation?
- Benzoic acid and sand
- Sugar and salt
- Sodium chloride and potassium chloride
- Sand and salt
Answer and explanation
Answer: A
Benzoic acid sublimes on heating while sand does not, so heating collects pure benzoic acid on a cool surface. In the other pairs neither solid sublimes.
Nitrobenzene (b.p. 484 K) and benzene (b.p. 354 K) can be separated by:
- Sublimation
- Steam distillation only
- Chromatography only
- Simple distillation
Answer and explanation
Answer: D
Their boiling points differ by 484 − 354 = 130 K, a large gap, so simple distillation separates them: benzene distils first.
0.20 g of a compound gave 22.4 mL of N₂ at STP in a Dumas estimation. What is the percentage of nitrogen?
- 7%
- 28%
- 14%
- 11.2%
Answer and explanation
Answer: C
22400 mL of N₂ at STP weighs 28 g, so 22.4 mL weighs 0.028 g. % N = 0.028 ÷ 0.20 × 100 = 14%.
0.25 g of a compound containing C, H and O gave 0.55 g CO₂ and 0.30 g H₂O on combustion. What are the percentages of C and H?
- C 60.0%, H 13.3%
- C 40.0%, H 6.7%
- C 54.5%, H 11.1%
- C 66.0%, H 12.0%
Answer and explanation
Answer: A
C = 12 × 0.55 ÷ 44 = 0.15 g, so % C = 0.15 ÷ 0.25 × 100 = 60.0%. H = 2 × 0.30 ÷ 18 = 0.0333 g, so % H = 0.0333 ÷ 0.25 × 100 = 13.3%. (Oxygen by difference is 26.7%.)
In the Lassaigne test for nitrogen, the Prussian blue precipitate is:
- Na₄[Fe(CN)₆]
- Fe₄[Fe(CN)₆]₃
- [Fe(SCN)]²⁺
- Fe(OH)₂
Answer and explanation
Answer: B
Sodium ferrocyanide, formed from NaCN and FeSO₄, reacts with Fe³⁺: 3Na₄[Fe(CN)₆] + 4FeCl₃ → Fe₄[Fe(CN)₆]₃ + 12NaCl. Iron(III) ferrocyanide, Fe₄[Fe(CN)₆]₃, is Prussian blue.
How many isomeric alkenes (counting cis and trans separately) have the formula C₄H₈?
- 2
- 3
- 5
- 4
Answer and explanation
Answer: D
But-1-ene, cis-but-2-ene, trans-but-2-ene and 2-methylpropene: 4 alkenes. (Cyclobutane and methylcyclopropane are also C₄H₈ but are not alkenes.)
Which of these can show optical isomerism?
- Propan-2-ol
- 2-Methylpropan-2-ol
- Ethanol
- 2-Hydroxypropanoic acid (lactic acid)
Answer and explanation
Answer: D
In lactic acid, CH₃–CH(OH)–COOH, C2 carries H, OH, CH₃ and COOH, four different groups: a chiral carbon. The others have no carbon with four different groups.
Propanone and prop-1-en-2-ol interconvert by moving a hydrogen atom. This is:
- Metamerism
- Keto-enol tautomerism
- Position isomerism
- Optical isomerism
Answer and explanation
Answer: B
A hydrogen moves between carbon and oxygen across C–C=O (a triad, 1,3-shift), converting the keto form into the enol form: keto-enol tautomerism.
Which name follows IUPAC rules correctly?
- 2-Ethylbutane
- 4-Methylpentane
- 2,2-Dimethylpropane
- 1,1-Dimethylethane
Answer and explanation
Answer: C
2,2-Dimethylpropane, C(CH₃)₄, is correct. 2-Ethylbutane should be 3-methylpentane (longer chain), 4-methylpentane should be 2-methylpentane (lowest locant), and 1,1-dimethylethane is just butane.
What is the IUPAC name of CH₃–CO–CH=CH₂?
- But-3-en-2-one
- But-1-en-3-one
- Butan-2-one
- But-2-en-3-one
Answer and explanation
Answer: A
The ketone is the principal group and must get the lowest locant: numbering from the left puts C=O at C2 and the C=C at C3. Name: but-3-en-2-one.
What is the IUPAC name of CH₃–CH(CH₃)–CH₂–COOH?
- 2-Methylbutanoic acid
- 3-Methylbutanoic acid
- Isopentanoic acid
- 3-Methylpropanoic acid
Answer and explanation
Answer: B
The chain including the COOH carbon has 4 C (butanoic acid), with COOH as C1. Counting C1 (COOH), C2 (CH₂), C3 (CH carrying the methyl), C4 (CH₃): 3-methylbutanoic acid.
Thiophene is a five-membered aromatic ring containing sulphur. Cyclohexane is a six-membered ring of CH₂ groups. Which pair of labels is correct?
- Thiophene: aromatic heterocyclic; cyclohexane: alicyclic homocyclic
- Thiophene: alicyclic; cyclohexane: aromatic
- Both: aromatic homocyclic
- Thiophene: open chain; cyclohexane: heterocyclic
Answer and explanation
Answer: A
Thiophene's ring contains S and is aromatic: aromatic heterocyclic. Cyclohexane's ring is all carbon and not aromatic: alicyclic (homocyclic).
What is the molecular formula of the fourth member of the alkyne series (starting from ethyne)?
- C₄H₆
- C₅H₁₀
- C₅H₈
- C₄H₈
Answer and explanation
Answer: C
Alkynes start at C₂ (ethyne), so the fourth member has n = 5: CₙH₂ₙ₋₂ = C₅H₈ (pentyne).
How many π bonds are there in CH₂=CH–C≡C–CHO?
- 3
- 4
- 5
- 2
Answer and explanation
Answer: B
Count the multiple bonds: C=C gives 1 π, C≡C gives 2 π and the C=O of CHO gives 1 π. Total = 1 + 2 + 1 = 4 π bonds.
Why can ethanol containing a little water not be completely dried by fractional distillation alone?
- Ethanol and water have the same boiling point.
- Ethanol decomposes on heating.
- Ethanol and water are immiscible.
- They form an azeotrope, a constant-boiling mixture that distils unchanged.
Answer and explanation
Answer: D
At a certain composition ethanol and water form an azeotrope whose vapour has the same composition as the liquid, so distillation cannot change it. A third substance (azeotropic distillation) is needed.
What is the basis of separation in thin layer chromatography on silica gel?
- Different boiling points
- Different degrees of adsorption on the stationary phase
- Different densities
- Different solubilities in hot and cold water
Answer and explanation
Answer: B
TLC on silica gel is adsorption chromatography: the more strongly a component is adsorbed, the less far it moves with the solvent.
In a paper chromatogram the solvent front is 12.0 cm and a spot is 4.8 cm from the starting line. What is its R_f?
- 2.5
- 0.48
- 0.60
- 0.40
Answer and explanation
Answer: D
R_f = distance of spot ÷ distance of solvent front = 4.8 ÷ 12.0 = 0.40. (2.5 is the inverse; R_f can never exceed 1.)
Essential oils are extracted from flowers by which method?
- Steam distillation
- Simple distillation
- Sublimation
- Crystallisation
Answer and explanation
Answer: A
Essential oils are steam-volatile and immiscible with water, and could decompose at their own boiling points; with steam they distil below 373 K.
Which method is best for separating a mixture of camphor and common salt?
- Steam distillation
- Fractional distillation
- Sublimation
- Differential extraction
Answer and explanation
Answer: C
Camphor sublimes on heating while salt does not, so heating the mixture under a cool surface collects pure camphor.