Unit 2 p-Block Elements-I

Practice questions

Zeolites act as molecular sieves because

  1. they dissolve small molecules
  2. they contain Si=O double bonds
  3. their framework has pores and channels of nearly uniform size
  4. they are soft and flaky
Answer and explanation

Answer: C

The rigid aluminosilicate framework has tunnels and cages of almost uniform size, so it admits molecules below a certain size and excludes larger ones.

Thortveitite, Sc₂Si₂O₇, is a pyrosilicate. How many oxygen atoms does each SiO₄ unit share?

  1. Two
  2. None
  3. One
  4. Three
Answer and explanation

Answer: C

In a pyrosilicate two tetrahedra share one corner oxygen, giving [Si₂O₇]⁶⁻: each SiO₄ shares one oxygen. Charge check: 2 × 4 − 7 × 2 = −6, balanced by 2Sc³⁺.

Hydrolysis of which chlorosilane gives a cross-linked silicone?

  1. Me₂SiCl₂
  2. MeSiCl₃
  3. Me₃SiCl
  4. SiH₄
Answer and explanation

Answer: B

MeSiCl₃ gives MeSi(OH)₃, which can condense in three directions, producing a cross-linked network. Me₂SiCl₂ gives linear chains; Me₃SiCl only caps chain ends.

In Fischer–Tropsch synthesis, how many moles of H₂ are needed to make one mole of octane, C₈H₁₈, from CO?

  1. 17
  2. 16
  3. 9
  4. 8
Answer and explanation

Answer: A

For alkanes: nCO + (2n+1)H₂ → CₙH₂ₙ₊₂ + nH₂O. With n = 8: 2 × 8 + 1 = 17 mol H₂. Check H: 34 = 18 + 16.

Graphite conducts electricity but diamond does not, because

  1. graphite is denser
  2. graphite has sp³ carbon
  3. diamond has delocalised π electrons
  4. in graphite one electron per carbon is delocalised over each sheet
Answer and explanation

Answer: D

Each sp² carbon in graphite uses three electrons in σ bonds; the fourth, in an unhybridised p orbital, is delocalised over the sheet. In diamond all four electrons are fixed in σ bonds.

What mass of anhydrous aluminium chloride forms when 5.40 g of aluminium reacts completely with chlorine? (Al = 27.0, Cl = 35.5)

  1. 13.35 g
  2. 53.4 g
  3. 26.7 g
  4. 10.8 g
Answer and explanation

Answer: C

2Al + 3Cl₂ → 2AlCl₃. Moles of Al = 5.40 ÷ 27.0 = 0.200 mol, giving 0.200 mol AlCl₃. M(AlCl₃) = 27.0 + 3 × 35.5 = 133.5 g mol⁻¹. Mass = 0.200 × 133.5 = 26.7 g.

A double salt containing the period-4 alkali metal (A) loses water on heating at about 500 K to give (B). A solution of B gives a white precipitate with BaCl₂. A and B are

  1. Na; Na₂SO₄
  2. K; K₂SO₄·Al₂(SO₄)₃ (burnt alum)
  3. K; KCl
  4. Rb; Al₂O₃
Answer and explanation

Answer: B

The period-4 alkali metal is potassium; the double salt is potash alum. At about 475–500 K it loses its 24 H₂O to give anhydrous burnt alum, whose sulphate ions give white BaSO₄ with BaCl₂.

Which reaction completes correctly: B₂H₆ + 2NaOH + 2H₂O →

  1. 2NaBO₂ + 6H₂
  2. Na₂B₄O₇ + 5H₂
  3. 2NaBH₄ + O₂
  4. 2B(OH)₃ + 2Na
Answer and explanation

Answer: A

B₂H₆ + 2NaOH + 2H₂O → 2NaBO₂ + 6H₂. Check: B 2; Na 2; O 2 + 2 = 4; H 6 + 2 + 4 = 12 = 6 × 2.

Which statement about the structure of diborane is correct?

  1. All six hydrogens lie in one plane with the boron atoms.
  2. Each boron is sp² hybridised.
  3. It contains four 3c-2e bonds.
  4. The two bridging hydrogens lie above and below the plane of the other atoms.
Answer and explanation

Answer: D

The four terminal H atoms and both B atoms lie in one plane; the two bridging H atoms lie above and below it. Boron is sp³, and there are two 3c-2e bonds and four 2c-2e bonds.

A hydride of the period-2 alkali metal (A) reacts with a boron compound (B) to give a reducing agent (C). A, B and C are

  1. NaH, B₂H₆, NaBH₄
  2. LiH, BF₃, LiF
  3. LiH, B₂H₆, LiBH₄
  4. KH, H₃BO₃, KBO₂
Answer and explanation

Answer: C

The period-2 alkali metal is lithium, so A = LiH. B₂H₆ + 2LiH → 2LiBH₄; lithium borohydride is a strong reducing agent.

