Unit 6 Gaseous State

Practice questions

Hydrogen at room temperature warms up instead of cooling when it expands through a throttle valve. What must be done to liquefy it by the Joule-Thomson method?

  1. Raise its pressure above its critical pressure at room temperature.
  2. Heat it above its inversion temperature first.
  3. Pre-cool it below its inversion temperature, then expand it repeatedly.
  4. Mix it with helium.
Answer and explanation

Answer: C

A gas cools on Joule-Thomson expansion only below its inversion temperature. Hydrogen's is about 200 K, below room temperature, so it is first pre-cooled (for example with liquid nitrogen) and then expanded repeatedly. Room temperature is also far above its critical temperature (33 K), so pressure alone cannot liquefy it.

Assertion (A): The critical temperature of CO₂ is 304 K, so CO₂ can be liquefied above 304 K by applying high pressure. Reason (R): At constant temperature, the volume of a given mass of gas is directly proportional to its pressure.

  1. Both A and R are true, and R is the correct explanation of A.
  2. Both A and R are true, but R is not the correct explanation of A.
  3. A is true, but R is false.
  4. Both A and R are false.
Answer and explanation

Answer: D

A is false: above its critical temperature a gas cannot be liquefied however great the pressure. R is false too: by Boyle's law volume is inversely, not directly, proportional to pressure.

A gas has a = 4.17 dm⁶ atm mol⁻² and b = 0.0371 dm³ mol⁻¹. What is its critical temperature? (R = 0.0821 dm³ atm mol⁻¹ K⁻¹)

  1. 1369 K
  2. 203 K
  3. 406 K
  4. 812 K
Answer and explanation

Answer: C

Tc = 8a/27Rb = (8 × 4.17) ÷ (27 × 0.0821 × 0.0371) = 33.36 ÷ 0.08224 = 406 K, close to the measured value for ammonia (405.5 K). 1369 K is a/Rb, which leaves out the factor 8/27.

Which statement about the compressibility factor Z is correct?

  1. Z is always 1 for real gases at room temperature.
  2. Z < 1 means the molecules' own volume dominates.
  3. Below its Boyle temperature, Z of a gas first falls below 1 and then rises above 1 as pressure increases.
  4. Z does not depend on temperature.
Answer and explanation

Answer: C

Below the Boyle temperature, attractions dominate at moderate pressure (Z < 1); at high pressure the molecular volume dominates (Z > 1), so Z passes through a minimum. Z < 1 means attractions dominate, and Z does change with temperature.

What are the units of the van der Waals constants b and a respectively?

  1. mol dm⁻³ and dm³ atm mol⁻¹
  2. dm³ mol⁻¹ and dm⁶ atm mol⁻²
  3. dm³ mol and dm⁶ atm mol²
  4. both are dimensionless
Answer and explanation

Answer: B

nb is a volume, so b has units of volume per mole (dm³ mol⁻¹). an²/V² is a pressure, so a = P × V²/n², which is atm dm⁶ mol⁻².

The van der Waals constant a values (dm⁶ atm mol⁻²) are O₂ 1.360, N₂ 1.390, NH₃ 4.170 and CH₄ 2.253. Which gas is the most easily liquefied?

  1. NH₃
  2. O₂
  3. N₂
  4. CH₄
Answer and explanation

Answer: A

The constant a measures the attraction between molecules. NH₃ has by far the largest a (its molecules attract strongly, partly through hydrogen bonding), so it has the highest critical temperature and liquefies most easily.

When NH₃ and HCl diffuse towards each other from opposite ends of a long tube, where does the white ring of NH₄Cl first form?

  1. At the centre of the tube
  2. Nearer the HCl end
  3. Nearer the NH₃ end
  4. Along the whole tube at once
Answer and explanation

Answer: B

NH₃ (17 g mol⁻¹) is lighter than HCl (36.5 g mol⁻¹), so it diffuses faster and travels further before the two gases meet. The ring forms closer to the HCl end.

Equal moles of H₂ and O₂ are placed in a container with a pinhole. What fraction of the oxygen escapes in the time it takes half the hydrogen to escape?

  1. 1/8
  2. 1/2
  3. 1/4
  4. 3/8
Answer and explanation

Answer: A

r(O₂)/r(H₂) = √(2/32) = 1/4. In the same time oxygen escapes at a quarter of hydrogen's rate. Half the hydrogen escapes, so 1/2 × 1/4 = 1/8 of the oxygen escapes.

Hydrogen diffuses 3√3 times as fast as a hydrocarbon CₙH₂ₙ₋₂ under the same conditions. What is n? (C = 12, H = 1)

  1. 3
  2. 4
  3. 8
  4. 1
Answer and explanation

Answer: B

r(H₂)/r(X) = √(M(X)/2) = 3√3, so M(X)/2 = 27 and M(X) = 54 g mol⁻¹. For CₙH₂ₙ₋₂: 12n + 2n − 2 = 54, so 14n = 56 and n = 4 (C₄H₆).

A tank contains 52.5 g of O₂ and 65.1 g of CO₂ at a total pressure of 9.21 atm. What is the partial pressure of oxygen? (O = 16, C = 12)

  1. 4.37 atm
  2. 4.61 atm
  3. 5.26 atm
  4. 4.84 atm
Answer and explanation

Answer: D

n(O₂) = 52.5 ÷ 32 = 1.641 mol; n(CO₂) = 65.1 ÷ 44 = 1.480 mol; total = 3.121 mol. x(O₂) = 1.641 ÷ 3.121 = 0.526, so p(O₂) = 0.526 × 9.21 = 4.84 atm. Check with the other gas: x(CO₂) = 0.474 and p(CO₂) = 4.37 atm; 4.84 + 4.37 = 9.21 atm. 4.37 atm is the partial pressure of CO₂, not O₂.

