Unit 4 Transition and Inner Transition Elements

Practice questions

Which property is shown by actinoids but not by lanthanoids?

  1. A common +3 oxidation state
  2. Formation of oxo cations such as UO₂²⁺
  3. Filling of an f subshell
  4. Decrease in size along the series
Answer and explanation

Answer: B

Both series show +3, fill f orbitals and contract across the series. Only actinoids form oxo cations like UO₂²⁺ and NpO₂²⁺, because their 5f electrons are available for bonding and they reach higher oxidation states.

The electronic configuration of Ce⁴⁺ is

  1. [Xe]₄f¹
  2. [Xe]₄f²
  3. [Xe]
  4. [Xe]₄f¹ 5d¹
Answer and explanation

Answer: C

Ce is [Xe]₄f¹ 5d¹ 6s². Removing four electrons (6s², 5d¹, 4f¹) leaves [Xe]₄f⁰, i.e. the xenon core.

Which statement about the lanthanoids is incorrect?

  1. Europium shows a +2 oxidation state.
  2. Basicity decreases as ionic radius decreases from Pr to Lu.
  3. Ce⁴⁺ solutions are used as oxidising agents.
  4. Lanthanoid ions become larger from Ce³⁺ to Lu³⁺.
Answer and explanation

Answer: D

The lanthanoid contraction makes Ln³⁺ ions smaller, not larger, from Ce³⁺ to Lu³⁺. The other statements are correct.

In the manufacture of KMnO₄, the green compound formed by fusing MnO₂ with KOH in air is

  1. KMnO₄
  2. K₂MnO₄
  3. Mn₂O₇
  4. MnSO₄
Answer and explanation

Answer: B

2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O. Potassium manganate (Mn +6) is green; it is then oxidised to purple permanganate (Mn +7).

The correct order of increasing oxidising power is

  1. Cr₂O₇²⁻ < VO₂⁺ < MnO₄⁻
  2. MnO₄⁻ < Cr₂O₇²⁻ < VO₂⁺
  3. VO₂⁺ < Cr₂O₇²⁻ < MnO₄⁻
  4. Cr₂O₇²⁻ < MnO₄⁻ < VO₂⁺
Answer and explanation

Answer: C

Standard reduction potentials rise in the order VO₂⁺/VO²⁺ (about +1.0 V) < Cr₂O₇²⁻/Cr³⁺ (about +1.33 V) < MnO₄⁻/Mn²⁺ (about +1.51 V), so oxidising power increases VO₂⁺ < Cr₂O₇²⁻ < MnO₄⁻.

The number of moles of acidified KMnO₄ needed to oxidise 1 mol of ferrous oxalate, FeC₂O₄, is

  1. 0.6
  2. 5
  3. 3
  4. 1.5
Answer and explanation

Answer: A

Fe²⁺ → Fe³⁺ gives 1 e⁻; C₂O₄²⁻ → 2CO₂ gives 2 e⁻; total 3 e⁻. MnO₄⁻ takes 5 e⁻, so 3/5 = 0.6 mol KMnO₄.

How many moles of I₂ are liberated when 1 mol of K₂Cr₂O₇ reacts with excess acidified KI?

  1. 1
  2. 2
  3. 3
  4. 6
Answer and explanation

Answer: C

Cr₂O₇²⁻ takes 6 electrons (2Cr: +6 → +3). Each I₂ needs 2 electrons from 2I⁻. 6 ÷ 2 = 3 mol I₂.

By the Hume-Rothery rules, which condition favours a substitutional alloy?

  1. Atomic radii differ by more than 25%.
  2. Different crystal structures.
  3. A large electronegativity difference.
  4. Atomic radii differ by less than 15%, with the same crystal structure and valence.
Answer and explanation

Answer: D

A substitutional alloy needs similar sizes (less than 15% difference), the same crystal structure and valence, and nearly equal electronegativities.

The catalytic behaviour of transition metals and their compounds is mainly due to

  1. their magnetic behaviour
  2. their ability to adopt variable oxidation states and use their d orbitals
  3. their high density
  4. their high melting points
Answer and explanation

Answer: B

Catalysis relies on available d orbitals to bind reactants and on variable oxidation states to transfer electrons (as with V₂O₅ in the contact process).

An ion of a 3d metal has a spin-only moment of 2.83 BM. The number of unpaired electrons and a possible ion are

  1. 1; Cu²⁺
  2. 2; Ni²⁺
  3. 3; Cr³⁺
  4. 4; Fe²⁺
Answer and explanation

Answer: B

n(n + 2) = 2.83² ≈ 8, so n = 2 (2 × 4 = 8). Ni²⁺ (3d⁸) has 2 unpaired electrons; so do V³⁺ and Ti²⁺.

