Unit 15 Chemistry in Everyday Life

Practice questions

Why are polymers such as PGA and PHBV used for surgical stitches?

  1. They are thermosetting and never change
  2. They conduct electricity
  3. They contain sulphur cross-links
  4. They are broken down by enzymes in the body and absorbed or excreted
Answer and explanation

Answer: D

These biodegradable polyesters are hydrolysed by enzymes, so the stitches disappear as the wound heals and the products are absorbed or excreted.

Which polymer is formed from a single monomer that has both an –NH₂ and a –COOH group (after ring opening)?

  1. Nylon-6
  2. Nylon-6,6
  3. Terylene
  4. Buna-N
Answer and explanation

Answer: A

Caprolactam opens to 6-aminohexanoic acid, which carries both groups, so it polymerises by itself to nylon-6. Nylon-6,6 and terylene each need two different bifunctional monomers, and Buna-N is an addition copolymer.

Novolac on further heating with methanal gives Bakelite. What change takes place?

  1. The chains are broken into monomers
  2. –CH₂– bridges cross-link the linear chains into a network
  3. Sulphur bridges form between chains
  4. Water is added to the chains
Answer and explanation

Answer: B

Novolac is a linear phenol-formaldehyde polymer. More methanal adds –CH₂– bridges at further ring positions, linking the chains into a rigid three-dimensional network, which is why Bakelite is thermosetting.

A polystyrene sample has a degree of polymerisation of 2000. What is its approximate molar mass? (Styrene C₈H₈ = 104 g mol⁻¹)

  1. 104 000 g mol⁻¹
  2. 52 000 g mol⁻¹
  3. 208 000 g mol⁻¹
  4. 2104 g mol⁻¹
Answer and explanation

Answer: C

In an addition polymer the repeat unit has the same mass as the monomer, 104 g mol⁻¹. Molar mass ≈ 2000 × 104 = 208 000 g mol⁻¹.

Which pair of monomers gives an addition copolymer?

  1. Adipic acid and hexane-1,6-diamine
  2. Phenol and methanal
  3. Ethane-1,2-diol and terephthalic acid
  4. Buta-1,3-diene and styrene
Answer and explanation

Answer: D

Butadiene and styrene add together without losing any molecule, forming the copolymer Buna-S. The other pairs react by condensation, losing water.

LDPE is branched while HDPE is linear. Which property follows from this?

  1. HDPE chains pack more closely, so HDPE is denser and melts higher
  2. LDPE is a condensation polymer
  3. HDPE is thermosetting
  4. LDPE contains fluorine
Answer and explanation

Answer: A

Linear chains can line up and pack tightly, raising density, strength and melting point. Branches keep LDPE chains apart. Both are addition thermoplastics made from ethene.

Which statement about soap micelles is correct?

  1. Micelles join into large drops because their surfaces are neutral
  2. The polar heads point into the grease
  3. The negatively charged surfaces of micelles repel one another, so the grease stays suspended
  4. Soap dissolves grease by reacting with it chemically
Answer and explanation

Answer: C

Each micelle carries –COO⁻ heads on its surface, so micelles repel each other and do not merge; the grease stays dispersed and is rinsed away. The hydrocarbon tails, not the heads, are in the grease.

A fat is a triester of glycerol. How many moles of NaOH are needed to saponify 0.25 mol of it completely?

  1. 0.25 mol
  2. 0.50 mol
  3. 0.75 mol
  4. 1.0 mol
Answer and explanation

Answer: C

Each fat molecule has three ester groups, each needing one NaOH: 3 × 0.25 = 0.75 mol NaOH, giving 0.75 mol soap and 0.25 mol glycerol.

Which compound is used to preserve pickles?

  1. BHT
  2. Saccharin
  3. Sorbitol
  4. Acetic acid
Answer and explanation

Answer: D

Acetic acid (vinegar) lowers the pH and prevents microbial growth, so it is the main preservative in pickles. BHT is an antioxidant, saccharin a sweetener and sorbitol a sugar substitute.

How many moles of CO₂ are released when 0.84 g of NaHCO₃ reacts completely with excess HCl? (NaHCO₃ = 84 g mol⁻¹)

  1. 0.020 mol
  2. 0.010 mol
  3. 0.0050 mol
  4. 0.10 mol
Answer and explanation

Answer: B

NaHCO₃ + HCl → NaCl + H₂O + CO₂: one mole of CO₂ per mole of NaHCO₃. Moles = 0.84 ÷ 84 = 0.010 mol, so 0.010 mol CO₂ (0.224 L at STP).

