Unit 3 p-Block Elements - II
Practice questions
Which is the most easily liquefied of these gases?
- He
- Ne
- Ar
- Kr
Answer and explanation
Answer: D
Ease of liquefaction rises with the strength of London (dispersion) forces, which grow with atomic size. Of the four, krypton is the largest and has the highest boiling point.
XeF₆ on complete hydrolysis gives
- XeOF₄
- XeO₂F₂
- XeO₃
- XeO₂
Answer and explanation
Answer: C
XeF₆ + 3H₂O → XeO₃ + 6HF. Partial hydrolysis gives XeOF₄ and XeO₂F₂ on the way, but complete hydrolysis replaces all six F.
Which halogen acid reduces concentrated H₂SO₄ to H₂S?
- HF
- HCl
- HBr
- HI
Answer and explanation
Answer: D
HI is the strongest reducing agent of the halogen acids: 8HI + H₂SO₄ → 4I₂ + H₂S + 4H₂O. HBr reduces H₂SO₄ only to SO₂; HCl and HF do not reduce it.
The correct order of acidity of the oxoacids of chlorine is
- HClO < HClO₂ < HClO₃ < HClO₄
- HClO₄ < HClO₃ < HClO₂ < HClO
- HClO₃ < HClO₄ < HClO₂ < HClO
- HClO₂ < HClO < HClO₃ < HClO₄
Answer and explanation
Answer: A
More oxygen atoms on chlorine pull electron density from the O–H bond and spread the negative charge of the anion, so acidity rises from HClO (+1) to HClO₄ (+7).
Which is the strongest oxidising agent?
- Cl₂
- Br₂
- I₂
- F₂
Answer and explanation
Answer: D
Fluorine is the most electronegative element and has the highest standard reduction potential of the halogens, so it is the strongest oxidising agent.
How many moles of SO₂ are released when 0.4 mol of carbon is oxidised by hot concentrated H₂SO₄?
- 0.4 mol
- 0.8 mol
- 1.2 mol
- 0.2 mol
Answer and explanation
Answer: B
C + 2H₂SO₄ → CO₂ + 2SO₂ + 2H₂O: 2 mol SO₂ per mol C, so 0.4 mol C gives 0.8 mol SO₂. Electron check: C loses 4 e⁻, each S gains 2 e⁻.
Which reaction shows SO₂ acting as an oxidising agent?
- SO₂ + 2H₂O + Cl₂ → H₂SO₄ + 2HCl
- 2SO₂ + O₂ → 2SO₃
- 2H₂S + SO₂ → 3S + 2H₂O
- SO₂ + NaOH → NaHSO₃
Answer and explanation
Answer: C
In 2H₂S + SO₂ → 3S + 2H₂O, sulphur in SO₂ goes from +4 to 0 (reduced), so SO₂ oxidises H₂S. In the first two SO₂ is oxidised to +6; the last is just acid–base.
What is the basicity of hypophosphorous acid, H₃PO₂, and why?
- 3, because it has three H atoms
- 2, because it has two O atoms
- 1, because only one H is attached to oxygen
- 0, because it is a reducing agent
Answer and explanation
Answer: C
H₃PO₂ is H₂P(O)OH: two H atoms are bonded directly to P and are not acidic; only the one P–OH hydrogen ionises, so the basicity is 1.
The normality of a 2 M orthophosphoric acid solution is
- 6 N
- 2 N
- 4 N
- 3 N
Answer and explanation
Answer: A
H₃PO₄ has three P–OH groups, so basicity 3; normality = 2 × 3 = 6 N.
P₄O₆ reacts with cold water to give
- H₃PO₄
- H₃PO₃
- H₄P₂O₇
- HPO₃
Answer and explanation
Answer: B
P₄O₆ + 6H₂O → 4H₃PO₃. Phosphorus stays at +3, so the product is phosphorous acid. P₄O₁₀ would give H₃PO₄.
