Unit 12 Representation of Geographical Data
Practice questions
Which pairing of data and diagram is correct?
- Monthly rainfall of one station - pie diagram
- Yields of rice in five states - pie diagram
- Population of a town at each census - pie diagram
- Shares of crops in a taluk's cropped area - pie diagram
Answer and explanation
Answer: D
Shares of crops are parts of one whole, so a pie suits them. Monthly rainfall suits bars, yields of different states suit bars, and census populations over time suit a line graph.
Made-up data: components 150, 90 and 60 of a total of 300. Their sector angles are:
- 150°, 90° and 60°
- 90°, 54° and 36°
- 180°, 108° and 72°
- 200°, 100° and 60°
Answer and explanation
Answer: C
Each unit is 360 ÷ 300 = 1.2°: 150 × 1.2 = 180°, 90 × 1.2 = 108°, 60 × 1.2 = 72°. Check: 180 + 108 + 72 = 360°.
Made-up data: on a pie diagram, a sector of 126° represents what percentage of the whole?
- 12.6 percent
- 35 percent
- 126 percent
- 45 percent
Answer and explanation
Answer: B
Percentage = 126 ÷ 360 × 100 = 35 percent. Check: 35 × 3.6 = 126°.
Made-up data: canal 30, tank 15 and well 55 thousand hectares are irrigated in a district. On a percentage bar, the well's part on a 10 cm bar is:
- 5.5 cm
- 3 cm
- 1.5 cm
- 55 cm
Answer and explanation
Answer: A
Total = 30 + 15 + 55 = 100, so well = 55 percent. On a 10 cm bar, 55 percent = 5.5 cm.
Made-up data: values 48, 36 and 12 thousand tonnes at 1 cm = 6 thousand tonnes give bars of:
- 4.8, 3.6 and 1.2 cm
- 6, 4 and 2 cm
- 8, 6 and 3 cm
- 8, 6 and 2 cm
Answer and explanation
Answer: D
48 ÷ 6 = 8 cm; 36 ÷ 6 = 6 cm; 12 ÷ 6 = 2 cm.
Why should the value axis of a bar diagram start at zero?
- So that bar lengths are proportional to the values
- So that bars are of equal width
- Because the x-axis must be labelled
- So that the bars can be shaded
Answer and explanation
Answer: A
If the axis starts above zero, a bar for 60 and one for 30 would not be in the ratio 2:1, and the comparison would mislead.
Two lines on a polygraph come closer together over time. This shows that:
- both variables are falling
- the difference between the two variables is narrowing
- the scale has changed
- both variables have become zero
Answer and explanation
Answer: B
The vertical distance between the lines is the difference between the variables; a narrowing gap means the difference is getting smaller.
Made-up data: birth rate 28 and death rate 9 per 1,000. On a polygraph the gap between the lines represents a natural increase of:
- 37 per 1,000
- 19 per 1,000
- 3.1 per 1,000
- 9 per 1,000
Answer and explanation
Answer: B
Natural increase = 28 - 9 = 19 per 1,000.
In a polygraph of rice, wheat and pulses output, what makes the three lines distinguishable?
- Different line patterns or colours, explained in a key
- Different scales for each line
- Drawing each on a separate graph
- Different x-axes
Answer and explanation
Answer: A
A polygraph uses one common scale, with a different line pattern (continuous, broken, dotted) or colour for each variable and a key.
Made-up data: a value fell from 250 to 200. The percentage change is:
- a fall of 25 percent
- a fall of 50 percent
- a fall of 20 percent
- a rise of 20 percent
Answer and explanation
Answer: C
Change = 200 - 250 = -50. Percentage = 50 ÷ 250 × 100 = 20 percent, a fall. 25 percent wrongly divides by the new value.
Made-up data: maximum value 87. Which scale fits a y-axis of about 10 cm best?
- 1 cm = 10 units
- 1 cm = 1 unit
- 1 cm = 50 units
- 1 cm = 100 units
Answer and explanation
Answer: A
87 ÷ 10 = 8.7 cm fits well. 1 unit per cm needs 87 cm; 50 or 100 per cm gives a cramped graph under 2 cm.
A line graph is most suitable for:
- shares of land use in one year
- soil types of a district
- the yields of five crops in one state
- the growth of a city's population from 1951 to 2021
Answer and explanation
Answer: D
Change of one variable over time is time-series data, best shown by a line graph.
Two made-up values, 9,000 and 36,000, are shown by circles. If the smaller circle has a radius of 1 cm, the larger should have a radius of:
- 4 cm
- 1.5 cm
- 2 cm
- 3 cm
Answer and explanation
Answer: C
Area is proportional to value: ratio 36,000 ÷ 9,000 = 4. Radius ratio = √4 = 2, so radius = 2 cm.
Which group contains only one-dimensional diagrams?
- Line graph, bar diagram, star diagram
- Square, circle, pie
- Cube, sphere, block pile
- Pie, cube, bar
Answer and explanation
Answer: A
Line graphs, bars and star diagrams show value by length alone. Squares, circles and pies are two-dimensional; cubes, spheres and block piles three-dimensional.
Systematically collected numerical facts presented in a table to serve a purpose are called:
- isopleths
- statistics
- projections
- legends
Answer and explanation
Answer: B
The chapter defines statistics as numerical data collected in a systematic manner for some purpose and presented in tabulated form.
After rounding, a student's sector angles add up to 359°. What should be done?
- Add 1° to the sector whose rounding lost the most
- Leave a 1° gap in the circle
- Redraw with a bigger circle
- Add 1° to every sector
Answer and explanation
Answer: A
The angles must total exactly 360°. Add the missing degree to the component that was rounded down the most, which changes the diagram least.
Which data set is NOT suitable for a pie diagram?
- Land use of a district by category
- Workers of a town by sector
- Rice yield in kg per hectare of five states
- Share of continents in world wheat area
Answer and explanation
Answer: C
Yields of different states do not add up to a meaningful whole, so a pie makes no sense; a bar diagram suits them. The others are parts of one total.
Made-up data: a component of 54 out of a total of 240. Its angle is:
- 81°
- 54°
- 22.5°
- 64.8°
Answer and explanation
Answer: A
Angle = 54 ÷ 240 × 360 = 0.225 × 360 = 81°.
A component forms 25 percent of the total. Its sector angle is:
- 25°
- 45°
- 180°
- 90°
Answer and explanation
Answer: D
Angle = 25 × 3.6 = 90°, a quarter of the circle.
The angle of a sector in a pie diagram is calculated as:
- value × 360
- (value ÷ total) × 360°
- (total ÷ value) × 100
- value ÷ 360
Answer and explanation
Answer: B
Each sector's angle is its share of the total multiplied by the 360° of the circle.