Unit 6 Solid State

Practice questions

When ZnO is heated it turns yellow. The best explanation is

  1. Schottky defects form and density falls
  2. It loses oxygen; extra Zn²⁺ ions and electrons occupy interstitial sites
  3. Zn²⁺ is oxidised to Zn³⁺
  4. It becomes amorphous
Answer and explanation

Answer: B

On heating, ZnO → Zn²⁺ + ½O₂ + 2e⁻. The excess Zn²⁺ and the electrons sit in interstitial positions: a metal excess defect. The trapped electrons absorb visible light, so the solid looks yellow.

A sample of iron oxide has formula Fe₀.₉₃O. What percentage of the iron is present as Fe³⁺?

  1. 7.0%
  2. 14.0%
  3. 93.0%
  4. 15.1%
Answer and explanation

Answer: D

Let Fe²⁺ = y, Fe³⁺ = 0.93 − y. 2y + 3(0.93 − y) = 2 gives 2.79 − y = 2, y = 0.79. Fe³⁺ = 0.14. Percentage = 0.14 ÷ 0.93 × 100 = 15.1%.

In an ionic solid the cation (radius 120 pm) occupies octahedral holes. What is the largest anion radius that still allows octahedral coordination?

  1. 120 ÷ 0.414 = 290 pm
  2. 120 × 0.414 = 49.7 pm
  3. 120 ÷ 0.732 = 164 pm
  4. 120 × 0.732 = 87.8 pm
Answer and explanation

Answer: A

Octahedral coordination needs r₊/r₋ of at least 0.414. The largest anion is when r₊/r₋ = 0.414: r₋ = 120 ÷ 0.414 = 290 pm. A larger anion would give a ratio below 0.414 (tetrahedral).

Oxide ions form a ccp array; Al³⁺ ions fill some octahedral voids so that the compound is neutral. What fraction of octahedral voids is filled?

  1. One-third
  2. One-half
  3. Two-thirds
  4. All of them
Answer and explanation

Answer: C

For n O²⁻ there are n octahedral voids. Neutrality needs Al : O = 2 : 3, so Al ions = 2n/3. Fraction filled = (2n/3) ÷ n = 2/3.

What is the coordination number of each sphere in hexagonal close packing?

  1. 6
  2. 8
  3. 4
  4. 12
Answer and explanation

Answer: D

Each sphere touches 6 in its own layer, 3 in the layer above and 3 in the layer below: 6 + 3 + 3 = 12. The same holds for ccp.

A metal is ccp with metallic radius 128 pm. What is the edge of its unit cell?

  1. 256 pm
  2. 362 pm
  3. 296 pm
  4. 181 pm
Answer and explanation

Answer: B

ccp is fcc, where √2 a = 4r. a = 2√2 r = 2.828 × 128 = 362.0 pm.

An element (atomic mass 108) is fcc with edge 409 pm. What is its density? (N_A = 6.022 × 10²³)

  1. 10.5 g cm⁻³
  2. 5.24 g cm⁻³
  3. 21.0 g cm⁻³
  4. 2.62 g cm⁻³
Answer and explanation

Answer: A

n = 4; a = 4.09 × 10⁻⁸ cm, a³ = 68.42 × 10⁻²⁴ cm³; a³N_A = 68.42 × 10⁻²⁴ × 6.022 × 10²³ = 41.20 cm³ mol⁻¹. ρ = 4 × 108 ÷ 41.20 = 432 ÷ 41.20 = 10.5 g cm⁻³.

CsCl has a bcc-type arrangement with edge 360 pm. What is the distance between a Cs⁺ ion and the nearest Cl⁻ ion?

  1. 360 pm
  2. 180 pm
  3. 254.6 pm
  4. 311.8 pm
Answer and explanation

Answer: D

Cs⁺ at the body centre and Cl⁻ at the corners are half a body diagonal apart: √3a/2 = 1.732 × 360 ÷ 2 = 311.8 pm.

A metal is bcc with a nearest-neighbour distance of 250 pm. What is the edge length a?

  1. 250 pm
  2. 500 pm
  3. 288.7 pm
  4. 216.5 pm
Answer and explanation

Answer: C

In bcc the nearest neighbours are a corner atom and the body-centre atom, half a body diagonal apart: d = √3a/2. So a = 2d/√3 = 500 ÷ 1.732 = 288.7 pm.

In a cubic cell X occupies corners and Y the face centres; two corner atoms are missing per cell. What is the formula?

