Unit 10 Map Projection

Practice questions

The polar zenithal equal area projection is used mainly for:

  1. navigation charts of the tropics
  2. political and distribution maps of polar regions
  3. maps of the equatorial belt only
  4. maps where shapes must be perfect everywhere
Answer and explanation

Answer: B

The chapter states it is used for political and distribution maps of polar regions, and for general maps of large areas in the northern hemisphere.

For a polar zenithal equidistant projection with R = 4 cm and a 15° interval, how many circles are drawn from the pole to the equator, and what is the spacing?

  1. 3 circles, 2.09 cm apart
  2. 6 circles, 1.05 cm apart
  3. 6 circles, 2.09 cm apart
  4. 12 circles, 1.05 cm apart
Answer and explanation

Answer: B

Number of intervals = 90 ÷ 15 = 6. Spacing = 2π × 4 × 15 ÷ 360 = 25.133 ÷ 24 = 1.047, about 1.05 cm. Check: 6 × 1.047 = 6.28 cm = quarter circumference.

For a polar zenithal equal area projection with R = 5 cm, the radius of the 60° parallel is: (sin 15° = 0.2588)

  1. 2.59 cm
  2. 2.62 cm
  3. 5 cm
  4. 1.29 cm
Answer and explanation

Answer: A

r = 2R sin((90° - 60°) ÷ 2) = 10 × sin 15° = 10 × 0.2588 = 2.588, about 2.59 cm. 2.62 cm is the equidistant radius (arc).

In which projection does the distance between parallels decrease towards the poles while meridians stay equally spaced?

  1. Cylindrical equidistant
  2. Polar zenithal equidistant
  3. Gnomonic
  4. Cylindrical equal area
Answer and explanation

Answer: D

In Lambert's cylindrical equal area projection the parallels lie at R sin φ from the equator, so they crowd together towards the poles, balancing the east-west stretch.

On a cylindrical equidistant projection with R = 2 cm and a 30° interval, the spacing between parallels is about:

  1. 1 cm
  2. 0.52 cm
  3. 1.05 cm
  4. 2.09 cm
Answer and explanation

Answer: C

Meridian length = πR = 6.283 cm for 180°. Spacing = 6.283 × 30 ÷ 180 = 1.047, about 1.05 cm, the same as the meridian interval 2πR ÷ 12.

On a cylindrical equal area projection with R = 2 cm, the 60° parallel lies at what distance from the equator? (sin 60° = 0.866)

  1. 2.09 cm
  2. 1.73 cm
  3. 1 cm
  4. 2 cm
Answer and explanation

Answer: B

Distance = R sin φ = 2 × 0.866 = 1.732, about 1.73 cm. 2.09 cm would be the equidistant spacing for two intervals of 30°.

A world map comparing the areas under wheat in different countries should use which kind of projection?

  1. Equal area
  2. True shape
  3. Gnomonic
  4. Any projection, since areas are always true
Answer and explanation

Answer: A

Areas must be comparable, so an equal area projection is needed. On a true-shape projection high-latitude countries would look too large.

Which pair is correctly matched?

  1. Orthomorphic - equal area
  2. Homolographic - true shape
  3. Equidistant - correct area everywhere
  4. Homolographic - equal area
Answer and explanation

Answer: D

Homolographic means equal area and orthomorphic means true shape. Equidistant projections keep true scale only along some lines.

On a normal cylindrical projection, the 60° parallel is drawn as long as the equator. Compared with the globe, it is stretched by a factor of:

  1. 2
  2. 0.5
  3. 1.15
  4. 1.41
Answer and explanation

Answer: A

On the globe the 60° parallel is 2πR cos 60° = half the equator. On the map it equals the equator, so it is stretched by 1 ÷ 0.5 = 2.