Zinc reacts with very dilute nitric acid to give ammonium nitrate. The oxidation state of nitrogen changes from
- +5 to −3
- +5 to +1
- +5 to +2
- +3 to −3
Answer and explanation
Answer: A
4Zn + 10HNO₃ → 4Zn(NO₃)₂ + NH₄NO₃ + 3H₂O. In NH₄⁺, x + 4 = +1, so N is −3; it started at +5 in HNO₃.
How many moles of NO are formed when 6 mol of copper react with dilute nitric acid?
- 2 mol
- 6 mol
- 4 mol
- 8 mol
Answer and explanation
Answer: C
3Cu + 8HNO₃ → 3Cu(NO₃)₂ + 2NO + 4H₂O: 2 mol NO per 3 mol Cu, so 6 mol Cu gives 6 × 2/3 = 4 mol NO.
In which of the following is ammonia NOT used?
- Making [Cu(NH₃)₄]²⁺, the deep blue test for Cu²⁺
- Group III analysis (with NH₄Cl)
- Tollens' reagent
- Group II analysis (H₂S in dilute HCl)
Answer and explanation
Answer: D
Group II cations are precipitated by H₂S in dilute HCl, without ammonia. Group III uses NH₄OH/NH₄Cl, Tollens' reagent is [Ag(NH₃)₂]⁺, and the blue copper test uses excess ammonia.
An element of group 15 in period 3 has the configuration
- 1s² 2s² 2p⁴
- 1s² 2s² 2p³
- 1s² 2s² 2p⁶ 3s² 3p³
- 1s² 2s² 2p⁶ 3s² 3p²
Answer and explanation
Answer: C
Period 3 means n = 3 for the valence shell; group 15 means ns² np³. That is phosphorus, 1s² 2s² 2p⁶ 3s² 3p³.
Which statement about nitrogen is true?
- It is the least electronegative element of its group.
- It has a lower ionisation enthalpy than oxygen.
- It has d orbitals available for bonding.
- It can form pπ–pπ multiple bonds with itself.
Answer and explanation
Answer: D
Nitrogen is small and forms strong pπ–pπ bonds (N≡N). It is the most electronegative member of group 15, has no d orbitals, and its ionisation enthalpy is actually higher than oxygen's (half-filled 2p³).
The shape of XeF₄ is
- tetrahedral
- square planar
- see-saw
- square pyramidal
Answer and explanation
Answer: B
Xe has 8 valence electrons; 4 bond to F and 4 remain as 2 lone pairs. Six pairs (sp³d²) take an octahedral arrangement; the two lone pairs sit opposite each other, leaving the four F atoms in a square plane.
Which compound is NOT formed?
- XeOF₄
- XeO₃
- XeF₂
- NeF₂
Answer and explanation
Answer: D
Neon has a very high ionisation energy and no accessible d orbitals; no neon compounds are known. Xenon forms XeF₂, XeO₃ and XeOF₄.
What is the hybridisation of iodine in IF₇ and its shape?
- sp³d³, pentagonal bipyramidal
- sp³d², octahedral
- sp³d, trigonal bipyramidal
- sp³, tetrahedral
Answer and explanation
Answer: A
Iodine uses all 7 valence electrons to bond to 7 F: 7 bond pairs, no lone pairs, 7 orbitals, sp³d³, pentagonal bipyramidal.
The correct order of thermal stability of the hydrogen halides is
- HI > HBr > HCl > HF
- HCl > HF > HBr > HI
- HF > HCl > HBr > HI
- HI > HCl > HF > HBr
Answer and explanation
Answer: C
Thermal stability follows bond dissociation enthalpy, which is greatest for HF and least for HI, so HF > HCl > HBr > HI.
Chlorine with hot concentrated NaOH gives
- NaCl and NaOCl
- NaCl, NaClO₃ and water
- NaClO₄ only
- NaOCl and H₂
Answer and explanation
Answer: B
3Cl₂ + 6NaOH(hot, conc.) → 5NaCl + NaClO₃ + 3H₂O. Cold dilute NaOH gives NaCl and NaOCl instead.