Boron reacts with hot concentrated nitric acid to give

  1. H₃BO₃ and NO₂
  2. B₂O₃ and NO
  3. BN and H₂O
  4. no reaction, like with HCl
Answer and explanation

Answer: A

B + 3HNO₃ → H₃BO₃ + 3NO₂. Boron does not react with hydrohalic acids, but oxidising acids convert it to boric acid.

In the reaction 2Ca₂B₆O₁₁ + 3Na₂CO₃ + H₂O → 3Na₂B₄O₇ + 3CaCO₃ + Ca(OH)₂, how many moles of borax are obtained from 1 mol of colemanite?

  1. 3 mol
  2. 1 mol
  3. 1.5 mol
  4. 2 mol
Answer and explanation

Answer: C

2 mol colemanite give 3 mol borax, so 1 mol gives 3 ÷ 2 = 1.5 mol. Boron check: 1 mol Ca₂B₆O₁₁ has 6 mol B; 1.5 mol Na₂B₄O₇ has 1.5 × 4 = 6 mol B.

Which element of group 14 shows the least tendency for catenation?

  1. Carbon
  2. Silicon
  3. Germanium
  4. Lead
Answer and explanation

Answer: D

Catenation falls sharply down the group: C >> Si > Ge ≈ Sn > Pb, because the element–element bond grows weaker as atoms get larger.

TlCl₃ is unstable and gives TlCl and Cl₂, while AlCl₃ is stable. This is best explained by

  1. the diagonal relationship
  2. the inert pair effect
  3. catenation
  4. the higher electronegativity of Tl
Answer and explanation

Answer: B

In thallium the 6s² pair is reluctant to take part in bonding, so +1 is more stable than +3; in aluminium, +3 is stable. That is the inert pair effect.

Which list gives the correct group names for groups 13, 15 and 16 respectively?

  1. Icosagens, pnictogens, chalcogens
  2. Tetragens, chalcogens, pnictogens
  3. Icosagens, chalcogens, halogens
  4. Pnictogens, tetragens, chalcogens
Answer and explanation

Answer: A

Group 13 icosagens, 14 tetragens, 15 pnictogens, 16 chalcogens, 17 halogens, 18 inert gases.

In a sheet silicate each SiO₄ tetrahedron shares three corners. What is the empirical formula of the anion?

  1. SiO₃²⁻
  2. Si₄O₁₁⁶⁻
  3. Si₂O₇⁶⁻
  4. Si₂O₅²⁻
Answer and explanation

Answer: D

Oxygen per Si = (4 − 3) + 3 × ½ = 2.5, i.e. Si₂O₅. Charge = 2(+4) + 5(−2) = −2, so (Si₂O₅)ₙ²ⁿ⁻, as in talc and mica.

Silicones are water-repellent because

  1. they contain many –OH groups
  2. the organic groups around silicon make the surface alkane-like
  3. they are ionic
  4. they contain Si=O double bonds
Answer and explanation

Answer: B

The R groups (such as methyl) surround the Si–O backbone, so water meets a hydrocarbon-like surface and is repelled.

Which statement is NOT correct?

  1. Beryl is a cyclic silicate.
  2. Mg₂SiO₄ is an orthosilicate.
  3. SiO₄⁴⁻ is the basic unit of silicates.
  4. Feldspar is not an aluminosilicate.
Answer and explanation

Answer: D

Feldspar is a three-dimensional aluminosilicate, formed when some SiO₄ units of a tecto-silicate are replaced by AlO₄ units. The other three statements are correct.

Which of these is NOT a monomer for a high molecular mass silicone polymer?

  1. Me₃SiCl
  2. PhSiCl₃
  3. MeSiCl₃
  4. Me₂SiCl₂
Answer and explanation

Answer: A

Me₃SiCl has only one Cl, so after hydrolysis it has one –OH and can join only one other unit: it ends a chain rather than building one. Me₂SiCl₂ gives chains; MeSiCl₃ and PhSiCl₃ give cross-linked polymers.

The basic structural unit of silicates is

  1. SiO₃²⁻
  2. SiO₄²⁻
  3. SiO₄⁴⁻
  4. SiO⁻
Answer and explanation

Answer: C

Every silicate is built from SiO₄ tetrahedra: Si (+4) with four O (−2 each) gives 4 − 8 = −4, so the unit is SiO₄⁴⁻.

Privacy · Terms · Refunds · Delivery