  1. XY₃
  2. XY₄
  3. X₃Y₄
  4. X₂Y₃
Answer and explanation

Answer: B

X = 6 corners × 1/8 = 3/4; Y = 6 × 1/2 = 3. X : Y = 3/4 : 3; multiplying both by 4 gives 3 : 12 = 1 : 4. Formula XY₄.

Which crystal system has a = b = c but α = β = γ ≠ 90°?

  1. Rhombohedral
  2. Cubic
  3. Triclinic
  4. Tetragonal
Answer and explanation

Answer: A

Equal edges with equal but non-right angles describe the rhombohedral (trigonal) system. Cubic has all angles 90°; triclinic has unequal edges and angles.

In a cubic cell, A atoms are at the corners and the body centre, and B atoms are at the face centres. What is the formula?

  1. AB
  2. A₃B₂
  3. AB₃
  4. A₂B₃
Answer and explanation

Answer: D

A = 8 × 1/8 + 1 = 2; B = 6 × 1/2 = 3. Ratio 2 : 3, so A₂B₃.

Which statement about amorphous solids is NOT correct?

  1. They are isotropic
  2. They soften over a range of temperature
  3. They have a definite heat of fusion
  4. Glass and rubber are examples
Answer and explanation

Answer: C

Amorphous solids have no definite heat of fusion because their particles are not in identical surroundings; crystalline solids have a definite one. The other statements are correct.

Classify bronze, S₈, quartz (SiO₂), MgO and solid CO₂ in that order.

  1. Metallic, molecular, covalent, ionic, molecular
  2. Ionic, covalent, molecular, ionic, metallic
  3. Metallic, covalent, covalent, ionic, ionic
  4. Covalent, molecular, metallic, ionic, molecular
Answer and explanation

Answer: A

Bronze is an alloy (metallic); S₈ and CO₂ are discrete molecules (molecular); quartz is a covalent network; MgO is made of Mg²⁺ and O²⁻ ions (ionic).

Which of these is a hydrogen-bonded molecular solid?

  1. Naphthalene
  2. Ice
  3. Silicon carbide
  4. Potassium chloride
Answer and explanation

Answer: B

Ice is made of H₂O molecules joined by hydrogen bonds. Naphthalene is a non-polar molecular solid, SiC a covalent network solid and KCl an ionic solid.

AgCl is doped with CdCl₂ so that the mole fraction of Cd²⁺ is 1 × 10⁻⁴. How many cation vacancies are there per mole of AgCl?

  1. 6.022 × 10²³
  2. 1.2 × 10²⁰
  3. 3.0 × 10¹⁹
  4. 6.0 × 10¹⁹
Answer and explanation

Answer: D

Each Cd²⁺ replaces two Ag⁺ (one site occupied, one left vacant), so vacancies = moles of Cd²⁺ = 1 × 10⁻⁴ mol per mole. Number = 1 × 10⁻⁴ × 6.022 × 10²³ = 6.0 × 10¹⁹.

Assertion: a Schottky defect lowers the density of a crystal. Reason: in a Schottky defect equal numbers of cations and anions are missing from the lattice. Choose the correct option.

  1. Both true; reason explains assertion
  2. Both true; reason does not explain assertion
  3. Assertion true, reason false
  4. Both assertion and reason are false
Answer and explanation

Answer: A

Both statements are true, and because ions are actually missing (mass lost while volume stays nearly the same), the reason explains why the density falls.

Which of these shows a metal deficiency defect?

  1. Fe₀.₉₄O
  2. NaCl heated in sodium vapour
  3. ZnO heated strongly
  4. AgBr with Ag⁺ in interstitial sites
Answer and explanation

Answer: A

In Fe₀.₉₄O there are fewer iron ions than oxide ions; some Fe²⁺ are missing and others become Fe³⁺ to keep neutrality. Heated NaCl and ZnO show metal excess defects, and interstitial Ag⁺ in AgBr is a Frenkel defect.

What is an F centre?

  1. A cation sitting in an interstitial site
  2. A missing cation-anion pair
  3. An anion vacancy occupied by an unpaired electron
  4. A foreign ion of higher charge
Answer and explanation

Answer: C

When an alkali halide is heated in the metal's vapour, electrons occupy the sites left empty by anions. Such an anion vacancy holding an electron is an F centre; it absorbs visible light and colours the crystal.

Which defect lowers the density of a crystal?

  1. Frenkel defect
  2. Schottky defect
  3. Interstitial cation and electron in ZnO
  4. A cation moving to an interstitial site
Answer and explanation

Answer: B

In a Schottky defect equal numbers of cations and anions leave the crystal, so mass decreases while the volume stays almost the same: density falls. In a Frenkel defect the ion only moves within the crystal.

Privacy · Terms · Refunds · Delivery