A zenithal projection with the plane tangent at a point between a pole and the equator is called:

  1. polar zenithal
  2. equatorial zenithal
  3. oblique zenithal
  4. transverse zenithal
Answer and explanation

Answer: C

The chapter names three aspects: polar (tangent at a pole), equatorial (tangent on the equator) and oblique (tangent between a pole and the equator).

In the stereographic projection, the light source is placed:

  1. at the centre of the globe
  2. on the globe's surface diametrically opposite the point of contact
  3. at infinity
  4. on the equator
Answer and explanation

Answer: B

Stereographic: light at the periphery opposite the point of contact. Gnomonic: light at the centre. Orthographic: light at infinity.

For a map of a country lying between 30° N and 50° N, the most suitable developable surface is a:

  1. normal cylinder
  2. plane tangent at the pole
  3. transverse cylinder only
  4. cone
Answer and explanation

Answer: D

Conical projections are suitable for middle latitudes, and a secant cone with standard parallels inside the belt reduces distortion further.

In a perspective projection, the graticule is drawn:

  1. from the shadow cast by a light illuminating the globe on to a developable surface
  2. only by calculation, without any light
  3. by tracing a photograph
  4. by joining places of equal height
Answer and explanation

Answer: A

Perspective projections are made with the help of the shadow cast from an illuminated globe on to a developable surface. Non-perspective projections are calculated.

Taking the earth's radius as 6,400 km, a reduced globe of radius 3.2 cm corresponds to a scale of:

  1. 1:2,000,000
  2. 1:20,000,000
  3. 1:200,000,000
  4. 1:320,000,000
Answer and explanation

Answer: C

6,400 km = 640,000,000 cm. 640,000,000 ÷ 3.2 = 200,000,000, so the scale is 1:200,000,000.

Which statement about map projections is correct?

  1. A good projection keeps shape, area, distance and direction all correct
  2. Every projection distorts at least one of shape, area, distance or direction
  3. Distortion occurs only on small-scale maps
  4. Only perspective projections are distorted
Answer and explanation

Answer: B

A sphere is not developable, so no projection can keep all properties true at once; it can only keep one or balance them.

Why does the polar zenithal equal area projection keep areas correct?

  1. Because its parallels are equally spaced
  2. Because the scale along the meridians decreases in the same proportion as the scale along the parallels increases
  3. Because the light source is at infinity
  4. Because it shows only the equator correctly
Answer and explanation

Answer: B

The decrease in scale along the meridians balances the increase along the parallels, so each small area keeps its true size. Equal spacing is the property of the equidistant version.

For a polar zenithal equal area projection with R = 4 cm, the radius of the 30° parallel is: (sin 30° = 0.5)

  1. 4 cm
  2. 2 cm
  3. 4.19 cm
  4. 8 cm
Answer and explanation

Answer: A

r = 2R sin((90° - 30°) ÷ 2) = 2 × 4 × sin 30° = 8 × 0.5 = 4 cm.

For a polar zenithal equidistant projection with R = 3 cm and a 30° interval, the radius of the equator circle is about:

  1. 4.24 cm
  2. 3.14 cm
  3. 1.57 cm
  4. 4.71 cm
Answer and explanation

Answer: D

Interval = 2π × 3 × 30 ÷ 360 = 1.571 cm. The equator is three intervals from the pole: 3 × 1.571 = 4.712, about 4.71 cm. 4.24 cm is the equal area radius.

In the polar zenithal equidistant projection, which scale is correct?

  1. Scale along the parallels
  2. Scale in every direction everywhere
  3. Scale along the meridians
  4. No scale is correct anywhere
Answer and explanation

Answer: C

The parallels are spaced at true distances, so the scale along the meridians is correct, while the scale along the parallels increases away from the centre.

In a polar zenithal projection, the parallels appear as:

  1. straight lines
  2. concentric circles centred on the pole
  3. arcs meeting at the equator
  4. ellipses
Answer and explanation

Answer: B

The pole is the centre of the projection and the parallels are concentric circles around it; the meridians are straight radii.

Privacy · Terms · Refunds · Delivery