Unit 11 Hydroxy Compounds and Ethers

Practice questions

Anisole is treated with CH₃COCl and anhydrous AlCl₃. The major product is

  1. 2-methoxyacetophenone
  2. phenyl ethanoate
  3. 3-methoxyacetophenone
  4. 4-methoxyacetophenone
Answer and explanation

Answer: D

The -OCH₃ group activates the ring and directs ortho and para. In Friedel-Crafts acylation the para product, 4-methoxyacetophenone, is the major one (less crowding than at the ortho position); the ortho isomer is minor, and meta substitution does not occur to any real extent.

tert-Butyl methyl ether reacts with one mole of HI. Which products are formed, and by which mechanism?

  1. CH₃I and (CH₃)₃COH, by SN2
  2. (CH₃)₃CI and CH₃OH, by SN1
  3. CH₃I and (CH₃)₃CI, by SN2
  4. Methanol and 2-methylpropene only, by E2
Answer and explanation

Answer: B

After protonation, the bond to the tertiary group breaks to give the stable (CH₃)₃C⁺ carbocation (SN1), which then combines with I⁻. So the products are 2-iodo-2-methylpropane and methanol, unlike an ether with two primary groups, where I⁻ attacks the smaller group.

One mole of an ether C₃H₈O reacts with two moles of HI to give two different alkyl iodides X and Y. Y, boiled with aqueous alkali, gives an alcohol that answers the iodoform test. The ether is

  1. propan-2-ol
  2. ethoxyethane
  3. methoxyethane
  4. propan-1-ol
Answer and explanation

Answer: C

The only C₃H₈O ether is methoxyethane. With two moles of HI: CH₃OC₂H₅ + 2HI → CH₃I + C₂H₅I + H₂O. C₂H₅I with alkali gives ethanol, which has the CH₃CH(OH)- unit and answers the iodoform test. The propanols are alcohols, and ethoxyethane is C₄H₁₀O.

Why can o-nitrophenol be separated from p-nitrophenol by steam distillation?

  1. o-Nitrophenol has intramolecular hydrogen bonding, so it is more volatile.
  2. p-Nitrophenol has intramolecular hydrogen bonding, so it is more volatile.
  3. o-Nitrophenol is ionic.
  4. p-Nitrophenol decomposes in steam.
Answer and explanation

Answer: A

In o-nitrophenol the OH and NO₂ groups are close enough to hydrogen-bond within one molecule, so the molecules are less associated with each other and with water: it is volatile in steam. p-Nitrophenol forms intermolecular hydrogen bonds and stays behind.

Sodium phenoxide is heated with CO₂ at 400 K and 4-7 bar, and the product is acidified. What is formed, and what is this reaction called?

  1. Salicylaldehyde, Reimer-Tiemann reaction
  2. Benzoic acid, Kolbe reaction
  3. Phenyl benzoate, Schotten-Baumann reaction
  4. Salicylic acid, Kolbe (Kolbe-Schmitt) reaction
Answer and explanation

Answer: D

The phenoxide ion is very reactive towards the weak electrophile CO₂, which enters the ortho position to give sodium salicylate; acid then gives salicylic acid (2-hydroxybenzoic acid). This is the Kolbe-Schmitt reaction.

Arrange in increasing order of acid strength: ethanol, phenol, p-cresol, p-nitrophenol.

  1. Phenol < ethanol < p-cresol < p-nitrophenol
  2. Ethanol < p-cresol < phenol < p-nitrophenol
  3. p-Nitrophenol < phenol < p-cresol < ethanol
  4. Ethanol < phenol < p-cresol < p-nitrophenol
Answer and explanation

Answer: B

Using the textbook's pKa values (larger pKa = weaker acid): ethanol 15.9, p-cresol 10.2, phenol 10.0, p-nitrophenol 7.1. The methyl group slightly weakens phenol; the para nitro group strongly strengthens it.

Glycerol is heated with KHSO₄. The product, and the number of water molecules lost per molecule, are

  1. Acrolein (prop-2-enal), 2
  2. Glyceraldehyde, 1
  3. Oxalic acid, 3
  4. Nitroglycerine, 3
Answer and explanation

Answer: A

Dehydration of glycerol gives acrolein: C₃H₈O₃ → CH₂=CHCHO + 2H₂O. Check: C 3; H 8 = 4 + 4; O 3 = 1 + 2. Nitroglycerine needs nitric acid, not KHSO₄.

