Unit 5 Coordination Chemistry

Practice questions

Which use of a complex is matched correctly?

  1. Wilkinson's catalyst: polymerisation of ethene
  2. Cisplatin: softening of hard water
  3. Hypo forms Na₃[Ag(S₂O₃)₂] to remove unexposed AgBr from film
  4. Chlorophyll: an iron complex that carries oxygen
Answer and explanation

Answer: C

Sodium thiosulphate dissolves unexposed AgBr as the soluble complex Na₃[Ag(S₂O₃)₂]. Wilkinson's catalyst hydrogenates alkenes (Ziegler-Natta polymerises ethene), cisplatin is an anticancer drug, and chlorophyll is a magnesium complex; haemoglobin is the iron complex.

The instability constant of a complex ion is 2.0 × 10⁻²⁰. What is its stability constant?

  1. 2.0 × 10²⁰
  2. 5.0 × 10¹⁹
  3. 5.0 × 10⁻²¹
  4. 2.0 × 10⁻¹⁹
Answer and explanation

Answer: B

β = 1/α = 1/(2.0 × 10⁻²⁰) = 0.50 × 10²⁰ = 5.0 × 10¹⁹. A very large β means a very stable complex.

In Fe₂(CO)₉, how many carbonyl groups are bridging?

  1. None
  2. Two
  3. Three
  4. Nine
Answer and explanation

Answer: C

Diiron nonacarbonyl has three CO groups bridging the two Fe atoms and six terminal CO groups: 3 + 6 = 9 carbonyls in total, and an Fe-Fe interaction.

Which chromium(III) complex has the largest Δo?

  1. [Cr(H₂O)₆]³⁺
  2. [Cr(NH₃)₆]³⁺
  3. [CrF₆]³⁻
  4. [Cr(CN)₆]³⁻
Answer and explanation

Answer: D

The metal ion and its charge are the same, so Δo depends on the ligand. In the spectrochemical series F⁻ < H₂O < NH₃ < CN⁻, so the cyanido complex has the largest splitting.

A d⁶ complex has Δo = 13000 cm⁻¹ and P = 21000 cm⁻¹. Using the textbook's formula, what are the CFSE values for the high spin and low spin arrangements?

  1. High spin −5200 cm⁻¹; low spin +10800 cm⁻¹
  2. High spin 0; low spin −31200 cm⁻¹
  3. High spin −5200 cm⁻¹; low spin −31200 cm⁻¹
  4. High spin +5200 cm⁻¹; low spin −10800 cm⁻¹
Answer and explanation

Answer: A

Free ion d⁶ has one pair (n'p = 1). High spin t₂g⁴e_g² (1 pair): (−1.6 + 1.2)Δo + P − P = −0.4 × 13000 = −5200 cm⁻¹. Low spin t₂g⁶ (3 pairs): −2.4Δo + 3P − P = −31200 + 42000 = +10800 cm⁻¹. High spin is favoured.

What is the spin-only magnetic moment of the high spin (outer orbital) ion [Fe(H₂O)₆]²⁺?

  1. 0 BM
  2. 4.90 BM
  3. 2.83 BM
  4. 5.92 BM
Answer and explanation

Answer: B

Fe²⁺ is 3d⁶. Water is a weak field ligand here, so electrons are not forced to pair: one pair and four unpaired electrons. μs = √[4(4 + 2)] = √24 = 4.90 BM. The metal uses sp³d² hybrid orbitals.

[Ni(CN)₄]²⁻ is diamagnetic. Using VBT, what is the hybridisation of nickel in it?

  1. sp³
  2. sp³d²
  3. dsp²
  4. d²sp³
Answer and explanation

Answer: C

Ni²⁺ is 3d⁸. Strong field CN⁻ pairs the two unpaired electrons, leaving one 3d orbital empty. One 3d + one 4s + two 4p → dsp², square planar, with no unpaired electrons (diamagnetic).

Which complex of type [MA₂B₂] can show geometrical isomerism?

