Unit 13 Hydrocarbons

Practice questions

Which statement about the sulphonation of benzene is correct?

  1. The electrophile is the neutral molecule SO₃ and the reaction is reversible
  2. The electrophile is HSO₄⁻
  3. It needs anhydrous AlCl₃ as catalyst
  4. It gives an addition product
Answer and explanation

Answer: A

In fuming sulphuric acid the sulphur of SO₃ is short of an octet and acts as an electrophile though uncharged. Benzenesulphonic acid loses SO₃ again (desulphonation) when heated with water, so the reaction is reversible.

Nitrobenzene is brominated with Br₂ and FeBr₃. The main product is

  1. 1-bromo-2-nitrobenzene
  2. 1-bromo-4-nitrobenzene
  3. 1-bromo-3-nitrobenzene
  4. bromobenzene
Answer and explanation

Answer: C

–NO₂ withdraws electrons by −I and −M and leaves positive charge at the ortho and para positions, so the electrophile Br⁺ enters the meta position: 1-bromo-3-nitrobenzene (m-bromonitrobenzene).

In the Friedel–Crafts acylation of benzene with CH₃COCl and anhydrous AlCl₃, the electrophile and the product are

  1. CH₃⁺ and toluene
  2. CH₃CO⁺ and acetophenone
  3. Cl⁺ and chlorobenzene
  4. CH₃COO⁻ and phenyl acetate
Answer and explanation

Answer: B

AlCl₃ removes Cl⁻ from acetyl chloride: CH₃COCl + AlCl₃ → CH₃CO⁺ + AlCl₄⁻. The acylium ion attacks the ring and, after loss of H⁺, gives C₆H₅COCH₃, acetophenone.

Propyne reacts with two molecules of HBr (no peroxide). The final product is

  1. 1,1-dibromopropane
  2. 1,2-dibromopropane
  3. 2,2-dibromopropane
  4. 1,3-dibromopropane
Answer and explanation

Answer: C

The first HBr adds by Markovnikov's rule to give CH₃CBr=CH₂ (2-bromopropene). The second H⁺ again goes to CH₂, and Br to the carbon that already carries Br: CH₃CBr₂CH₃, 2,2-dibromopropane.

What volume of ethyne, measured at STP (22.4 L mol⁻¹), is obtained from 6.4 g of calcium carbide with excess water? (Ca = 40, C = 12)

  1. 1.12 L
  2. 2.24 L
  3. 4.48 L
  4. 22.4 L
Answer and explanation

Answer: B

Molar mass CaC₂ = 40 + 24 = 64 g mol⁻¹, so 6.4 g = 0.1 mol. CaC₂ + 2H₂O → C₂H₂ + Ca(OH)₂ gives 1 mol C₂H₂ per mol CaC₂, so 0.1 mol ethyne = 0.1 × 22.4 = 2.24 L.

Pent-2-ene, CH₃CH=CHCH₂CH₃, is ozonised and the ozonide treated with Zn/H₂O. The products are

  1. ethanal and propanal
  2. two molecules of propanal
  3. methanal and butanal
  4. ethanal and propan-2-one
Answer and explanation

Answer: A

Cut the C=C bond between C2 and C3 and put =O on each carbon: CH₃CH=O (ethanal, 2 C) and O=CHCH₂CH₃ (propanal, 3 C). Carbon check: 2 + 3 = 5.

Which alkene gives DIFFERENT products with HBr in the presence and in the absence of peroxide?

  1. Ethene
  2. But-2-ene
  3. Cyclohexene
  4. Propene
Answer and explanation

Answer: D

Only an unsymmetrical alkene can add HBr two different ways. Propene gives 2-bromopropane without peroxide and 1-bromopropane with it. Ethene, but-2-ene and cyclohexene are symmetrical about the C=C bond, so both ways give the same product.

2-Methylbut-2-ene, (CH₃)₂C=CH–CH₃, is hydrated with dilute acid. By Markovnikov's rule the major product is

  1. 3-methylbutan-2-ol
  2. 2-methylbutan-2-ol
  3. 2-methylbutan-1-ol
  4. pentan-2-ol
Answer and explanation

Answer: B

H⁺ adds to the CH carbon (it has one H; the other carbon has none), giving the tertiary cation (CH₃)₂C⁺–CH₂CH₃. Water attacks there and loses H⁺, so OH ends up on C2: (CH₃)₂C(OH)CH₂CH₃, 2-methylbutan-2-ol.

3-Methylbut-1-ene reacts with HBr (no peroxide). The major product is 2-bromo-2-methylbutane because

  1. the reaction goes by free radicals
  2. the secondary carbocation first formed rearranges by a hydride shift to a more stable tertiary carbocation
  3. bromine adds to the carbon with more hydrogens
  4. HBr adds in two separate steps to different molecules
Answer and explanation

Answer: B

H⁺ adds to C1 giving the secondary cation at C2. A hydride shift from C3 moves the positive charge to C3, which carries two methyl groups (tertiary, more stable). Br⁻ then bonds there, giving 2-bromo-2-methylbutane.

