Unit 11 Thematic Mapping

Practice questions

A planner wants to see exactly where within each district the cattle are concentrated. Which method helps more?

  1. Dot method
  2. Choropleth method
  3. Chorochromatic method
  4. A general reference map
Answer and explanation

Answer: A

Dots are placed where the cattle actually are, so the dot map shows variation within each district. A choropleth gives one shade to the whole district.

In interpreting a choropleth map, identifying whether the units are states, districts or taluks is the step of identifying the:

  1. theme
  2. legend values
  3. concentration
  4. scale of the administrative units
Answer and explanation

Answer: D

One of the chapter's steps is to identify the scale of the administrative regions shown, which tells you how detailed the pattern can be.

Made-up data: district P has 24,00,000 people on 6,000 km², and district Q has 14,00,000 on 2,000 km². Which statement is correct?

  1. P is denser, with 400 per km²
  2. Q is denser, with 700 per km², against P's 400
  3. Both have the same density
  4. P is denser because it has more people
Answer and explanation

Answer: B

P: 24,00,000 ÷ 6,000 = 400 per km². Q: 14,00,000 ÷ 2,000 = 700 per km². Q is more crowded although P has more people.

The correct order of shading in a five-class choropleth is:

  1. darkest for very low to lightest for very high
  2. random colours for each class
  3. lightest for very low to darkest for very high
  4. the same shade for all classes
Answer and explanation

Answer: C

Shades must run in order, light for low values and dark for high values, so the pattern can be read at a glance.

Using that interval of 240 from a minimum of 250, the third (medium) class is:

  1. 730 - 970
  2. 490 - 730
  3. 250 - 490
  4. 970 - 1,210
Answer and explanation

Answer: A

Classes: 250-490, 490-730, 730-970, 970-1,210, 1,210-1,450. The third is 730-970.

Made-up data: maximum 1,450, minimum 250. The class interval for five classes is:

  1. 290
  2. 340
  3. 1,200
  4. 240
Answer and explanation

Answer: D

Range = 1,450 - 250 = 1,200. Interval = 1,200 ÷ 5 = 240.

Which data set should NOT be shown directly as a choropleth map without first converting it?

  1. Literacy rate of districts
  2. Population density of taluks
  3. Total population of districts
  4. Percentage of area under forest
Answer and explanation

Answer: C

Totals make large units look dark just because they are large. They should be converted to density or shown with dots; rates, densities and percentages suit choropleths.

On a dot map with one dot = 25,000 persons, a district has 42 dots. Its population is about:

  1. 4,20,000
  2. 10,50,000
  3. 25,42,000
  4. 1,68,000
Answer and explanation

Answer: B

42 × 25,000 = 10,50,000 persons.

Made-up data, one dot = 5,000 persons: units have 1,22,000; 47,000; and 8,000 people. The numbers of dots are:

  1. 25, 9 and 2
  2. 24, 9 and 1
  3. 24, 10 and 2
  4. 24, 9 and 2
Answer and explanation

Answer: D

Divide and round to the nearest whole number: 1,22,000 ÷ 5,000 = 24.4 → 24; 47,000 ÷ 5,000 = 9.4 → 9; 8,000 ÷ 5,000 = 1.6 → 2. So the dots are 24, 9 and 2.

When placing dots for paddy area, a large lake inside a district should be:

  1. given extra dots
  2. given one large dot
  3. treated as a negative area and left without dots
  4. shaded dark
Answer and explanation

Answer: C

Lakes, marshes and river beds are negative areas for crops and are left without dots, first shaded lightly in pencil and erased later.

Dots on a dot map should be:

  1. of different sizes for each district
  2. round and uniform, about 1-1.5 mm across
  3. as large as possible
  4. placed evenly regardless of geography
Answer and explanation

Answer: B

Dots should be round and of uniform size, about 1-1.5 mm, and placed according to geographical conditions.

Made-up data: the highest unit has 92,000 cattle and the lowest 3,000. Which dot value lets both appear without overcrowding the highest?

  1. One dot = 1,000 cattle
  2. One dot = 100 cattle
  3. One dot = 50,000 cattle
  4. One dot = 5,00,000 cattle
Answer and explanation

Answer: A

At 1,000 per dot the highest gets 92 dots and the lowest 3. At 100 the highest needs 920 dots; at 50,000 or more the lowest gets no dot.

Which concept is a thematic map NOT normally used to display?

  1. Density
  2. Movements
  3. Spatial relationships
  4. The exact time of day
Answer and explanation

Answer: D

Thematic maps display density, distribution, relative magnitudes, gradients, spatial relationships and movements, not clock time.

John Snow's 1854 map of London is remembered because it:

  1. was the first map projection
  2. showed the first census of India
  3. used the mapped spread of cholera to analyse a problem
  4. showed land use with colours
Answer and explanation

Answer: C

The chapter describes Snow's cholera map as the first thematic map used for problem analysis; the clustering of cases pointed to a water source.

A map shows only the average annual rainfall of a state using lines of equal rainfall. This is:

  1. a general reference map
  2. a thematic map of the isopleth type
  3. a choropleth map
  4. a dot map
Answer and explanation

Answer: B

It emphasises one theme (rainfall), so it is thematic, and lines joining places of equal value make it an isopleth map.

Which statement correctly compares the two methods?

  1. Choropleth maps show variation within a unit better than dot maps
  2. Dot maps are used for ratios and choropleths for absolute numbers
  3. Both methods need no data
  4. Dot maps show absolute numbers and variation within units; choropleths show ratios with each unit shaded uniformly
Answer and explanation

Answer: D

Dots are placed where the item occurs, showing absolute numbers and internal variation; a choropleth gives one shade per unit for a ratio, hiding internal variation.

In interpreting a choropleth, the value of each shade is found from the:

  1. north arrow
  2. scale bar
  3. legend
  4. title
Answer and explanation

Answer: C

The legend (key) gives the range of values that each shade represents.

Why is a choropleth map of raw total population misleading?

  1. Large units look dark simply because they are large, not because they are crowded
  2. Totals cannot be shown on any map
  3. Totals are always the same in every district
  4. Choropleth maps cannot show numbers
Answer and explanation

Answer: A

A big district may have a large total but low density. Choropleths are meant for ratios such as density, so totals should be converted first or shown with dots.

Made-up data: 7,200 ha of a taluk's 24,000 ha cropped area is under cotton. The percentage under cotton is:

  1. 3.3 percent
  2. 33 percent
  3. 72 percent
  4. 30 percent
Answer and explanation

Answer: D

Percentage = 7,200 ÷ 24,000 × 100 = 0.3 × 100 = 30 percent.

Made-up data: a district has 15,00,000 people and an area of 2,500 km². Its population density is:

  1. 6,000 per km²
  2. 600 per km²
  3. 60 per km²
  4. 1,667 per km²
Answer and explanation

Answer: B

Density = population ÷ area = 15,00,000 ÷ 2,500 = 600 persons per km².

Privacy · Terms · Refunds · Delivery