Unit 12 Carbonyl Compounds and Carboxylic Acids

Practice questions

Ethanamide is heated with P₂O₅, and the product is hydrolysed completely with acid. What is the final organic product?

  1. Methanamine
  2. Ethanamine
  3. Ethanoic acid
  4. Ethyl ethanoate
Answer and explanation

Answer: C

P₂O₅ dehydrates CH₃CONH₂ to CH₃C≡N. Complete acid hydrolysis of the nitrile gives CH₃COOH (and NH₄⁺), so the final product is ethanoic acid.

Why is ethanoic anhydride often preferred to ethanoyl chloride for acetylation?

  1. It is more reactive than the acid chloride
  2. It reacts more gently and does not release corrosive HCl
  3. It cannot be hydrolysed by water
  4. It gives a product with one carbon fewer
Answer and explanation

Answer: B

Anhydrides sit below acid chlorides in reactivity, so the reaction is easier to control, and the by-product is acetic acid rather than HCl. They are still hydrolysed by water, though slowly.

Formic acid (pKa 3.75) is compared with acetic acid (pKa 4.76). About how many times larger is Ka of formic acid?

  1. About 10 times
  2. About 1.3 times
  3. About 100 times
  4. About 1000 times
Answer and explanation

Answer: A

The ratio of Ka values is 10^(4.76 − 3.75) = 10^1.01 ≈ 10.2, about 10 times. The +I methyl group in acetic acid weakens it.

How many moles of hydrogen gas are released when 0.40 mol of ethanoic acid reacts completely with sodium?

  1. 0.40 mol
  2. 0.80 mol
  3. 0.10 mol
  4. 0.20 mol
Answer and explanation

Answer: D

2CH₃COOH + 2Na → 2CH₃COONa + H₂: two moles of acid give one mole of H₂. So 0.40 mol acid gives 0.40 ÷ 2 = 0.20 mol H₂.

n-Propylbenzene is oxidised with hot acidified KMnO₄. What is the aromatic product?

  1. 3-Phenylpropanoic acid
  2. Benzoic acid
  3. Phenylethanoic acid
  4. Benzaldehyde
Answer and explanation

Answer: B

Strong oxidation removes the whole side chain except the carbon attached to the ring, which becomes –COOH, whatever the chain length. The product is C₆H₅COOH, benzoic acid.

Which statement about carboxylic acids is correct?

  1. They form oximes with hydroxylamine as readily as ketones do
  2. Sodium borohydride reduces them to primary alcohols
  3. Resonance makes the carboxyl carbon less electrophilic than a ketone's carbonyl carbon
  4. Benzoic acid readily undergoes Friedel-Crafts alkylation
Answer and explanation

Answer: C

Lone-pair donation from the –OH oxygen reduces the δ⁺ on the carboxyl carbon, so acids do not give typical carbonyl addition reactions. NaBH₄ does not reduce –COOH (LiAlH₄ does), and the deactivated ring of benzoic acid does not undergo Friedel-Crafts reactions.

What is the product of the Claisen-Schmidt condensation of benzaldehyde with ethanal?

  1. C₆H₅CH=CHCHO
  2. C₆H₅CH=CHCOOH
  3. C₆H₅CH(OH)COC₆H₅
  4. C₆H₅CH=NC₆H₅
Answer and explanation

Answer: A

The enolate of ethanal adds to benzaldehyde and the product loses water, giving C₆H₅CH=CHCHO, cinnamaldehyde. The acid is the Perkin or Knoevenagel product, benzoin is from KCN, and the imine is a Schiff's base.

Benzaldehyde reacts with 50% NaOH. One product reacts with sodium metal to release hydrogen. Which product is it?

  1. Sodium benzoate
  2. Benzyl alcohol
  3. Benzoin
  4. Benzoic acid
Answer and explanation

Answer: B

Cannizzaro gives benzyl alcohol and sodium benzoate. The alcohol has an O–H, so it reacts with sodium: 2C₆H₅CH₂OH + 2Na → 2C₆H₅CH₂ONa + H₂.

Which compound gives both aldol condensation with dilute alkali and a silver mirror with Tollens' reagent?

  1. Benzaldehyde
  2. Methanal
  3. Propanone
  4. Ethanal
Answer and explanation

Answer: D

Aldol needs an α-hydrogen and Tollens needs an aldehyde. Ethanal is an aldehyde with three α-hydrogens. Benzaldehyde and methanal have no α-H; propanone is not an aldehyde.

Compound X, C₃H₆O, gives a 2,4-DNP derivative and a positive iodoform test, but does not reduce Tollens' reagent. What is X?

  1. Propanal
  2. Prop-2-en-1-ol
  3. Propanone
  4. Methoxyethene
Answer and explanation

Answer: C

A 2,4-DNP derivative shows a C=O; no reaction with Tollens' reagent rules out an aldehyde, so X is a ketone; the iodoform test needs CH₃CO–. CH₃COCH₃, propanone, fits all three.