  1. Tetrahedral [Zn(NH₃)₂Cl₂]
  2. Square planar [Pt(NH₃)₂Cl₂]
  3. Linear [Ag(NH₃)₂]⁺
  4. Tetrahedral [NiCl₄]²⁻
Answer and explanation

Answer: B

In a square plane two Cl⁻ can be adjacent (cis) or opposite (trans). In a tetrahedron all positions are adjacent, so no cis/trans forms exist; [Ag(NH₃)₂]⁺ and [NiCl₄]²⁻ have only one kind of ligand anyway.

Which pair are coordination isomers?

  1. [Co(NH₃)₆][Cr(CN)₆] and [Cr(NH₃)₆][Co(CN)₆]
  2. [Co(NH₃)₅Br]SO₄ and [Co(NH₃)₅(SO₄)]Br
  3. [Co(NH₃)₅(NO₂)]²⁺ and [Co(NH₃)₅(ONO)]²⁺
  4. cis- and trans-[Pt(NH₃)₂Cl₂]
Answer and explanation

Answer: A

Coordination isomers need complex cation and complex anion that exchange ligands; here NH₃ and CN⁻ change metals. The other pairs show ionisation, linkage and geometrical isomerism.

Which of these complexes shows optical isomerism?

  1. trans-[Co(en)₂Cl₂]⁺
  2. [Co(NH₃)₄Cl₂]⁺
  3. [Pt(NH₃)₂Cl₂]
  4. cis-[Co(en)₂Cl₂]⁺
Answer and explanation

Answer: D

The cis form of [Co(en)₂Cl₂]⁺ has no mirror plane: its mirror image cannot be superimposed, so it exists as d and l forms. The trans form has a mirror plane; [Co(NH₃)₄Cl₂]⁺ and square planar [Pt(NH₃)₂Cl₂] also have mirror planes.

What is the formula of potassium diaquadioxalatochromate(III)?

  1. K₃[Cr(H₂O)₂(C₂O₄)₂]
  2. K₂[Cr(H₂O)₂(C₂O₄)₂]
  3. K[Cr(H₂O)₂(C₂O₄)₂]
  4. [Cr(H₂O)₂(C₂O₄)₂]K₃
Answer and explanation

Answer: C

Charge on the complex = +3 + 2(0) + 2(−2) = −1. So one K⁺ is needed: K[Cr(H₂O)₂(C₂O₄)₂]. Check: +1 − 1 = 0.

What is the IUPAC name of [Co(en)₂(NO₂)Cl]Br, in which nitrite is bound through nitrogen?

  1. Chloridobis(ethane-1,2-diamine)nitrito-κN cobaltate(III) bromide
  2. Chloridobis(ethane-1,2-diamine)nitrito-κN cobalt(III) bromide
  3. Bis(ethylenediamine)chloronitrocobalt(II) bromide
  4. Chloridobis(ethane-1,2-diamine)nitrito-κO cobalt(III) bromide
Answer and explanation

Answer: B

The complex [Co(en)₂(NO₂)Cl]⁺ is a cation, so 'cobalt', not 'cobaltate'. Nitrite through N is nitrito-κN. Oxidation state: x + 0 − 1 − 1 = +1, so x = +3. Ligands alphabetically: chlorido, ethane-1,2-diamine (bis ignored), nitrito. The anion is bromide.

What is the sum of the primary and secondary valences of Fe in K₃[Fe(C₂O₄)₃]?

  1. 9
  2. 6
  3. 3
  4. 12
Answer and explanation

Answer: A

Primary valence = oxidation state: x + 3(−2) = −3, so x = +3. Secondary valence = coordination number: three bidentate oxalate ions give 3 × 2 = 6. Sum = 3 + 6 = 9.

Arrange in order of increasing molar conductivity: [Co(NH₃)₃Cl₃], [Co(NH₃)₄Cl₂]Cl, [Co(NH₃)₆]Cl₃.