Ethanol is heated with excess concentrated H₂SO₄ at 430–440 K. The main product is

  1. ethene
  2. ethane
  3. ethyne
  4. diethyl sulphate only
Answer and explanation

Answer: A

Under these conditions the acid removes a molecule of water from ethanol, an elimination: C₂H₅OH → CH₂=CH₂ + H₂O. Atom check: C 2 = 2; H 6 = 4 + 2; O 1 = 1.

An open-chain hydrocarbon has the formula C₇H₁₂. Among these series, it belongs to the

  1. alkanes
  2. alkenes
  3. alkynes
  4. cycloalkanes
Answer and explanation

Answer: C

For n = 7: alkanes would be C₇H₁₆ (CₙH₂ₙ₊₂), alkenes and cycloalkanes C₇H₁₄ (CₙH₂ₙ), and alkynes C₇H₁₂ (CₙH₂ₙ₋₂). So C₇H₁₂ fits the alkynes.

How many different monochloro products can form when propane is chlorinated in light?

  1. 1
  2. 2
  3. 3
  4. 4
Answer and explanation

Answer: B

Propane, CH₃–CH₂–CH₃, has two kinds of hydrogen: six on the end carbons and two on the middle carbon. Replacing one of each kind gives 1-chloropropane and 2-chloropropane, so there are 2 products.

Which method gives an alkane with the SAME number of carbon atoms as the organic starting compound?

  1. Heating a sodium carboxylate with soda lime
  2. Kolbe electrolysis of a sodium carboxylate
  3. Wurtz reaction of an alkyl halide
  4. Catalytic hydrogenation of an alkene
Answer and explanation

Answer: D

Hydrogenation only adds H₂ across the double bond, so the carbon skeleton is unchanged (propene → propane). Soda lime removes one carbon, and Kolbe and Wurtz join two alkyl groups.

In ethene, each C–H σ bond is formed by the overlap of

  1. sp³ and s orbitals
  2. sp² and s orbitals
  3. sp and s orbitals
  4. p and p orbitals
Answer and explanation

Answer: B

Each carbon in ethene is sp² hybridised: it uses sp² orbitals for its two C–H bonds and one C–C σ bond, and the leftover p orbitals form the π bond. So C–H is sp²–s overlap.

Which alkyl halide, heated with sodium in dry ether, gives 2,3-dimethylbutane as the main product?

  1. 1-Bromopropane
  2. 2-Bromopropane
  3. 2-Bromobutane
  4. 1-Bromo-2-methylpropane
Answer and explanation

Answer: B

2,3-Dimethylbutane is (CH₃)₂CH–CH(CH₃)₂: two isopropyl groups joined. Wurtz coupling of two (CH₃)₂CH–Br molecules joins them at the carbon that carried Br. 1-Bromopropane would give hexane.

How many moles of H₂ are needed to convert 39 g of benzene completely into cyclohexane? (C = 12, H = 1)

  1. 0.5
  2. 1.5
  3. 3
  4. 6
Answer and explanation

Answer: B

Molar mass of C₆H₆ = 72 + 6 = 78 g mol⁻¹, so 39 g = 0.5 mol. C₆H₆ + 3H₂ → C₆H₁₂ needs 3 mol H₂ per mol benzene: 0.5 × 3 = 1.5 mol H₂.

All six C–C bonds in benzene are 1.40 Å long. What does this show?

  1. Benzene has three single and three double bonds that stay fixed
  2. The π electrons are delocalised, so every bond is intermediate between single and double
  3. Benzene is an alkyne
  4. Benzene is not planar
Answer and explanation

Answer: B

If the bonds were fixed, there would be three bonds of 1.54 Å and three of 1.34 Å. Equal 1.40 Å bonds mean each bond is the same mixture, as expected for the resonance hybrid with delocalised π electrons.

Which group is a meta director?

  1. –OH
  2. –CH₃
  3. –Cl
  4. –CHO
Answer and explanation

Answer: D

The aldehyde group withdraws electrons by −I and −M, leaving positive charge at the ortho and para positions; meta is attacked. –OH and –CH₃ are activating o,p-directors, and –Cl is a deactivating o,p-director.

In the nitration of benzene, the role of concentrated H₂SO₄ is to

  1. generate the nitronium ion NO₂⁺ from HNO₃
  2. act as the nucleophile
  3. dehydrate benzene
  4. provide SO₃ as the electrophile
Answer and explanation

Answer: A

Sulphuric acid protonates nitric acid, which loses water to give NO₂⁺: HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻. NO₂⁺ is the electrophile that attacks the ring.

Which species is NOT aromatic?

  1. Cyclopentadienyl anion
  2. Cyclopropenyl cation
  3. Cyclooctatetraene
  4. Furan
Answer and explanation

Answer: C

Cyclooctatetraene has 8 π electrons (not 4n + 2) and its ring is tub-shaped, not planar, so its π electrons are not delocalised round the ring. The other three are planar with 6, 2 and 6 π electrons respectively.

Privacy · Terms · Refunds · Delivery