Unit 5 Alkali and Alkaline Earth Metals
Practice questions
A doctor's cast is made by mixing plaster of Paris with water. Which change happens as it sets?
- CaSO₄·½H₂O + 1½H₂O → CaSO₄·2H₂O
- CaSO₄·2H₂O → CaSO₄·½H₂O + 1½H₂O
- CaSO₄ + 2H₂O → CaSO₄·2H₂O only above 393 K
- CaO + H₂O → Ca(OH)₂
Answer and explanation
Answer: A
Setting is the reverse of making plaster of Paris: the hemihydrate takes up water and forms interlocking crystals of gypsum, CaSO₄·2H₂O. Water check: ½ + 1½ = 2. CaSO₄·2H₂O → CaSO₄·½H₂O + 1½H₂O is how plaster of Paris is made from gypsum, not how it sets.
A builder heats 500 kg of pure limestone in a kiln. What mass of quick lime is produced? (Ca = 40, C = 12, O = 16)
- 220 kg
- 560 kg
- 280 kg
- 500 kg
Answer and explanation
Answer: C
CaCO₃ → CaO + CO₂. M(CaCO₃) = 100 g mol⁻¹ and M(CaO) = 56 g mol⁻¹, so 100 kg of limestone gives 56 kg of lime. 500 kg gives 5 × 56 = 280 kg; the other 220 kg leaves as CO₂.
Which of these group 2 carbonates needs the highest temperature to decompose?
- MgCO₃
- CaCO₃
- SrCO₃
- BaCO₃
Answer and explanation
Answer: D
Thermal stability of group 2 carbonates increases down the group, because larger cations distort the carbonate ion less. The textbook's values are about 540 °C (Mg), 900 °C (Ca), 1290 °C (Sr) and 1360 °C (Ba).
Which equation correctly shows beryllium hydroxide acting as an acid?
- Be(OH)₂ + 2HCl → BeCl₂ + 2H₂O
- Be(OH)₂ → BeO + H₂O
- Be(OH)₂ + 2NaOH → Na₂BeO₂ + 2H₂O
- Be(OH)₂ + NaOH → NaBeO₂ + H₂O
Answer and explanation
Answer: C
Reacting with a base shows acidic behaviour: Be(OH)₂ + 2NaOH → Na₂BeO₂ + 2H₂O. Atom check: Be 1 = 1; Na 2 = 2; O 2 + 2 = 2 + 2; H 2 + 2 = 4. The reaction with HCl shows basic behaviour, and Be(OH)₂ + NaOH → NaBeO₂ + H₂O is unbalanced.
Which pair shows a diagonal relationship and the reason for it?
- Li and Na: same group
- Be and Mg: same number of valence electrons
- Be and Al: similar charge-to-size ratio and electronegativity
- Mg and Al: same period
Answer and explanation
Answer: C
Diagonal pairs are a period-2 element and the element below and to its right (Li–Mg, Be–Al). Be²⁺ and Al³⁺ have similar charge per unit size and similar electronegativity, so their compounds behave alike.
Assertion (A): The first ionisation enthalpy of beryllium is higher than that of lithium. Reason (R): Beryllium has a higher nuclear charge and a smaller atom than lithium.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Answer and explanation
Answer: A
Be (Z = 4) holds its 2s electrons more tightly than Li (Z = 3) because the nuclear charge is greater and the atom is smaller. So IE₁ of Be (about 900 kJ mol⁻¹) is higher than that of Li (about 520 kJ mol⁻¹), and R explains A.
Sodium hydroxide is needed for an industrial batch. If 4.0 kg of NaOH must be made by electrolysing brine, how much chlorine is formed at the same time? (2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂; Na = 23, O = 16, H = 1, Cl = 35.5)
- 7.1 kg
- 1.775 kg
- 3.55 kg
- 4.0 kg
Answer and explanation
Answer: C
4.0 kg NaOH = 4000 ÷ 40 = 100 mol. The equation gives 1 mol Cl₂ per 2 mol NaOH, so Cl₂ = 50 mol = 50 × 71 g = 3550 g = 3.55 kg. 7.1 kg ignores the 2 : 1 ratio.
