Unit 7 Chemical Kinetics
Practice questions
Why does powdered marble react faster with dilute HCl than the same mass of marble chips?
- Powder has a lower activation energy
- Powder has a larger surface area, so more collisions occur per second
- Powder is a catalyst
- Chips contain less CaCO₃
Answer and explanation
Answer: B
The reaction happens at the solid's surface. Grinding the same mass into powder greatly increases the surface exposed to acid, so more particles collide per second; Ea is unchanged.
For a reaction with Ea = 75 kJ mol⁻¹ at 300 K, roughly what fraction of collisions have enough energy? (e^(−30) ≈ 9.4 × 10⁻¹⁴)
- About 9 × 10⁻¹⁴
- About 3 × 10⁻²
- About 9 × 10⁻³⁰
- About 0.30
Answer and explanation
Answer: A
Ea/RT = 75000 ÷ (8.314 × 300) = 75000 ÷ 2494 = 30.07. f = e^(−30.07) ≈ 8.7 × 10⁻¹⁴, about 9 × 10⁻¹⁴: fewer than one collision in 10¹³ is energetic enough.
What is the activation energy if the rate of a reaction doubles when the temperature rises from 300 K to 310 K? (R = 8.314 J K⁻¹ mol⁻¹)
- About 5.8 kJ mol⁻¹
- About 53.6 kJ mol⁻¹
- About 107 kJ mol⁻¹
- About 2.3 kJ mol⁻¹
Answer and explanation
Answer: B
Ea = 2.303R log 2 × T₁T₂/(T₂ − T₁) = 2.303 × 8.314 × 0.3010 × (300 × 310 ÷ 10) = 5.764 × 9300 = 5.36 × 10⁴ J mol⁻¹ = 53.6 kJ mol⁻¹.
The rate constant for a first-order reaction is 1.0 × 10⁻⁴ s⁻¹ and [A]₀ = 0.020 M. What is [A] after 2 hours? (e^(−0.72) = 0.487)
- 0.0097 M
- 0.0103 M
- 0.0144 M
- 0.0049 M
Answer and explanation
Answer: A
kt = 1.0 × 10⁻⁴ s⁻¹ × 7200 s = 0.72. [A] = [A]₀e^(−kt) = 0.020 × 0.487 = 0.00974 ≈ 0.0097 M.
For a first-order reaction, about how many half-lives are needed for 99% completion?
- 3.3
- 6.6
- 10
- 100
Answer and explanation
Answer: B
t(99%) = (2.303/k) log(100/1) = 4.606/k. t½ = 0.693/k. Ratio = 4.606 ÷ 0.693 = 6.6 half-lives.
A zero-order reaction with [X]₀ = 0.50 M has t½ = 25 min. What is t½ if [X]₀ = 0.20 M?
- 25 min
- 62.5 min
- 10 min
- It cannot be predicted
Answer and explanation
Answer: C
For zero order t½ = [X]₀/2k, so t½ is proportional to [X]₀. t½ = 25 × (0.20/0.50) = 10 min. (k = 0.50 ÷ 50 = 0.010 M min⁻¹; 0.20 ÷ 0.020 = 10 min.)
In a first-order reaction 30% of A decomposes in 20 min. What is the half-life? (log(10/7) = 0.1549)
- 38.9 min
- 33.3 min
- 28.6 min
- 14.0 min
Answer and explanation
Answer: A
[A]₀/[A] = 100/70. k = (2.303/20) × 0.1549 = 0.11515 × 0.1549 = 0.01784 min⁻¹. t½ = 0.693 ÷ 0.01784 = 38.9 min.
A first-order reaction has k = 0.0231 min⁻¹ and [A]₀ = 0.40 M. What is [A] after 60 min? (ln 4 = 1.386)
- 0.30 M
- 0.20 M
- 0.10 M
- 0.05 M
Answer and explanation
Answer: C
ln([A]₀/[A]) = kt = 0.0231 × 60 = 1.386 = ln 4. So [A]₀/[A] = 4 and [A] = 0.40 ÷ 4 = 0.10 M (two half-lives, since t½ = 0.693/0.0231 = 30 min).
Which pair of statements is correct for the I⁻-catalysed decomposition of H₂O₂, whose slow step is H₂O₂ + I⁻ → H₂O + IO⁻?
- Rate = k[H₂O₂]²; the slow step is unimolecular
- Rate = k[H₂O₂][I⁻]; the slow step is bimolecular
- Rate = k[H₂O₂]; I⁻ is a product
- Rate = k[I⁻]; the overall order is zero
Answer and explanation
Answer: B
The rate-determining step involves one H₂O₂ and one I⁻, so it is bimolecular, and the rate law is Rate = k[H₂O₂][I⁻], matching experiment. I⁻ is regenerated in the second step, so it is a catalyst.
Assertion: for a zero-order reaction, doubling the reactant concentration leaves the rate unchanged. Reason: for zero order, Rate = k[A]⁰ = k.
- Both true; reason explains assertion
- Both true; reason does not explain assertion
- Assertion true, reason false
- Both false
Answer and explanation
Answer: A
Since [A]⁰ = 1, the rate equals k and does not depend on [A]; so the assertion is true and the reason is exactly why.
The rate constant of a reaction is 3.4 × 10⁻⁵ L mol⁻¹ s⁻¹. What is its order?
- Zero
- First
- Third
- Second
Answer and explanation
Answer: D
The unit of k is (mol L⁻¹)¹⁻ⁿ s⁻¹. L mol⁻¹ s⁻¹ = (mol L⁻¹)⁻¹ s⁻¹, so 1 − n = −1 and n = 2.