25 g each of HF, HCl, HBr and HI are taken at the same temperature and pressure. Which occupies the smallest volume?

  1. HF
  2. HCl
  3. HBr
  4. HI
Answer and explanation

Answer: D

At fixed T and P, V ∝ n = m/M. With equal masses, the gas with the largest molar mass has the fewest moles: HI (128 g mol⁻¹), so it has the smallest volume.

What is the density of nitrogen at 227 °C and 5.00 atm? (N = 14, R = 0.082 dm³ atm mol⁻¹ K⁻¹)

  1. 1.40 g dm⁻³
  2. 3.41 g dm⁻³
  3. 6.83 g dm⁻³
  4. 0.29 g dm⁻³
Answer and explanation

Answer: B

d = PM/RT with T = 500 K and M(N₂) = 28 g mol⁻¹: d = (5.00 × 28) ÷ (0.082 × 500) = 140 ÷ 41 = 3.41 g dm⁻³. Using M = 14 for atomic nitrogen gives half this value.

If both the kelvin temperature and the volume of a fixed amount of ideal gas are doubled, the pressure becomes

  1. 4P
  2. 2P
  3. P/2
  4. P
Answer and explanation

Answer: D

P = nRT/V. Doubling T doubles the numerator and doubling V doubles the denominator, so P is unchanged.

A gas sample has a volume of 3.80 dm³ at an unknown temperature. Cooled to 0 °C at constant pressure, its volume becomes 2.27 dm³. What was its first temperature?

  1. 457 K
  2. 163 K
  3. 273 K
  4. 184 °C
Answer and explanation

Answer: A

V₁/T₁ = V₂/T₂, so T₁ = T₂ × V₁/V₂ = 273 K × 3.80/2.27 = 273 × 1.674 = 457 K (about 184 °C). Note that 184 °C is not 184 K.

A bubble of volume 1.5 mL at the bottom of a lake (4.0 atm, 6 °C) rises to the surface (1.0 atm, 25 °C). What is its volume at the surface?

  1. 6.0 mL
  2. 0.40 mL
  3. 6.4 mL
  4. 25 mL
Answer and explanation

Answer: C

Use P₁V₁/T₁ = P₂V₂/T₂ with T₁ = 279 K and T₂ = 298 K. V₂ = 1.5 × (4.0/1.0) × (298/279) = 6.0 × 1.068 = 6.41 mL. 6.0 mL ignores the temperature rise.

Why does an ideal gas show no cooling when it expands through a valve into a low-pressure region?

  1. It is always above its inversion temperature.
  2. Its molecules do work equal to the kinetic energy lost.
  3. Its molecules exert no attractive forces on one another.
  4. Its molecules collide without losing energy.
Answer and explanation

Answer: C

Joule-Thomson cooling happens because molecules use kinetic energy to move apart against their attractions. An ideal gas has no attractions (a = 0, so Ti = 2a/Rb = 0), so no energy is used and the temperature does not change.

A gas has a = 1.39 dm⁶ atm mol⁻² and b = 0.0391 dm³ mol⁻¹. What is its inversion temperature? (R = 0.0821 dm³ atm mol⁻¹ K⁻¹)

  1. 433 K
  2. 128 K
  3. 866 K
  4. 1732 K
Answer and explanation

Answer: C

Ti = 2a/Rb = (2 × 1.39) ÷ (0.0821 × 0.0391) = 2.78 ÷ 0.003210 = 866 K. 433 K forgets the factor 2. For comparison, Tc = 8a/27Rb = 11.12 ÷ 0.08667 = 128 K, and 866 ÷ 128 ≈ 6.75 = 27/4.

Using the van der Waals equation, what is the critical volume of a gas with b = 0.0391 dm³ mol⁻¹?

  1. 0.0130 dm³ mol⁻¹
  2. 0.1173 dm³ mol⁻¹
  3. 0.0782 dm³ mol⁻¹
  4. 0.3519 dm³ mol⁻¹
Answer and explanation

Answer: B

Vc = 3b = 3 × 0.0391 = 0.1173 dm³ mol⁻¹ (117.3 cm³ mol⁻¹). 0.0130 is b/3, a common slip.

Four gases have nearly the same b, and their a values are in the order Q < R < S < P. Which is the most easily liquefied?

  1. Q
  2. R
  3. S
  4. P
Answer and explanation

Answer: D

With b fixed, Tc = 8a/27Rb rises with a. P has the largest a, so the strongest attractions and the highest critical temperature, and it liquefies most easily.

The critical temperature of CO₂ is 304.2 K. Which statement is correct?

  1. CO₂ can be liquefied at 320 K if enough pressure is applied.
  2. CO₂ cannot be liquefied at any temperature above 304.2 K, however high the pressure.
  3. CO₂ liquefies on its own when cooled to 304.2 K at 1 atm.
  4. CO₂ is a liquid at all temperatures below 304.2 K.
Answer and explanation

Answer: B

Critical temperature is the temperature above which a gas cannot be liquefied by pressure alone. Below Tc it can be liquefied, but only if the pressure is high enough; at 1 atm CO₂ does not form a liquid.

Privacy · Terms · Refunds · Delivery