Which pair is correctly matched with its target in bacteria?

  1. Penicillin: DNA gyrase
  2. Ciprofloxacin: cell wall synthesis
  3. Tetracycline: 30S ribosomal subunit
  4. Erythromycin: folic acid synthesis
Answer and explanation

Answer: C

Tetracyclines bind to the 30S subunit of the bacterial ribosome. Penicillins block cell wall synthesis, ciprofloxacin inhibits DNA gyrase, and erythromycin acts on ribosomes.

Omeprazole reduces stomach acid by

  1. blocking the enzyme (proton pump) that releases acid
  2. neutralising HCl directly
  3. blocking H₁ histamine receptors
  4. killing bacteria in the stomach
Answer and explanation

Answer: A

Omeprazole and rabeprazole inhibit the proton pump enzyme that secretes acid. Bases like Mg(OH)₂ neutralise acid directly, and H₁ blockers are antihistamines for allergy.

Morphine relieves pain by activating opioid receptors. Morphine is therefore

  1. an antagonist
  2. a competitive inhibitor
  3. an allosteric inhibitor
  4. an agonist
Answer and explanation

Answer: D

A drug that binds to a receptor and switches it on, mimicking a natural messenger, is an agonist. An antagonist such as caffeine at adenosine receptors binds without activating.

Sulphanilamide stops bacterial growth but does not harm human folic acid supply in the same way. Why?

  1. Humans make folic acid from PABA faster than bacteria
  2. Sulphanilamide cannot enter human cells
  3. Humans obtain folic acid from food and do not use this bacterial pathway
  4. Sulphanilamide is an agonist in humans
Answer and explanation

Answer: C

Bacteria must make folic acid from PABA with dihydropteroate synthase, which sulphanilamide inhibits. Humans take folic acid in their diet, so blocking that enzyme does not starve human cells of it.

Which statement about the therapeutic index is correct?

  1. It is the smallest amount of a drug that is effective
  2. A drug with a larger therapeutic index has a wider margin between its effective and toxic levels
  3. It measures how fast a drug acts
  4. A smaller index always means a safer drug
Answer and explanation

Answer: B

The therapeutic index is the ratio of the highest tolerated level to the lowest effective level. The larger the ratio, the wider the safety margin.

What is the mass of the repeat unit of nylon-6, –[NH(CH₂)₅CO]–? (C = 12, H = 1, N = 14, O = 16)

  1. 131 g mol⁻¹
  2. 113 g mol⁻¹
  3. 226 g mol⁻¹
  4. 149 g mol⁻¹
Answer and explanation

Answer: B

The repeat unit is C₆H₁₁NO: 6 × 12 + 11 + 14 + 16 = 72 + 11 + 14 + 16 = 113 g mol⁻¹. It equals 6-aminohexanoic acid (131) minus one water (18).

Which polymer is biodegradable?

  1. PHBV
  2. Polythene
  3. Teflon
  4. PVC
Answer and explanation

Answer: A

PHBV, a polyester of 3-hydroxybutanoic and 3-hydroxypentanoic acids, is broken down by microorganisms. Polythene, Teflon and PVC resist biological breakdown.

Which is the monomer of neoprene?

  1. Isoprene
  2. Buta-1,3-diene
  3. Acrylonitrile
  4. Chloroprene (2-chlorobuta-1,3-diene)
Answer and explanation

Answer: D

Neoprene is made by free-radical polymerisation of chloroprene. Isoprene is the unit of natural rubber; butadiene and acrylonitrile together give Buna-N.

Why does vulcanisation make rubber stronger and more elastic?

  1. It removes the double bonds completely
  2. It converts rubber into a thermoplastic
  3. Sulphur forms cross-links between the polymer chains
  4. It adds chlorine to the chains
Answer and explanation

Answer: C

Heating with sulphur forms –S–S– bridges between the polyisoprene chains. The cross-links stop the chains slipping past each other, so the rubber is tougher and returns to shape after stretching.

What are the monomers of nylon-6,6?

  1. Hexanedioic acid and hexane-1,6-diamine
  2. Caprolactam only
  3. Ethane-1,2-diol and terephthalic acid
  4. Phenol and methanal
Answer and explanation

Answer: A

Nylon-6,6 is made from adipic (hexanedioic) acid and hexamethylenediamine (hexane-1,6-diamine), each with six carbons. Caprolactam gives nylon-6, the diol and diacid give terylene, and phenol with methanal gives Bakelite.

Privacy · Terms · Refunds · Delivery