• Foundation
  • About 18 min
  • 5 practice questions

Surface area when a part is scooped out

Find the total surface area of a solid from which a cone or hemisphere has been hollowed out, by removing the opening and adding the new inner surface.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why hollowing out can increase the surface area of a solid.
  • Find the surface area of a cylinder with a conical or hemispherical cavity.
  • Find the surface area of a cube with a hemispherical depression.

Carpenters and toy makers often cut shapes out of a solid block: a hollow in a wooden block to hold a ball, or cups scooped out of both ends of a log. Removing material always reduces the volume, but the surface area can go up, because the inside of the hollow becomes new surface that you can touch.

The cut-out rule

When a hollow is made, two things happen to the surface. The flat circle where the hollow opens is no longer there, so its area is removed. The inside wall of the hollow is now exposed, so its curved area is added.

Joining solids vs scooping out

  • Joining (lesson 2)
    • Glued faces disappear
    • Add the outer surfaces still visible
    • Volume = sum of volumes
  • Scooping out (this lesson)
    • The opening circle disappears
    • The inner curved wall is added
    • Volume = big solid − removed part

Cut-out rule: surface area of remaining solid = original surface area − area of the opening + area of the new inner surface.

Worked example 1: a cone hollowed from a cylinder

From a solid cylinder of height 8 cm and radius 6 cm, a cone of the same height and radius is hollowed out from one end. Find the total surface area of what remains. (Take π = 3.14.)

  1. Slant height of the cone l = √(8² + 6²) = √100 = 10 cm.
  2. Remaining surfaces: the curved surface of the cylinder, the one flat base that is still solid, and the inside of the cone.
  3. CSA of cylinder = 2πrh = 2π × 6 × 8 = 96π cm².
  4. Remaining base = πr² = 36π cm² (the other base became the cone's opening).
  5. Inner cone surface = πrl = π × 6 × 10 = 60π cm².
  6. Total = 96π + 36π + 60π = 192π = 192 × 3.14 = 602.88 cm².

Worked example 2: hemispheres scooped from both ends

A solid wooden cylinder of height 12 cm and radius 3.5 cm has a hemisphere of the same radius scooped out of each end. Find the total surface area of the article. (Take π = 22/7.)

  1. Both flat ends are removed completely, because each hemisphere has the same radius as the cylinder.
  2. CSA of cylinder = 2πrh = 2 × (22/7) × 3.5 × 12 = 22 × 12 = 264 cm².
  3. Two inner hemispherical surfaces = 2 × 2πr² = 4 × (22/7) × 3.5 × 3.5 = 154 cm².
  4. Total = 264 + 154 = 418 cm².

Worked example 3: a cube with a hollow

A hemispherical depression of diameter 14 cm is cut into one face of a wooden cube of edge 14 cm. Find the surface area of the remaining solid.

  1. TSA of cube = 6 × 14² = 6 × 196 = 1176 cm².
  2. Opening removed: πr² = (22/7) × 7 × 7 = 154 cm².
  3. Inner hemisphere added: 2πr² = 308 cm².
  4. Surface area = 1176 − 154 + 308 = 1330 cm².
What changes in each case
SolidRemoveAdd
Cylinder with a cone hollowed from one endOne circular base (πr²)Cone's curved surface (πrl)
Cylinder with hemispheres scooped from both endsBoth circular bases (2πr²)Two hemispherical surfaces (4πr²)
Cube with a hemispherical depressionCircle on one face (πr²)Hemisphere's curved surface (2πr²)

Common mistakes

  • Forgetting that one flat base of the cylinder still remains when the cone is cut from only one end.
  • Using the diameter in place of the radius.
  • Subtracting the curved area of the hollow, as if it were volume; for area, the inner wall is added.

Key takeaways

Key takeaways: for a cut-out, remove the area of the opening and add the inner wall; the result can be larger than the original surface area; draw a quick sketch and tick each surface you can touch before calculating.

Check your understanding

  1. 1. A hemisphere of diameter 7 cm is scooped out of one face of a cube of edge 7 cm. Find the surface area of the remaining solid. (Take π = 22/7.)

    1. 294 cm²
    2. 332.5 cm²
    3. 255.5 cm²
    4. 371 cm²
    Show answer

    Answer: B. TSA of cube = 6 × 49 = 294 cm². Remove πr² = (22/7) × 3.5 × 3.5 = 38.5 cm²; add 2πr² = 77 cm². Total = 294 − 38.5 + 77 = 332.5 cm².

  2. 2. A cone of the same radius (7 cm) and height (24 cm) is hollowed out of one end of a solid cylinder. Find the total surface area of the remaining solid. (Take π = 22/7.)

    1. 1606 cm²
    2. 1914 cm²
    3. 1760 cm²
    4. 1210 cm²
    Show answer

    Answer: C. Slant height = √(24² + 7²) = 25 cm. CSA of cylinder = 2 × (22/7) × 7 × 24 = 1056 cm². Remaining base = 154 cm². Inner cone = (22/7) × 7 × 25 = 550 cm². Total = 1056 + 154 + 550 = 1760 cm².

  3. 3. A hemisphere of radius r is scooped out of one face of a cube (r is less than half the edge). How does the total surface area change?

    1. It decreases by πr²
    2. It increases by πr²
    3. It increases by 2πr²
    4. It does not change
    Show answer

    Answer: B. The opening πr² is removed and the inner wall 2πr² is added, so the change is 2πr² − πr² = +πr².

  4. 4. From each end of a solid cylinder of height 10 cm and radius 3.5 cm, a hemisphere of the same radius is scooped out. Find the total surface area. (Take π = 22/7.)

    1. 374 cm²
    2. 220 cm²
    3. 297 cm²
    4. 451 cm²
    Show answer

    Answer: A. CSA of cylinder = 2 × (22/7) × 3.5 × 10 = 220 cm². Two hemispheres = 4 × (22/7) × 3.5 × 3.5 = 154 cm². Both bases are fully removed. Total = 220 + 154 = 374 cm².

  5. 5. Assertion (A): When a cone with the same base as a cylinder is hollowed out from one end, the total surface area of the remaining solid is CSA of cylinder + CSA of cone. Reason (R): The circular base at the hollowed end is no longer part of the surface.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true but R is false
    4. A is false but R is true
    Show answer

    Answer: D. R is true: the base at the hollowed end becomes the opening of the cone. But A is false, because the other circular base is still there, so the correct total is CSA of cylinder + CSA of cone + πr².

Sign in to keep track of the lessons you finish.

Next lesson → Volume of a combination of solids

Privacy · Terms · Refunds · Delivery