For A + B → products the initial rates are: [A] 0.1, [B] 0.1 → x; [A] 0.3, [B] 0.1 → 9x; [A] 0.1, [B] 0.3 → 3x. What is the rate law?
- Rate = k[A][B]²
- Rate = k[A][B]
- Rate = k[A]²[B]
- Rate = k[A]²[B]²
Answer and explanation
Answer: C
Tripling [A] multiplies the rate by 9 = 3²: second order in A. Tripling [B] triples the rate: first order in B. Rate = k[A]²[B].
N₂O₅ disappears at 4.0 × 10⁻³ mol L⁻¹ s⁻¹ in N₂O₅ → 2NO₂ + ½O₂. What are the rates of formation of NO₂ and O₂?
- 8.0 × 10⁻³ and 2.0 × 10⁻³ mol L⁻¹ s⁻¹
- 2.0 × 10⁻³ and 8.0 × 10⁻³ mol L⁻¹ s⁻¹
- 4.0 × 10⁻³ and 4.0 × 10⁻³ mol L⁻¹ s⁻¹
- 1.6 × 10⁻² and 1.0 × 10⁻³ mol L⁻¹ s⁻¹
Answer and explanation
Answer: A
Rate = −d[N₂O₅]/dt = (1/2)d[NO₂]/dt = 2 d[O₂]/dt. d[NO₂]/dt = 2 × 4.0 × 10⁻³ = 8.0 × 10⁻³; d[O₂]/dt = 4.0 × 10⁻³ ÷ 2 = 2.0 × 10⁻³ mol L⁻¹ s⁻¹.
In 2SO₂ + O₂ → 2SO₃, oxygen is consumed at 16 g per minute at one instant. At what rate is SO₃ formed?
- 0.5 mol min⁻¹
- 1.0 mol min⁻¹
- 2.0 mol min⁻¹
- 0.25 mol min⁻¹
Answer and explanation
Answer: B
16 g O₂ ÷ 32 g mol⁻¹ = 0.50 mol min⁻¹. From the equation, 2 mol SO₃ form per mol O₂ used, so SO₃ forms at 2 × 0.50 = 1.0 mol min⁻¹.
For 2NO₂ → 2NO + O₂, −d[NO₂]/dt = k₁[NO₂]², d[NO]/dt = k₂[NO₂]² and d[O₂]/dt = k₃[NO₂]². What is the relation between k₁, k₂ and k₃?
- k₁ = k₂ = k₃
- 2k₁ = 2k₂ = k₃
- k₁ = 2k₂ = k₃
- k₁ = k₂ = 2k₃
Answer and explanation
Answer: D
Rate = −(1/2)d[NO₂]/dt = (1/2)d[NO]/dt = d[O₂]/dt, so k₁/2 = k₂/2 = k₃. Multiply by 2: k₁ = k₂ = 2k₃.
For a reaction, ΔH (forward) = −40 kJ mol⁻¹ and Ea (forward) = 60 kJ mol⁻¹. What is Ea for the backward reaction?
- 20 kJ mol⁻¹
- 60 kJ mol⁻¹
- −100 kJ mol⁻¹
- 100 kJ mol⁻¹
Answer and explanation
Answer: D
Ea(forward) − Ea(backward) = ΔH. So Ea(backward) = Ea(forward) − ΔH = 60 − (−40) = 100 kJ mol⁻¹. For an exothermic reaction the backward barrier is higher.
According to k = Ae^(−Ea/RT), which statement is correct?
- As the temperature becomes very high, k approaches A
- Raising [reactant] increases the rate of a zero-order reaction
- A plot of ln k against T is a straight line
- Increasing Ea increases k at a fixed temperature
Answer and explanation
Answer: A
As T becomes very large, Ea/RT → 0 and e^(−Ea/RT) → 1, so k → A. Zero-order rates do not depend on concentration, ln k is linear in 1/T (not T), and a larger Ea makes k smaller.
Which quantity is NOT changed by adding a catalyst?
- Activation energy
- Rate constant
- Reaction pathway
- ΔH of the reaction
Answer and explanation
Answer: D
A catalyst provides a new path with lower activation energy, so k and the rate increase. The reactants and products are unchanged, so ΔH of the reaction stays the same.
A plot of ln k against 1/T for a reaction obeying the Arrhenius equation is
- a straight line with positive slope Ea/R
- a straight line with negative slope −Ea/R
- a curve rising steeply
- a horizontal line
Answer and explanation
Answer: B
ln k = ln A − (Ea/R)(1/T) is y = c + mx with slope m = −Ea/R, which is negative because Ea is positive.
A rate constant is 1.5 × 10⁻³ s⁻¹ at 300 K and 4.5 × 10⁻³ s⁻¹ at 320 K. What is Ea? (log 3 = 0.4771, R = 8.314 J K⁻¹ mol⁻¹)
- about 4.4 kJ mol⁻¹
- about 19.0 kJ mol⁻¹
- about 87.7 kJ mol⁻¹
- about 43.9 kJ mol⁻¹
Answer and explanation
Answer: D
log(k₂/k₁) = log 3 = 0.4771. T₁T₂/(T₂ − T₁) = 300 × 320 ÷ 20 = 4800 K. Ea = 2.303 × 8.314 × 0.4771 × 4800 = 19.147 × 0.4771 × 4800 = 4.385 × 10⁴ J mol⁻¹ ≈ 43.9 kJ mol⁻¹.