Unit 4 Hydrogen

Practice questions

Which order of strength of attractions is correct?

  1. Van der Waals forces > hydrogen bond > covalent bond
  2. Hydrogen bond > covalent bond > van der Waals forces
  3. Covalent bond > hydrogen bond > van der Waals forces
  4. All three are equally strong
Answer and explanation

Answer: C

A covalent bond (over 100 kJ mol⁻¹) is stronger than a hydrogen bond (about 20-50 kJ mol⁻¹), which is stronger than van der Waals forces (under 20 kJ mol⁻¹).

What volume of H₂ at 273 K and 1 atm is released from 100 g of palladium of composition PdH₀.₆ when all the hydrogen is driven out? (Pd = 106.4)

  1. 12.6 L
  2. 6.3 L
  3. 3.2 L
  4. 0.56 L
Answer and explanation

Answer: B

n(Pd) = 100 ÷ 106.4 = 0.940 mol; H atoms = 0.6 × 0.940 = 0.564 mol; H₂ = 0.282 mol; V = 0.282 × 22.4 = 6.3 L. (12.6 L forgets that two H atoms make one H₂ molecule.)

Which statement about metallic (interstitial) hydrides is correct?

  1. They are salt-like solids containing H⁻ ions
  2. They are gases made of small molecules
  3. They are formed only by non-metals
  4. They are often non-stoichiometric, such as TiH₁.₅₋₁.₈, with hydrogen in lattice voids
Answer and explanation

Answer: D

In metallic hydrides hydrogen occupies interstitial sites of the metal lattice, so compositions vary, as in TiH₁.₅₋₁.₈ and PdH₀.₆₋₀.₈. Salt-like H⁻ solids are ionic hydrides; small-molecule gases are covalent hydrides.

Magnesium nitride reacts with heavy water: Mg₃N₂ + 6D₂O → 3Mg(OD)₂ + 2X. What is X?

  1. NH₃
  2. ND₃
  3. N₂
  4. ND₄OD
Answer and explanation

Answer: B

Balancing: N 2 on the left needs 2X with one N each; D: 12 on the left, 6 in 3Mg(OD)₂, so 6 left for 2X, i.e. 3 D each. X = ND₃, deuterated ammonia.

When old paintings are restored with H₂O₂ (PbS + 4H₂O₂ → PbSO₄ + 4H₂O), how does the oxidation number of sulphur change?

  1. From −2 to +6
  2. From +2 to +6
  3. From −2 to 0
  4. From +6 to −2
Answer and explanation

Answer: A

In PbS, Pb is +2 so S is −2. In PbSO₄, (+2) + x + 4(−2) = 0 gives x = +6. Sulphur is oxidised from −2 to +6 by H₂O₂.

What is the volume strength of a 1.5 M hydrogen peroxide solution?

  1. 1.5 volume
  2. 11.2 volume
  3. 16.8 volume
  4. 33.6 volume
Answer and explanation

Answer: C

Volume strength = molarity × 11.2 = 1.5 × 11.2 = 16.8. Check: 1.5 mol H₂O₂ per litre gives 0.75 mol O₂ = 0.75 × 22.4 = 16.8 L.

How many molecules of water are needed to hydrolyse one molecule of P₄O₁₀ completely to H₃PO₄?

  1. 4
  2. 10
  3. 2
  4. 6
Answer and explanation

Answer: D

P₄O₁₀ + 6H₂O → 4H₃PO₄. Check: P 4 = 4; H 12 = 4 × 3; O 10 + 6 = 16 = 4 × 4.

Which gas is liberated when fluorine reacts with water?

  1. Hydrogen
  2. Chlorine
  3. Oxygen
  4. Ozone only
Answer and explanation

Answer: C

2F₂ + 2H₂O → 4HF + O₂. Unlike chlorine, which gives HCl and HOCl, fluorine oxidises water and liberates oxygen.

In Clark's method, 1.62 g of Ca(HCO₃)₂ is removed with lime: Ca(HCO₃)₂ + Ca(OH)₂ → 2CaCO₃ + 2H₂O. What mass of CaCO₃ precipitates?

  1. 2.0 g
  2. 1.0 g
  3. 1.62 g
  4. 0.74 g
Answer and explanation

Answer: A

M(Ca(HCO₃)₂) = 162 g mol⁻¹, so n = 0.01 mol. Each mole gives 2 mol CaCO₃: 0.02 mol × 100 g mol⁻¹ = 2.0 g. (0.74 g is the mass of lime used.)

How is tritium prepared?

  1. By electrolysis of heavy water
  2. By passing steam over red-hot coke
  3. By the reaction of zinc with dilute acid
  4. By bombarding lithium-6 with slow neutrons in a nuclear reactor
Answer and explanation

Answer: D

⁶₃Li + ¹₀n → ⁴₂He + ³₁T. Tritium is too rare in nature to collect, so it is made by this nuclear reaction. Electrolysis of heavy water gives deuterium.