In the Solvay process, which substance is the main by-product once ammonia has been recovered?
- Sodium chloride
- Calcium chloride
- Ammonium bicarbonate
- Sodium hydroxide
Answer and explanation
Answer: B
Ammonia is recovered by 2NH₄Cl + Ca(OH)₂ → CaCl₂ + 2NH₃ + 2H₂O, so calcium chloride is left as the by-product. Ammonium bicarbonate is an intermediate, not a by-product.
Which of these is the correct reason that LiF is only sparingly soluble in water while the other lithium halides dissolve?
- LiF is covalent.
- Fluoride ion is not hydrated.
- Li⁺ and F⁻ are both small, so the lattice enthalpy of LiF is very high.
- LiF reacts with water to form HF.
Answer and explanation
Answer: C
A lattice of two small ions is held together very strongly; the hydration energy cannot overcome this very high lattice enthalpy, so LiF is sparingly soluble. LiF is ionic, not covalent; it is LiBr and LiI that show covalent character.
How many moles of O₂ are released when 14.2 g of potassium superoxide reacts completely with water by 2KO₂ + 2H₂O → 2KOH + H₂O₂ + O₂? (K = 39, O = 16)
- 0.100 mol
- 0.200 mol
- 0.050 mol
- 0.400 mol
Answer and explanation
Answer: A
M(KO₂) = 39 + 32 = 71 g mol⁻¹, so 14.2 g = 0.200 mol. The equation gives 1 mol O₂ for every 2 mol KO₂, so O₂ = 0.200 ÷ 2 = 0.100 mol.
Dilute solutions of sodium in liquid ammonia are blue and paramagnetic. On standing they slowly release a gas. Which equation shows this change?
- Na + NH₃ → NaNH₂ + H₂
- Na⁺ + e⁻ + NH₃ → NaNH₂ + ½H₂
- 2Na + 2NH₃ → 2NaH + N₂ + 2H₂
- Na⁺ + e⁻ → Na
Answer and explanation
Answer: B
The ammoniated electron reduces ammonia, giving the amide and hydrogen: Na⁺ + e⁻ + NH₃ → NaNH₂ + ½H₂. Atom check: Na 1 = 1; N 1 = 1; H 3 = 2 + 1. Na + NH₃ → NaNH₂ + H₂ is not balanced for hydrogen (3 on the left, 4 on the right).
Which pair of statements both describe lithium but NOT sodium?
- Forms a nitride directly; carbonate decomposes easily on heating
- Reacts with water; forms an ionic chloride
- Shows +1 oxidation state; forms a hydride
- Gives a superoxide on burning; forms a solid bicarbonate
Answer and explanation
Answer: A
Li forms Li₃N directly and Li₂CO₃ decomposes readily to Li₂O + CO₂; sodium does neither. Both metals react with water, form ionic chlorides, are +1 and form hydrides. Lithium forms neither a superoxide nor a solid bicarbonate.
Which alkali metal ion has the highest tendency to change from M⁺(g) to M⁺(aq), that is, the most negative hydration enthalpy?
- Na⁺
- K⁺
- Li⁺
- Rb⁺
Answer and explanation
Answer: C
The smallest ion attracts water molecules most strongly. Li⁺ is the smallest, so its hydration enthalpy is the most negative. This also explains why lithium salts are often very soluble.