Butanone is heated with zinc amalgam and concentrated HCl. What is formed?

  1. Butane
  2. Butan-2-ol
  3. Butanoic acid
  4. But-2-ene
Answer and explanation

Answer: A

Clemmensen reduction converts C=O into CH₂: CH₃COCH₂CH₃ + 4[H] → CH₃CH₂CH₂CH₃ + H₂O, butane. NaBH₄ or LiAlH₄ would give butan-2-ol instead.

Ethanal reacts with HCN and the product is hydrolysed with acid. What is the final product?

  1. Propanoic acid
  2. 3-Hydroxybutanal
  3. Ethanoic acid
  4. 2-Hydroxypropanoic acid
Answer and explanation

Answer: D

HCN adds to give CH₃CH(OH)CN. Acid hydrolysis turns –CN into –COOH, giving CH₃CH(OH)COOH, 2-hydroxypropanoic acid (lactic acid).

Which pair of reactions both give aldehydes from nitriles?

  1. Rosenmund and Etard
  2. Clemmensen and Wolff-Kishner
  3. Stephen's reaction and DIBAL-H reduction
  4. Gattermann-Koch and Friedel-Crafts
Answer and explanation

Answer: C

Both Stephen's reaction (SnCl₂/HCl) and DIBAL-H reduce R–C≡N to an imine, which hydrolysis turns into RCHO. Rosenmund starts from an acid chloride and Etard from toluene.

An alkene gives one mole of propanone and one mole of ethanal on reductive ozonolysis. What is the alkene?

  1. 2-Methylbut-2-ene
  2. Pent-2-ene
  3. 2-Methylbut-1-ene
  4. But-2-ene
Answer and explanation

Answer: A

Join the two carbonyl carbons with a double bond: (CH₃)₂C=O and O=CHCH₃ come from (CH₃)₂C=CHCH₃, which is 2-methylbut-2-ene. Pent-2-ene would give ethanal and propanal.

Which reagent converts a primary alcohol into an aldehyde without further oxidation to the acid?

  1. Hot alkaline KMnO₄
  2. PCC
  3. Concentrated HNO₃
  4. Zn-Hg and HCl
Answer and explanation

Answer: B

Pyridinium chlorochromate is a mild oxidant that stops at the aldehyde. KMnO₄ and HNO₃ go on to the acid, and Zn-Hg/HCl is a reducing agent.

Propanamide, CH₃CH₂CONH₂, is warmed with Br₂ and KOH. What is the organic product?

  1. Propanamine
  2. Ethanamine
  3. Propanenitrile
  4. Propanoic acid
Answer and explanation

Answer: B

In Hoffmann degradation the amine has one carbon fewer than the amide: CH₃CH₂CONH₂ → CH₃CH₂NH₂, ethanamine. The carbonyl carbon leaves as K₂CO₃.

Ethyl ethanoate is treated with sodium ethoxide. What is the organic product besides ethanol?

  1. Ethyl acetoacetate
  2. Ethanamide
  3. Ethanoyl chloride
  4. Butanoic acid
Answer and explanation

Answer: A

This is Claisen condensation: an ester with α-hydrogens condenses with itself in strong base to give the β-keto ester CH₃COCH₂COOC₂H₅, ethyl acetoacetate.

Which is the correct order of reactivity towards nucleophiles?

  1. Amide > ester > anhydride > acid chloride
  2. Ester > acid chloride > amide > anhydride
  3. Anhydride > acid chloride > ester > amide
  4. Acid chloride > anhydride > ester > amide
Answer and explanation

Answer: D

Cl⁻ is the weakest base and best leaving group, and Cl shares its lone pair least with C=O, so acid chlorides are most reactive; NH₂⁻ is the strongest base and N shares its lone pair most, so amides are least reactive.

An acid has pKa = 4.20. What is its Ka?

  1. 4.20 × 10⁻⁴
  2. 6.31 × 10⁻⁵
  3. 1.58 × 10⁻⁴
  4. 6.31 × 10⁻⁴
Answer and explanation

Answer: B

Ka = 10^(−4.20) = 10^(0.80) × 10⁻⁵ = 6.31 × 10⁻⁵. This is benzoic acid's value.

Which acid is the strongest?

  1. CH₃COOH
  2. ClCH₂COOH
  3. Cl₂CHCOOH
  4. FCH₂COOH
Answer and explanation

Answer: C

Two chlorine atoms withdraw more electron density than one fluorine or one chlorine, so the carboxylate of Cl₂CHCOOH is the most stabilised. The textbook's pKa values agree: 1.26 for Cl₂CHCOOH against 2.59 (FCH₂COOH), 2.87 (ClCH₂COOH) and 4.76 (CH₃COOH).

Privacy · Terms · Refunds · Delivery