0.37 g of a monohydric alcohol reacts with excess CH₃MgI to give 112 mL of methane at 273 K and 1 atm. With PCC it gives a compound that answers the silver mirror test. The alcohol could be

  1. 2-methylpropan-2-ol
  2. butan-2-ol
  3. propan-1-ol
  4. butan-1-ol
Answer and explanation

Answer: D

Moles of CH₄ = 112 ÷ 22 400 = 0.0050 mol = moles of OH groups, so molar mass = 0.37 ÷ 0.0050 = 74 g mol⁻¹: C₄H₉OH. A silver mirror means PCC gave an aldehyde, so the alcohol is primary. Butan-1-ol fits (2-methylpropan-1-ol would also fit, but it is not offered). Butan-2-ol and 2-methylpropan-2-ol are 2° and 3°, and propan-1-ol has M = 60.

Which pair of reagents oxidises a primary alcohol only as far as the aldehyde?

  1. Excess acidified K₂Cr₂O₇, or acidified KMnO₄
  2. Conc. HNO₃, or HIO₄
  3. PCC, or DMSO with oxalyl chloride then triethylamine
  4. LiAlH₄, or NaBH₄
Answer and explanation

Answer: C

PCC and the Swern reagents (DMSO, oxalyl chloride, Et₃N) are mild and stop at the aldehyde. Strong oxidants such as excess dichromate or permanganate continue to the acid; LiAlH₄ and NaBH₄ are reducing agents.

Neopentyl alcohol, (CH₃)₃CCH₂OH, is treated with SOCl₂ in pyridine. Which statement is correct?

  1. It gives (CH₃)₃CCH₂Cl, with HCl and SO₂ as gaseous by-products.
  2. It gives an alkene because it is a 3° alcohol.
  3. No reaction occurs because there is no α-hydrogen.
  4. It gives a ketone.
Answer and explanation

Answer: A

Neopentyl alcohol is a primary alcohol (its OH carbon is bonded to one carbon). Thionyl chloride replaces OH by Cl: (CH₃)₃CCH₂OH + SOCl₂ → (CH₃)₃CCH₂Cl + HCl + SO₂. The gaseous by-products make the product easy to purify.

Which alcohol reacts fastest with HBr, and by which mechanism?

  1. Ethanol, SN2
  2. 2-Methylpropan-2-ol, SN1
  3. Propan-2-ol, SN2
  4. Methanol, SN1
Answer and explanation

Answer: B

After protonation, 2-methylpropan-2-ol loses water to give the stable tertiary carbocation, which Br⁻ captures quickly: SN1. Reactivity of alcohols with HX is 3° > 2° > 1°; primary alcohols react more slowly by SN2.

What is the major product when 2-methylbutan-2-ol is heated with concentrated H₂SO₄?

  1. 2-Methylbut-1-ene
  2. 3-Methylbut-1-ene
  3. 2-Methylbut-2-ene
  4. Pent-2-ene
Answer and explanation

Answer: C

The 3° carbocation (CH₃)₂C⁺CH₂CH₃ can lose H from a CH₃ (giving 2-methylbut-1-ene, two alkyl groups on C=C) or from the CH₂ (giving (CH₃)₂C=CHCH₃, three alkyl groups). By Saytzeff's rule the more substituted 2-methylbut-2-ene is the major product.

An alcohol C₄H₁₀O gives a blue colour in Victor Meyer's test. Which is it?

  1. Butan-1-ol
  2. 2-Methylpropan-1-ol
  3. 2-Methylpropan-2-ol
  4. Butan-2-ol
Answer and explanation

Answer: D

A blue colour means a secondary alcohol. Of the four C₄H₁₀O alcohols, only butan-2-ol, CH₃CH(OH)CH₂CH₃, is secondary. Butan-1-ol and 2-methylpropan-1-ol are primary (red) and 2-methylpropan-2-ol is tertiary (colourless).

