Revision notes

Payment Systems: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Classifying systems at speed: the six-question grid

Operator, value, gross or net, timing, push or pull, customer speed. Fast for the customer is not the same as gross and real-time between banks.

SystemOperatorSettlement between banksDirection
RTGSRBIGross, real-timePush
NEFTRBINet, deferred, batchesPush
IMPSNPCINet, deferred (instant customer credit)Push
UPINPCINet, deferred (instant customer credit)Push, or pull by collect request
NACHNPCINet, deferredCredit is push; debit is pull
CTSNPCINet, deferredPull (cheque presented by payee's bank)

Key takeaways: six questions classify any system: operator, value, gross or net, timing, push or pull, customer speed; only RTGS is gross and real-time; NPCI operates UPI, IMPS, NACH and CTS, and RBI operates RTGS and NEFT while regulating all; and instant customer credit never by itself means gross real-time settlement.

Read the full lesson

Lesson 2

Netting arithmetic at speed: matrices, net positions and liquidity saved

Net position = column total (receives) − row total (pays). Net positions sum to zero. Amount moved under multilateral netting = sum of positive positions. Liquidity saving = 1 − (amount moved ÷ gross total).

Invented payments in one session (₹ crore)
Pays \ ReceivesABCDRow total
A-20015050400
B120-80100300
C9060-40190
D3070110-210
Column total2403303401901,100

Key takeaways: a matrix with row and column totals gives every bank's net position at once; positions sum to zero; the amount moved is the sum of positive positions; liquidity saving is one minus moved over gross; and multilateral netting moves no more than bilateral netting, which moves no more than gross.

Read the full lesson

Lesson 3

Liquidity in real-time gross settlement: queues and gridlock

A queued set can be settled together if, for every bank, opening balance + incoming − outgoing is not negative. Total funds in the system never change; they only move.

Key takeaways: in gross settlement each payment is funded in full or queued; liquidity comes from balances, incoming payments and any intraday borrowing; gridlock is a circular wait; offsetting settles a set together when every resulting balance is non-negative; and total funds are conserved, which is a quick check on any answer.

Read the full lesson

Lesson 4

Settlement risk in deferred net systems: when a bank cannot pay

Unwinding removes the failed bank's payments and recalculates every position. A net receiver can become a net payer. Controls: collateral, guarantee arrangements, limits, and legal finality.

Key takeaways: net positions depend on every participant's payments; unwinding a failed bank can turn a net receiver into a net payer; collateral, guarantee arrangements and limits allow settlement to be completed instead; the PSS Act, 2007 gives legal backing to netting and settlement finality; and gross real-time systems avoid the problem by settling each payment finally.

Read the full lesson

Lesson 5

Cheques, NACH and cards from the banks' side: sessions, returns and net positions

CTS: presenting bank receives, drawee pays; a return reverses it. NACH credit: sponsor pays destinations; NACH debit: destinations pay sponsor. Cards: issuer pays acquirer.

Key takeaways: in CTS presenting banks receive and drawee banks pay, and a return reverses the flow; in NACH the sponsor bank acts for the user institution, paying destination banks on credits and receiving from them on debits; in card settlement issuers pay acquirers and each bank is netted across both roles; and every set of positions must sum to zero.

Read the full lesson

Lesson 6

Choosing the right system: matching a need to a payment design

Need-to-system matching
Need describedBest fitReason from the design
A very large payment that must be final at onceRTGSGross and real-time: each payment settles alone and is final
Salaries for hundreds of employees on one dayNACH creditBulk push: one file from the sponsor bank to many destination banks
Premiums or EMIs collected every month under a signed mandateNACH debitPull under a standing mandate, repeated without fresh instructions
A small transfer to a friend that must arrive instantly, even late at nightUPI or IMPSRetail systems that credit the customer at once; NEFT also runs at any hour but credits only after a batch
Paying a shopkeeper by scanning a codeUPIPay by a virtual payment address; the customer approves with a PIN
A moderate payment, no hurry, from net bankingNEFTPush in batches; final after the batch settles
A payee holding a paper instrumentCheque through CTSThe image travels to the drawee bank; the payee's bank presents it

Large and final: RTGS. Bulk and repeated: NACH. Instant retail credit: UPI or IMPS. Paper: cheque through CTS. Moderate and not urgent: NEFT.

Key takeaways. Ask whether the need is one-off or repeated, who starts it, and what finality is required. Match large-and-final to RTGS, bulk-and-repeated to NACH, instant retail to UPI or IMPS, paper to CTS and moderate-and-unhurried to NEFT. Reject any option that fails on even one filter.

Read the full lesson

Lesson 7

Following one payment end to end: references, returns and where it can fail

Instruction, debit, settlement, credit, reference. If the credit step fails, the system returns the money to the remitting bank, which re-credits the remitter.

Where a payment can fail
FailureWhat happensWho acts
Beneficiary account closed or frozen, or IFSC does not matchThe beneficiary's bank cannot credit and returns the paymentRemitting bank re-credits the remitter
Wrong but valid account number typedThe money is credited to a stranger, because credit goes by account numberRemitter must report at once; the banks can request the holder's consent to return it
Debit done but no credit and no return yet (UPI or IMPS)The transaction is pending or has failed after the debitBank or app used for the payment investigates; the amount is reversed if the credit did not occur

Key takeaways. A push payment passes instruction, debit, settlement, credit and reference. A failure before credit ends in a return and a re-credit to the remitter. A wrong but valid account number is the dangerous case because the credit succeeds. Customer-side speed in UPI and IMPS removes the batch wait of NEFT.

Read the full lesson

Lesson 8

Cards and prepaid wallets: who is who, who pays whom, and the arithmetic

Debit, credit and prepaid compared
InstrumentWhere the money comes fromKey feature
Debit cardThe customer's own bank account, debited at once or within a short settlementSpending is limited by the balance; no borrowing
Credit cardA credit line from the issuer; the customer repays laterInterest-free period only if the bill is paid in full by the due date; otherwise interest
Prepaid instrument (wallet or prepaid card)Value loaded in advance by the customerSpending is limited to the loaded balance; the balance is not a deposit account

Debit takes your money now. Credit lends you money, free only if repaid in full by the due date. Prepaid spends only what you loaded. Merchant gets the bill minus MDR.

Key takeaways. Debit uses your balance now, credit lends, prepaid uses loaded value. The issuer pays the acquirer, and the acquirer pays the merchant minus the MDR. Pay a credit card bill in full by the due date to avoid interest; paying only the minimum leaves a balance that attracts interest. A prepaid instrument cannot overspend.

Read the full lesson

Lesson 9

Mixed statement and assertion-reason questions on payment systems

Test each claim on its own against the grid. One wrong word makes a whole statement false.

Key takeaways. Most false statements are one of six swaps. Judge each statement on its own and count. In assertion-reason questions judge A, then R, then the link. Fast customer credit, net settlement and the identity of the operator are the three places where marks are lost.

Read the full lesson

Privacy · Terms · Refunds · Delivery