• Practice
  • About 15 min
  • 5 practice questions

Policy-rate problems: repo with haircuts, rate transmission and direction traps

Work out how much can be borrowed under a repo after a haircut and the securities needed for a given amount, calculate repo interest and the effect of a benchmark change on a loan, and avoid direction traps.

If something looks wrong, please tell us.

Policy-rate questions at practice level test two things: whether you can do the small calculations that sit behind a repo or a benchmark-linked loan, and whether you know which way each tool pushes. This lesson does both. As in the foundation course, every rate, ratio, risk weight and amount here is invented and labelled 'suppose'; none is an actual current figure.

Repo with a haircut

In a repo the central bank lends against securities, but not against their full market value. A haircut is deducted to protect the lender if the securities fall in price. So: amount that can be borrowed = market value × (1 − haircut), and working backwards, securities needed = amount wanted ÷ (1 − haircut). As with an exit load, dividing by (1 − haircut) is not the same as adding the haircut on top.

Repo interest

Interest = amount borrowed × rate × days ÷ 365. A one-day repo costs one 365th of the yearly rate. For speed, choose figures that make the division clean, or work out the cost of one day first and multiply.

Transmission to a benchmark-linked loan

For a loan priced at external benchmark + spread, a change in the benchmark changes the loan rate by the same number of percentage points at the next reset, while the spread stays as agreed. The yearly interest on an outstanding amount changes by roughly outstanding × change in rate. Several changes before a reset are netted: a rise of 0.5 point and a fall of 0.25 point leave a net rise of 0.25 point.

Direction traps

Direction of each tool (tendencies, not certainties)
StepEffect on money banks can lendUsual pressure on lending rates
Raise CRR or SLRLessUpward
Cut CRR or SLRMoreDownward
Raise repo rateBorrowing from the central bank costs moreUpward
Cut repo rateBorrowing from the central bank costs lessDownward

Two more traps: in a repo the bank borrows and in a reverse repo the bank lends; and the bank rate is lending without a repurchase agreement, so it does not involve a haircut on securities sold and bought back.

Worked example 1: securities needed and the cost

Suppose a bank needs ₹450 crore for 7 days under a repo with a 10% haircut, and suppose the repo rate were 7.3% a year. Working: securities needed = 450 ÷ 0.9 = ₹500 crore. Interest = 450 crore × 0.073 × 7 ÷ 365: one day costs 450 × 0.073 ÷ 365 = ₹0.09 crore = ₹9 lakh, so 7 days cost ₹63 lakh. Adding 10% to 450 would give ₹495 crore, which is too little: 495 × 0.9 = 445.5.

Worked example 2: a benchmark rise

Suppose a ₹40 lakh home loan is priced at an external benchmark of 6% plus a spread of 2.75%, that is 8.75%. The benchmark rises by 0.5 point. Working: new rate at reset = 6.5 + 2.75 = 9.25%. Yearly interest on ₹40 lakh rises by about 40,00,000 × 0.005 = ₹20,000.

Worked example 3: mixed signals

Suppose the central bank cuts the CRR and at the same time raises the repo rate. Working: the CRR cut releases money for lending, while the repo rise makes borrowing from the central bank costlier. The two push in opposite directions; a question asking which step 'increases lendable resources' wants the CRR cut, and one asking which step 'raises banks' cost of borrowing from the central bank' wants the repo rise.

Borrowable = securities × (1 − haircut). Securities needed = amount ÷ (1 − haircut). Loan rate change at reset = benchmark change; yearly interest change ≈ outstanding × change.

Key takeaways: apply the haircut by multiplying by (1 − h) and work back by dividing by it; cost a repo day by day; benchmark changes pass to the loan at reset with the spread unchanged; net several changes before a reset; and answer direction questions from the table, keeping repo (bank borrows) apart from reverse repo (bank lends).

Check your understanding

  1. 1. Suppose a bank offers securities worth ₹300 crore under a repo with a 5% haircut. How much can it borrow?

    1. ₹315 crore
    2. ₹300 crore
    3. ₹15 crore
    4. ₹285 crore
    Show answer

    Answer: D. Borrowable = 300 × 0.95 = ₹285 crore. ₹15 crore is the haircut itself.

  2. 2. Suppose a bank needs ₹540 crore under a repo with a 10% haircut. What value of securities must it offer?

    1. ₹594 crore
    2. ₹540 crore
    3. ₹600 crore
    4. ₹486 crore
    Show answer

    Answer: C. Securities = 540 ÷ 0.9 = ₹600 crore. ₹594 crore adds 10% on top, and 594 × 0.9 = 534.6, which falls short.

  3. 3. Suppose a bank borrows ₹200 crore under a one-day repo and suppose the repo rate were 7.3% a year. What is the interest?

    1. ₹40 lakh
    2. ₹4 lakh
    3. ₹14.6 crore
    4. ₹40,000
    Show answer

    Answer: B. Interest = 200,00,00,000 × 0.073 ÷ 365 = ₹4,00,000. ₹14.6 crore is a full year's interest.

  4. 4. Suppose a ₹50 lakh loan is linked to an external benchmark that falls by 0.25 point. By about how much does the yearly interest fall after the reset?

    1. ₹1,25,000
    2. ₹25,000
    3. ₹1,250
    4. ₹12,500
    Show answer

    Answer: D. 50,00,000 × 0.0025 = ₹12,500 a year.

  5. 5. Which step would tend to reduce the money banks have available to lend?

    1. Cutting the CRR
    2. Cutting the repo rate
    3. Raising the CRR
    4. Cutting the SLR
    Show answer

    Answer: C. Raising the CRR locks up more of NDTL with the central bank, leaving less to lend. The other steps work the other way.

Privacy · Terms · Refunds · Delivery