  1. [Co(NH₃)₆]Cl₃ < [Co(NH₃)₄Cl₂]Cl < [Co(NH₃)₃Cl₃]
  2. [Co(NH₃)₄Cl₂]Cl < [Co(NH₃)₃Cl₃] < [Co(NH₃)₆]Cl₃
  3. All three are equal
  4. [Co(NH₃)₃Cl₃] < [Co(NH₃)₄Cl₂]Cl < [Co(NH₃)₆]Cl₃
Answer and explanation

Answer: D

Count ions per formula unit: [Co(NH₃)₃Cl₃] is neutral (0 ions, non-electrolyte); [Co(NH₃)₄Cl₂]Cl gives 2 ions; [Co(NH₃)₆]Cl₃ gives 4 ions. More ions, higher conductivity.

50 mL of a 0.02 M solution of [Co(NH₃)₄Cl₂]Cl is treated with excess AgNO₃. How many moles of AgCl precipitate?

  1. 0.002
  2. 0.0005
  3. 0.001
  4. 0.003
Answer and explanation

Answer: C

Moles of complex = 0.02 mol L⁻¹ × 0.050 L = 0.001 mol. Only the one Cl⁻ outside the bracket ionises, so AgCl = 1 × 0.001 = 0.001 mol.

The stepwise constants for forming a hypothetical ML₃ are k₁ = 10⁵, k₂ = 10⁴ and k₃ = 10². What is log β?

  1. 11
  2. 9
  3. 20
  4. 7
Answer and explanation

Answer: A

log β = log k₁ + log k₂ + log k₃ = 5 + 4 + 2 = 11. So β = 10¹¹ and the instability constant α = 10⁻¹¹.

Which statement about bonding in metal carbonyls is correct?

  1. CO donates electrons only through its π orbitals
  2. The metal donates d electron density into the empty π* orbital of CO
  3. The M-C bond is purely ionic
  4. Bridging CO groups are bonded to only one metal atom
Answer and explanation

Answer: B

After CO donates a lone pair (σ bond), the metal back-donates electron density from a filled d orbital into the empty π* orbital of CO. This π back bonding strengthens the M-C bond. Bridging CO groups join two metal atoms.

Why is [Zn(H₂O)₆]²⁺ colourless while [Cu(H₂O)₆]²⁺ is blue?

  1. Zn²⁺ is 3d¹⁰, so no electron can be promoted from t₂g into a vacancy in e_g
  2. Zn²⁺ has no d electrons at all
  3. Water is a strong field ligand only for zinc
  4. Zinc complexes are always tetrahedral
Answer and explanation

Answer: A

A d-d transition needs a vacancy in the e_g set. Zn²⁺ (3d¹⁰) has both sets full, so no visible light is absorbed. Cu²⁺ (3d⁹) has one vacancy in e_g; it absorbs orange light and looks blue.

What is the CFSE of an octahedral d³ ion such as Cr³⁺ (no electron pairs in either field)?

  1. −0.4Δo
  2. −0.6Δo
  3. 0
  4. −1.2Δo
Answer and explanation

Answer: D

d³ in an octahedral field is t₂g³e_g⁰. CFSE = [3(−0.4) + 0(0.6)]Δo = −1.2Δo. There are no pairs, so no P terms.

For an octahedral d⁴ complex (illustrative values), Δo = 30000 cm⁻¹ and P = 22000 cm⁻¹. Which configuration is preferred?

  1. t₂g³e_g¹, high spin
  2. t₂g²e_g², high spin
  3. t₂g⁴e_g⁰, low spin
  4. t₂g¹e_g³, low spin
Answer and explanation

Answer: C

Δo is larger than P, so pairing is cheaper than promotion. Check CFSE: high spin = −0.6Δo = −18000 cm⁻¹; low spin = −1.6Δo + P = −48000 + 22000 = −26000 cm⁻¹, which is lower. So t₂g⁴e_g⁰, low spin.

Privacy · Terms · Refunds · Delivery