Which ion is a strong oxidising agent because its reduction gives a half-filled d subshell?

  1. Cr³⁺
  2. Fe²⁺
  3. Mn³⁺
  4. Ti³⁺
Answer and explanation

Answer: C

Mn³⁺ (3d⁴) + e⁻ → Mn²⁺ (3d⁵, half-filled), E° = +1.51 V. This large positive value makes Mn³⁺ a strong oxidant.

Which is the strongest reducing agent in water?

  1. Fe²⁺
  2. Mn²⁺
  3. Co²⁺
  4. Cr²⁺
Answer and explanation

Answer: D

E°(Cr³⁺/Cr²⁺) is negative (−0.41 V), so Cr²⁺ is readily oxidised to stable Cr³⁺ (3d³). For Mn, Fe and Co the M³⁺/M²⁺ potentials are positive (+1.51, +0.77, +1.81 V), so their M²⁺ ions are much harder to oxidise.

From IE values Ni 737, 1753, 3395, 5297 and Pt 864, 1791, 2800, 4150 kJ mol⁻¹, the energy to form Pt⁴⁺ is

  1. 9605 kJ mol⁻¹
  2. 11,182 kJ mol⁻¹
  3. 2655 kJ mol⁻¹
  4. 6950 kJ mol⁻¹
Answer and explanation

Answer: A

Sum for Pt: 864 + 1791 + 2800 + 4150 = 9605 kJ mol⁻¹, less than for Ni⁴⁺ (11,182), so Pt(IV) compounds are more stable than Ni(IV) compounds.

Which pair has nearly identical atomic radii?

  1. Ti and Zr
  2. Zr and Hf
  3. Sc and Y
  4. Cr and Mo
Answer and explanation

Answer: B

Because of the lanthanoid contraction, Hf (5d) is almost the same size as Zr (4d): textbook values 145 pm and 144 pm. Ti is much smaller (132 pm).

Which statement about the 3d series is correct?

  1. Atomic radius falls steadily from Sc to Zn.
  2. Zn has an incomplete 3d subshell.
  3. Cr and Cu have one 4s electron because d⁵ and d¹⁰ are extra stable.
  4. Melting point rises steadily from Sc to Zn.
Answer and explanation

Answer: C

Cr is 3d⁵ 4s¹ and Cu 3d¹⁰ 4s¹ because half-filled and full d subshells are extra stable. Radii are nearly constant from V to Cu, Zn is 3d¹⁰, and melting points peak mid-series.

Ce⁴⁺ is used as an oxidising agent in volumetric analysis because

  1. Ce⁴⁺ has a half-filled 4f subshell
  2. Ce⁴⁺ tends to gain an electron to reach the common +3 state
  3. Ce⁴⁺ is diamagnetic
  4. Ce⁴⁺ is radioactive
Answer and explanation

Answer: B

Although Ce⁴⁺ (4f⁰) is fairly stable, the +3 state is the most common and stable for lanthanoids, so Ce⁴⁺ readily accepts an electron (Ce⁴⁺ + e⁻ → Ce³⁺), which makes it a useful oxidant. Its 4f subshell is empty, not half-filled.

The actinoids that show the highest oxidation state of +7 are

  1. U and Th
  2. Fm and Md
  3. No and Lr
  4. Np and Pu
Answer and explanation

Answer: D

Neptunium and plutonium show +7 (for example in some oxo compounds). Th, U, Fm, Md, No and Lr do not reach +7.

Which statement is NOT correct?

  1. La(OH)₃ is less basic than Lu(OH)₃.
  2. The ionic radius of Ln³⁺ decreases along the series.
  3. La is really a transition (d-block) element.
  4. Zr and Hf have almost the same atomic radius because of the lanthanoid contraction.
Answer and explanation

Answer: A

Basicity decreases from La to Lu as the ions get smaller, so La(OH)₃ is MORE basic than Lu(OH)₃. The other three statements are correct.

Which lanthanoid ion is diamagnetic?

  1. Eu²⁺
  2. Yb²⁺
  3. Ce²⁺
  4. Sm²⁺
Answer and explanation

Answer: B

Yb²⁺ is [Xe]₄f¹⁴, all paired, so diamagnetic. Eu²⁺ (4f⁷), Sm²⁺ (4f⁶) and Ce²⁺ (4f² or 4f¹ 5d¹) have unpaired electrons.

The most common oxidation state of the lanthanoids is

  1. +2
  2. +4
  3. +3
  4. +5
Answer and explanation

Answer: C

All lanthanoids show +3, formed by losing the two 6s electrons and one 4f (or 5d) electron. +2 and +4 occur only for a few elements.

Privacy · Terms · Refunds · Delivery