Unit 9 Map and Scale

Practice questions

A map at 1 : 32,000,000 has squares of 0.5 cm and is enlarged to 1 : 16,000,000. What is the side of the new squares?

  1. 1 cm
  2. 2 cm
  3. 0.25 cm
  4. 4 cm
Answer and explanation

Answer: A

New side = 0.5 × 32,000,000 ÷ 16,000,000 = 0.5 × 2 = 1 cm. Check: 0.5 cm × 320 km = 160 km; 1 cm × 160 km = 160 km.

What is the quickest check that new squares have been calculated correctly?

  1. The new squares must always be 2 cm
  2. The number of squares must double
  3. Each square must represent the same ground distance on both maps
  4. The title must change
Answer and explanation

Answer: C

A square on the new map must cover exactly the same ground as its matching square on the original.

A map is enlarged so that its scale changes from 1 : 500,000 to 1 : 250,000. Its area on paper becomes:

  1. 2 times
  2. 4 times
  3. half
  4. the same
Answer and explanation

Answer: B

The scale factor is 500,000 ÷ 250,000 = 2, so area becomes 2² = 4 times.

A map at 1 : 6,000,000 with 1 cm squares is enlarged to 1 : 2,000,000. The new squares have side:

  1. 2 cm
  2. 1/3 cm
  3. 6 cm
  4. 3 cm
Answer and explanation

Answer: D

New side = 1 × 6,000,000 ÷ 2,000,000 = 3 cm. Check: 1 cm × 60 km = 60 km; 3 cm × 20 km = 60 km.

Which is the most common method of measuring area on a map, according to the textbook?

  1. The square method
  2. The rotameter method
  3. The thread method
  4. The compass method
Answer and explanation

Answer: A

The textbook calls the square method the most common method; thread and rotameter measure lengths.

On 1 cm squares at a scale of 1 cm to 5 km, a lake covers 6 full squares and 4 half squares. Its area is:

  1. 40 km²
  2. 200 km²
  3. 8 km²
  4. 50 km²
Answer and explanation

Answer: B

Squares = 6 + 4 × ½ = 8. Each square represents 5 × 5 = 25 km². 8 × 25 = 200 km². Using 5 km² per square (40 km²) is the common error.

On a map of RF 1 : 200,000, a winding road measured with a thread is 9.5 cm. Its length is:

  1. 9.5 km
  2. 1.9 km
  3. 95 km
  4. 19 km
Answer and explanation

Answer: D

1 cm represents 200,000 cm = 2 km. 9.5 × 2 = 19 km.

In a bar scale, where is the 0 usually written?

  1. At the end of the first (left) primary division
  2. At the extreme right end
  3. At the extreme left end
  4. In the middle of the line
Answer and explanation

Answer: A

Zero is placed at the end of the first division so that the left division can carry the secondary units and the primaries are numbered to the right.

For a bar scale at RF 1 : 40,000 showing 6 km, the line should be:

  1. 6 cm
  2. 24 cm
  3. 15 cm
  4. 40 cm
Answer and explanation

Answer: C

1 cm represents 40,000 cm = 0.4 km. 6 ÷ 0.4 = 15 cm, which also matches the conventional length.

Convert RF 1 : 126,720 into a statement in the English system.

  1. 1 inch represents 1 mile
  2. 1 inch represents 2 miles
  3. 1 inch represents 12 miles
  4. 1 inch represents 20 miles
Answer and explanation

Answer: B

126,720 ÷ 63,360 = 2, so 1 inch represents 2 miles.

Convert '4 cm represents 1 km' into an RF.

  1. 1 : 25,000
  2. 1 : 40,000
  3. 1 : 400,000
  4. 1 : 4,000
Answer and explanation

Answer: A

1 km = 100,000 cm. 4 : 100,000 reduces (÷ 4) to 1 : 25,000.

Arrange from largest to smallest scale: 1 : 1,000,000; 1 : 25,000; 1 : 250,000.

  1. 1 : 1,000,000; 1 : 250,000; 1 : 25,000
  2. 1 : 250,000; 1 : 25,000; 1 : 1,000,000
  3. 1 : 25,000; 1 : 1,000,000; 1 : 250,000
  4. 1 : 25,000; 1 : 250,000; 1 : 1,000,000
Answer and explanation

Answer: D

The smaller the denominator, the larger the scale: 25,000 < 250,000 < 1,000,000.

Which statement about the representative fraction is correct?

  1. It has no units, so it can be read in any system
  2. It must always be in kilometres
  3. It stays correct after photocopying at a larger size
  4. Its numerator is the ground distance
Answer and explanation

Answer: A

The RF is a unitless ratio, with the map distance as numerator. Only the bar scale remains valid after enlargement.

Where is the north arrow conventionally placed?

  1. Bottom left corner
  2. In the legend box
  3. Top right corner
  4. Outside the frame at the bottom right
Answer and explanation

Answer: C

The textbook says the arrow pointing north is placed at the top right corner of the map.

A student's map has a title, a legend and a scale. Which two basic components named in the textbook are still missing?

  1. Contours and grid
  2. Direction and source
  3. Isobars and legend
  4. Colour and border
Answer and explanation

Answer: B

The basic components are title, legend, direction, scale and source. Direction (north arrow) and source are missing.

If a map is reduced so that all lengths are halved, the scale factor is:

  1. ½
  2. 2
  3. ¼
  4. 4
Answer and explanation

Answer: A

The scale factor is the number every length is multiplied by. Halving means a factor of ½; the area factor would be ¼.

When a map is enlarged by the square method, the number of squares in the new network is:

  1. doubled
  2. halved
  3. always 100
  4. the same as on the original
Answer and explanation

Answer: D

The textbook says the number of squares stays the same; only their size changes.

A map at 1 : 1,000,000 with 3 cm squares is reduced to 1 : 3,000,000. What is the side of the new squares?

  1. 1 cm
  2. 9 cm
  3. 3 cm
  4. 0.33 cm
Answer and explanation

Answer: A

New side = 3 × 1,000,000 ÷ 3,000,000 = 1 cm. Check: 3 cm × 10 km = 30 km; 1 cm × 30 km = 30 km.

If every length on a map is tripled, its area on paper becomes:

  1. 3 times larger
  2. 6 times larger
  3. 9 times larger
  4. the same
Answer and explanation

Answer: C

Area changes by the square of the scale factor: 3² = 9.

A map at 1 : 2,000,000 with 1 cm squares is enlarged to 1 : 1,000,000. What is the side of the new squares?

  1. 0.5 cm
  2. 2 cm
  3. 1 cm
  4. 4 cm
Answer and explanation

Answer: B

New side = 1 × 2,000,000 ÷ 1,000,000 = 2 cm. An enlargement must give larger squares.

Privacy · Terms · Refunds · Delivery