2-Methylbut-2-ene is converted to an alcohol (i) by acid-catalysed hydration and (ii) by hydroboration-oxidation. The major products are respectively

  1. 3-methylbutan-2-ol and 2-methylbutan-2-ol
  2. 2-methylbutan-2-ol and 3-methylbutan-2-ol
  3. 2-methylbutan-2-ol in both
  4. 2-methylbutan-1-ol and 3-methylbutan-1-ol
Answer and explanation

Answer: B

(CH₃)₂C=CHCH₃. Acid hydration follows Markownikoff's rule: OH goes to the more substituted carbon, giving (CH₃)₂C(OH)CH₂CH₃, 2-methylbutan-2-ol. Hydroboration is anti-Markownikoff: OH goes to the less substituted carbon, giving (CH₃)₂CHCH(OH)CH₃, 3-methylbutan-2-ol.

Which Grignard reaction gives butan-2-ol after hydrolysis?

  1. CH₃CH₂MgBr + CH₃CHO
  2. CH₃MgBr + HCHO
  3. CH₃MgBr + CH₃COCH₃
  4. CH₃CH₂MgBr + HCHO
Answer and explanation

Answer: A

Butan-2-ol is CH₃CH(OH)CH₂CH₃, a 2° alcohol, so it comes from an aldehyde other than methanal. Ethylmagnesium bromide adds to ethanal: CH₃CH₂MgBr + CH₃CHO → CH₃CH(OMgBr)CH₂CH₃, which hydrolyses to butan-2-ol (2 + 2 = 4 carbons). HCHO would give 1° alcohols and propanone a 3° alcohol.

Why should a bottle of diethyl ether that has stood in air for a long time never be distilled to dryness?

  1. Ether polymerises on heating.
  2. Ether is converted into ethanol.
  3. Explosive peroxides formed by autoxidation concentrate in the residue.
  4. Ether reacts with glass.
Answer and explanation

Answer: C

Ethers slowly react with atmospheric oxygen to form hydroperoxides and dialkyl peroxides, which are explosive. They are less volatile than the ether, so they collect in the residue as it is distilled.

Ethoxyethane is heated with excess HI. The final organic product is

  1. ethanol only
  2. iodoethane and ethanol
  3. ethene
  4. iodoethane only
Answer and explanation

Answer: D

First (C₂H₅)₂O + HI → C₂H₅I + C₂H₅OH. With excess HI, the ethanol is converted too: C₂H₅OH + HI → C₂H₅I + H₂O. So two molecules of iodoethane are the final product.

Methoxybenzene (anisole) is heated with HI. The products are

  1. iodobenzene and methanol
  2. phenol and iodomethane
  3. benzene and methanol
  4. iodobenzene and iodomethane
Answer and explanation

Answer: B

The aryl C-O bond has partial double-bond character and an sp² carbon, which iodide cannot attack. So the O-CH₃ bond breaks: C₆H₅OCH₃ + HI → C₆H₅OH + CH₃I.

Which pair of reactants gives 2-methoxy-2-methylpropane in good yield?

  1. Sodium methoxide and 2-bromo-2-methylpropane
  2. Methanol and 2-methylpropene with NaOH
  3. Sodium tert-butoxide and bromomethane
  4. Methanol and tert-butyl alcohol at 443 K
Answer and explanation

Answer: C

Williamson synthesis needs SN2 at an unhindered carbon, so use the tertiary alkoxide with the methyl halide: (CH₃)₃CONa + CH₃Br → (CH₃)₃COCH₃ + NaBr. Sodium methoxide with a tertiary bromide gives mainly 2-methylpropene by elimination.

Why does 1-methoxypentane boil far lower than hexan-1-ol, although their molar masses are almost equal?

  1. Ethers cannot form hydrogen bonds between their own molecules.
  2. Ethers are ionic.
  3. Ethers have no dipole moment.
  4. Hexan-1-ol has a lower molar mass.
Answer and explanation

Answer: A

An ether has no hydrogen bonded to oxygen, so its molecules cannot hydrogen-bond to each other; only weaker dipole and dispersion forces act. Hexan-1-ol molecules are hydrogen-bonded, which raises the boiling point (430 K against 373 K in the textbook).

Privacy · Terms · Refunds · Delivery