What volume of hydrogen at 273 K and 1 atm is needed to convert 2.6 g of ethyne completely into ethane over nickel?

  1. 2.24 L
  2. 4.48 L
  3. 6.72 L
  4. 1.12 L
Answer and explanation

Answer: B

n(C₂H₂) = 2.6 ÷ 26 = 0.1 mol. Ethyne → ethene → ethane uses 2 mol H₂ per mol, so 0.2 mol H₂ = 0.2 × 22.4 = 4.48 L.

1 kg of methane is converted to hydrogen by steam reforming followed by the shift reaction (overall CH₄ + 2H₂O → CO₂ + 4H₂). What mass of hydrogen is obtained?

  1. 375 g
  2. 250 g
  3. 500 g
  4. 125 g
Answer and explanation

Answer: C

n(CH₄) = 1000 ÷ 16 = 62.5 mol. Overall 1 mol CH₄ gives 4 mol H₂, so 250 mol H₂ = 250 × 2 = 500 g. (375 g is the hydrogen from reforming alone, 187.5 mol.)

What happens to the ortho : para ratio of hydrogen when it is cooled to a very low temperature?

  1. The equilibrium shifts towards para-hydrogen
  2. The equilibrium shifts towards ortho-hydrogen
  3. The ratio stays at 3 : 1
  4. All the hydrogen becomes atomic
Answer and explanation

Answer: A

Para-hydrogen is the lower-energy form, so at low temperature the equilibrium favours it. At room temperature the ratio is about 3 : 1 ortho : para.

What is the molar mass of super-heavy water, T₂O? (T = 3.016, O = 16.00)

  1. 20.03 g mol⁻¹
  2. 22.03 g mol⁻¹
  3. 18.02 g mol⁻¹
  4. 24.03 g mol⁻¹
Answer and explanation

Answer: B

T₂O = 2 × 3.016 + 16.00 = 6.032 + 16.00 = 22.03 g mol⁻¹.

Which property of hydrogen makes it resemble the halogens?

  1. It forms the H⁺ ion
  2. It has a low ionisation energy like sodium
  3. It is a reducing agent
  4. It gains one electron to form H⁻ with a noble-gas configuration
Answer and explanation

Answer: D

Like a halogen forming X⁻, hydrogen can gain one electron to form the hydride ion H⁻, with helium's configuration. Forming H⁺ and acting as a reducing agent are alkali-metal-like, and its ionisation energy is actually high.

Using ΔH = −285.9 kJ mol⁻¹ for the formation of water, about how much energy is released per gram of hydrogen burnt?

  1. 285.9 kJ
  2. 141.8 kJ
  3. 571.8 kJ
  4. 71.0 kJ
Answer and explanation

Answer: B

1 mol H₂ = 2.016 g releases 285.9 kJ. Per gram: 285.9 ÷ 2.016 = 141.8 kJ.

Why is ice less dense than liquid water at 0 °C?

  1. Ice contains fewer hydrogen bonds than water
  2. Hydrogen bonds in ice hold molecules in an open tetrahedral network with empty spaces
  3. Ice molecules are heavier
  4. Ice has no hydrogen bonds at all
Answer and explanation

Answer: B

In ice each oxygen is tetrahedrally hydrogen-bonded to four others, producing an open three-dimensional structure. In liquid water this long-range order breaks down and molecules pack more closely, so water is denser.

Which molecule shows intramolecular hydrogen bonding?

  1. ortho-Nitrophenol
  2. Water
  3. Ammonia dissolved in water
  4. Liquid hydrogen fluoride
Answer and explanation

Answer: A

In ortho-nitrophenol the O-H group and the neighbouring nitro group are close enough to hydrogen-bond within the same molecule. The others form hydrogen bonds between molecules (intermolecular).

Which hydride is electron-deficient?

  1. NH₃
  2. CH₄
  3. H₂O
  4. B₂H₆
Answer and explanation

Answer: D

Diborane, B₂H₆, does not have enough electrons for ordinary two-electron bonds between all its atoms, so it is electron-deficient. CH₄ is electron-precise; NH₃ and H₂O have lone pairs and are electron-rich.

Which of these is an ionic (saline) hydride?

  1. CH₄
  2. B₂H₆
  3. CaH₂
  4. PdH₀.₆
Answer and explanation

Answer: C

CaH₂ is formed from an electropositive alkaline earth metal and contains H⁻ ions, so it is ionic. CH₄ and B₂H₆ are covalent, and PdH₀.₆ is a metallic (interstitial) hydride.

Privacy · Terms · Refunds · Delivery