Light from a lithium flame has wavelength 670.8 nm. What is the energy per mole of photons? (h = 6.626 × 10⁻³⁴ J s, c = 3.0 × 10⁸ m s⁻¹, Nₐ = 6.022 × 10²³ mol⁻¹)
- 203 kJ mol⁻¹
- 178 kJ mol⁻¹
- 2.96 × 10⁻¹⁹ kJ mol⁻¹
- 267 kJ mol⁻¹
Answer and explanation
Answer: B
E per photon = hc/λ = (1.9878 × 10⁻²⁵ J m) ÷ (6.708 × 10⁻⁷ m) = 2.963 × 10⁻¹⁹ J. Per mole: 2.963 × 10⁻¹⁹ × 6.022 × 10²³ = 1.785 × 10⁵ J mol⁻¹ ≈ 178 kJ mol⁻¹. 203 kJ mol⁻¹ is sodium's 589 nm line.
For the alkali metals, which trend is INCORRECT?
- Hydration enthalpy: Li⁺ > Na⁺ > K⁺ > Rb⁺
- Ionisation enthalpy: Li > Na > K > Rb
- Atomic radius: Li < Na < K < Rb
- Density: Li < Na < K < Rb
Answer and explanation
Answer: D
Density does not rise steadily: according to the textbook's table potassium (0.86 g cm⁻³) is less dense than sodium (0.97 g cm⁻³), so Li < Na < K < Rb is wrong. The other three trends hold all the way down the group.
How much plaster of Paris (M = 145 g mol⁻¹) forms from 8.6 g of gypsum (M = 172 g mol⁻¹)?
- 7.25 g
- 14.5 g
- 8.6 g
- 6.8 g
Answer and explanation
Answer: A
2CaSO₄·2H₂O → 2CaSO₄·½H₂O + 3H₂O is 1 : 1 for calcium sulphate units. Moles of gypsum = 8.6 ÷ 172 = 0.050 mol, so plaster of Paris = 0.050 × 145 = 7.25 g. 14.5 g would need 0.100 mol of gypsum.
What is 'dead burnt plaster'?
- Anhydrous calcium sulphate formed by heating gypsum above 393 K
- Plaster of Paris that has set with water
- Calcium sulphate dihydrate
- A mixture of quick lime and sodium hydroxide
Answer and explanation
Answer: A
Heating gypsum to 393 K gives CaSO₄·½H₂O (plaster of Paris). Heating above 393 K removes all water and gives anhydrous CaSO₄, which does not set with water, so it is called dead burnt. Set plaster is gypsum again; CaO + NaOH is soda lime.
Which equation for the reaction of chlorine with slaked lime is balanced?
- Ca(OH)₂ + Cl₂ → CaCl₂ + Ca(OCl)₂ + H₂O
- 2Ca(OH)₂ + Cl₂ → CaCl₂ + Ca(OCl)₂ + 2H₂O
- Ca(OH)₂ + 2Cl₂ → CaCl₂ + Ca(OCl)₂ + 2H₂O
- 2Ca(OH)₂ + 2Cl₂ → CaCl₂ + Ca(OCl)₂ + 2H₂O
Answer and explanation
Answer: D
Check each atom in the last equation: Ca 2 = 1 + 1; O 4 = 2 + 2; H 4 = 4; Cl 4 = 2 + 2. In the other versions calcium, chlorine or oxygen does not balance.
Why is carbon dioxide removed continuously from a lime kiln?
- CO₂ is poisonous to the kiln lining.
- CaCO₃ ⇌ CaO + CO₂ is reversible, so removing CO₂ drives the reaction forward to completion.
- CO₂ reacts with the fuel and stops it burning.
- CO₂ would turn quick lime into slaked lime.
Answer and explanation
Answer: B
If CO₂ stayed in contact with hot CaO, it would recombine to form CaCO₃. Removing a product shifts the equilibrium to the right, so more limestone decomposes.
Which trend down group 2 is correct?
- Solubility of hydroxides decreases.
- Thermal stability of carbonates increases.
- Solubility of sulphates increases.
- Basic character of hydroxides decreases.
Answer and explanation
Answer: B
Larger cations polarise the carbonate ion less, so the carbonates become more stable to heat down the group (BeCO₃ decomposes near room temperature, BaCO₃ only above 1300 °C). Hydroxide solubility and basicity increase, and sulphate solubility decreases, down the group.