• Foundation
  • About 15 min
  • 5 practice questions

Basic solids revisited: the formulas you will combine

Recall the surface area and volume formulas of the cuboid, cube, cylinder, cone, sphere and hemisphere, and use them correctly with the right units.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the six basic solids and state the curved surface area, total surface area and volume of each.
  • Find the slant height of a cone from its radius and height.
  • Work out areas in square units and volumes in cubic units, and change cm³ into litres.

Look around a kitchen or a school laboratory and you will see objects that are not one simple shape: a test tube is a tube with a rounded bottom, a water tanker is a long tube with rounded ends, and a toy top is a cone fixed to a half-ball. This chapter is about finding the surface area and volume of such combined solids. Before we combine shapes, we need the formulas for the basic solids at our fingertips, because every combined problem is solved by breaking it into these pieces.

The six basic solids

Basic solids in this chapter

  • Solids with flat faces
    • Cuboid: length l, breadth b, height h
    • Cube: every edge a
  • Solids with a curved surface
    • Cylinder: radius r, height h
    • Cone: radius r, height h, slant height l
    • Sphere: radius r
    • Hemisphere: half a sphere, radius r
Every combined solid in this chapter is built from these pieces.

Two kinds of surface area are used. The curved surface area (CSA), also called lateral surface area, is only the curved or side part. The total surface area (TSA) adds the flat faces too, such as the circular ends of a cylinder. Volume is the space a solid occupies; for a hollow container we call it capacity.

Formulas to know by heart
SolidCurved / lateral surface areaTotal surface areaVolume
Cuboid2h(l + b)2(lb + bh + hl)l × b × h
Cube4a²6a²a³
Cylinder2πrh2πr(r + h)πr²h
Coneπrlπr(l + r)⅓πr²h
Sphere4πr²4πr²⁴⁄₃πr³
Hemisphere2πr²3πr²⅔πr³

Slant height of a cone: l = √(h² + r²). Areas are in square units (cm², m²); volumes are in cubic units (cm³, m³). 1 litre = 1000 cm³ and 1 m³ = 1000 litres.

Notice two patterns. A cone holds exactly one third of a cylinder with the same radius and height. A hemisphere's total surface area is 3πr² because it has a curved part (2πr²) and a flat circular face (πr²). Unless a question says otherwise, we take π = 22/7, so choosing radii that are multiples of 7 keeps the arithmetic clean.

Worked example 1: a solid cone

A solid cone has base radius 7 cm and height 24 cm. Find its slant height, curved surface area, total surface area and volume.

  1. Slant height: l = √(24² + 7²) = √(576 + 49) = √625 = 25 cm.
  2. CSA = πrl = (22/7) × 7 × 25 = 22 × 25 = 550 cm².
  3. Area of the base = πr² = (22/7) × 7 × 7 = 154 cm², so TSA = 550 + 154 = 704 cm².
  4. Volume = ⅓πr²h = ⅓ × 154 × 24 = 154 × 8 = 1232 cm³.

Worked example 2: a hemispherical bowl

A hemispherical steel bowl has inner radius 10.5 cm. Find the area of its inner curved surface and its capacity in litres.

  1. Inner CSA = 2πr² = 2 × (22/7) × 10.5 × 10.5. Since 10.5 ÷ 7 = 1.5, this is 2 × 22 × 1.5 × 10.5 = 693 cm².
  2. Capacity = ⅔πr³ = ⅔ × (22/7) × 10.5 × 10.5 × 10.5 = ⅔ × 3638.25 = 2425.5 cm³.
  3. In litres: 2425.5 ÷ 1000 = 2.4255 litres, about 2.43 litres.

Check: the bowl is open, so we used only the curved surface (2πr²), not 3πr². Reading the situation carefully decides which formula is right.

Key takeaways

Key takeaways: learn the six sets of formulas as a table; find the slant height of a cone with l = √(h² + r²) before using πrl; decide from the situation whether a flat face is part of the surface; keep units consistent and convert cm³ to litres by dividing by 1000. Every combined-solid question in the next lessons uses these formulas as building blocks.

Check your understanding

  1. 1. A cone has radius 5 cm and height 12 cm. What is its slant height?

    1. 17 cm
    2. 13 cm
    3. 15 cm
    4. 11 cm
    Show answer

    Answer: B. l = √(h² + r²) = √(144 + 25) = √169 = 13 cm. Adding 12 + 5 = 17 is a common mistake: the slant height comes from Pythagoras, not from adding.

  2. 2. What is the total surface area of a solid hemisphere of radius 7 cm? (Take π = 22/7.)

    1. 308 cm²
    2. 616 cm²
    3. 462 cm²
    4. 154 cm²
    Show answer

    Answer: C. TSA of a solid hemisphere = curved part 2πr² + flat circle πr² = 3πr² = 3 × (22/7) × 49 = 3 × 154 = 462 cm². 308 cm² is only the curved part.

  3. 3. Find the volume of a cylinder of radius 7 cm and height 10 cm. (Take π = 22/7.)

    1. 1540 cm³
    2. 440 cm³
    3. 770 cm³
    4. 3080 cm³
    Show answer

    Answer: A. V = πr²h = (22/7) × 7 × 7 × 10 = 154 × 10 = 1540 cm³.

  4. 4. A cone and a cylinder have the same base radius and the same height. What is the ratio of the volume of the cone to the volume of the cylinder?

    1. 3 : 1
    2. 1 : 2
    3. 1 : 3
    4. 2 : 3
    Show answer

    Answer: C. Volume of cone : volume of cylinder = ⅓πr²h : πr²h = ⅓ : 1 = 1 : 3.

  5. 5. What is the surface area of a sphere of radius 3.5 cm? (Take π = 22/7.)

    1. 38.5 cm²
    2. 77 cm²
    3. 179.67 cm²
    4. 154 cm²
    Show answer

    Answer: D. Surface area = 4πr² = 4 × (22/7) × 3.5 × 3.5 = 4 × 22 × 0.5 × 3.5 = 154 cm².

Sign in to keep track of the lessons you finish.

Next lesson → Surface area of solids joined together

Privacy · Terms · Refunds · Delivery